 | Adapt-A-Valve for Braided Hose
Brand: Organic Part Number: STVFPT
<BR>Supply adaptor for braided supply hose (tubing). Allows you to connect up to tubing that will not accept a saddle valve.<BR> This is pretty simple to install with the cold water turned off, you remove the cold water supply tube. Place this device on the valve connection that you just removed the cold water supply tube from. Screw the cold water supply tube on to the new connection.<BR>Done, not as easy as an SV-6 connection, but with care and caution you can easily accomplish it. <BR>Supply adaptor for braided supply hose (tubing). Allows you to connect up to tubing that will not accept a saddle valve.<BR> This is pretty simple to install with the cold water turned off, you remove the cold water supply tube. Place this device on the valve connection that you just removed the cold water supply tube from. Screw the cold water supply tube on to the new connection.<BR>Done, not as easy as an SV-6 connection, but with care and caution you can easily accomplish it. <BR> | *$10.88 |
 | RO MIGHTY MITE SYSTEM 50GPD
Brand: Organic/AWI Part Number: 1MM
<BR>MIGHTY MITE The Mighty Mite is a complete RO (Reverse Osmosis) reef and drinking water system designed for those on a budget. Featuring three stages of filtration, this system is ideal for apartment dwellers, people on the go, or those that own campers or Recreational Vehicles. This system should also be used by people sprouting beans or making beer. Both activities require high-quality water. This system can be taken anywhere and with a faucet diverter, you can purify water on the move. The Mighty Mite can be used on city tap water or well water as it purifies water using a Reverse Osmosis membrane. Depending upon water temperature and pressure, this unit can deliver between 20 and 50 gallons for pure drinking water a day. That's 1 to 2 gallons per hour. The pre-filters process up to 1,500 gallons of water. The Reverse Osmosis membrane lasts an average of three to five years. The Mighty Mite weighs just seven pounds and is only 15 inches long, seven inches tall, and six inches deep. For further convenience, it folds to become smaller for easier storage. The unit comes complete with a full size in-line sediment filter, a full size in-line GAC (Granulated Activated Carbon) filter, and a TFC (Thin Film Composite) RO membrane. Also included are a faucet diverter valve, preset flow control, tubing, a diagram, and instructions. Reefkeepers may expand this unit into a full featured RO/DI system by simply adding an in-line DI cartridge. Our quick connect push-in fittings truly make this system plug-n-play! Add any of the options below. No extra shipping. <BR>MIGHTY MITE The Mighty Mite is a complete RO (Reverse Osmosis) reef and drinking water system designed for those on a budget. Featuring three stages of filtration, this system is ideal for apartment dwellers, people on the go, or those that own campers or Recreational Vehicles. This system should also be used by people sprouting beans or making beer. Both activities require high-quality water. | *$108.88 |
 | Macho Lunch Cooler
Brand: Outdoor Active Gear Model: WCLDCA2
The macho lunch cooler is a durable soft cooler that has an impressive and distinguished look | *$21.50 |
 | P3 International Chemical Free Water Conditioner (P3-P7920) Category: Water Filtration
Brand: P3 International Part Number: P3-P7920
Item #: P3-P7920. Limescale buildup is a serious problem in any household with residue that can become as hard as stone, causing a decrease in water pressure and showerheads to spray in every direction. Your pipes and appliances may clog with deposits requiring expensive solutions.<br><br>The Chemical Free Water Conditioner helps to reduce limescale buildup. Compact, cost efficient and maintenance free, it slides over any water pipe. Reduce buildup without reliance on chemicals, using state of the art high-powered ceramic ferrite magnets that polarize salt molecules in hard water. No moving parts or batteries reducing maintenance and operational cost to zero. <br>Customers also search for: Food and Breakroom Supplies\Water and Beverages\Water Filtration Discount P3 International Chemical Free Water Conditioner, Buy P3 International Chemical Free Water Conditioner, Wholesale P3 International Chemical Free Water Conditioner, P3-P7920, Water Filtration | *$21.77 |
 | Panasonic Water Filter Cartridge (PJ-220R)
Brand: Panasonic Model: PJ-220R
Panasonic Water Filter Cartridge (PJ-220R) | *$14.95 |
| | Countertop Water Filter, Maintenance Free, 25k Gallons, Chrome
Brand: Paragon Model: P3060C Part Number: P3060C
Our unique countertop water filter is 100% MAINTENANCE FREE! Once installed, your filter will last for up to 10 years or 25,000 gallons without ever having to change a cartridge! For kitchen or bath! | *$99.95 |
 | Countertop Water Filter, Maintenance Free, 20k Gallons, Black
Brand: Paragon Model: P3060B Part Number: P3060B
Our unique countertop water filter is 100% MAINTENANCE FREE! Once installed, your filter will last for up to 10 years or 20,000 gallons without ever having to change a cartridge! For kitchen or bath! | *$79.95 |
 | Countertop Water Filter, Maintenance Free, 20k Gallons, White
Brand: Paragon Model: P3060W Part Number: P3060W
Our unique countertop water filter is 100% MAINTENANCE FREE! Once installed, your filter will last for up to 10 years or 20,000 gallons without ever having to change a cartridge! For kitchen or bath! | *$69.95 |
 | White Countertop Water Filter
Brand: Paragon Model: 2900CT
White Paragon Countertop water filter. A GAC (granulated activated carbon) cartridge with 1-micron filtration that is NSF-certified to reduce Lead, Chlorine, Taste and odor. Easy no hassle installation. Countertop water filter cartridge removes 97% of Lead, 97% of Mercury, Cryptospridium 99.5%, Giardia 99.5%, VOCs, MTBEs, THMs and Chloramines. Filter Capacity: 1 year for a family of 4. NSF-certified. Replacement cartridge model # 2901RC also sold on Amazon | *$65.95 |
 | Integrated Shower Filter
Brand: Paragon Part Number: WMF1
10,000 gallons integrated, wall mount shower filter with replaceable cartridge. Available in white or chrome. Reduces chlorine by over 99%. Takes virtually no space in shower, easy installation. Paragon Integrated Shower Filter advantages: reduces chlorine by over 99%, reduces hydrogen sulfate, naturally restores hair and skin softness by removing chemicals from water, reduces water-borne Radon, reduces soap and calcium build up on glass doors and tiles. Installs in seconds, no tools required. | *$39.95 |
 | Paragon Shower Hose Water Filter
Brand: Paragon Part Number: PSHF1
Shower hose filter that can be attached to any hand-held shower handle for great filtered water and keep your favorite hand held shower head. SHOWER HEAD NOT INCLUDED! Available in Chrome or Brass. Restores natural softness to skin, scalp and hair by removing harsh drying chemicals from water. Paragon Shower Hose Filter removes up to 99% of chlorine from your water, reduces hydrogen sulfide, eliminates bad taste and odor, reduces calcium and soap film build-up in your shower. Compatible with most hand held shower head models. Installs in seconds, no tools required. Filter Capacity: 5,000 gallons or 6 months. | *$31.49 |
 | Inline refrigerator filter
Brand: Paragon Model: 5150IL
Inline filter easily installs on any refrigerator. Provides pure drinking water or ice cubes from your refrigerator. Capacity of 3,000 gallons or 3 years for a family of 4. | *$24.99 |
 | Granulated Carbon Ice Maker Filter
Brand: Pasco Part Number: 2060
Removes Impurities From Drinking Water. | *$18.50 |
| Granulated Carbon Ice Maker Filter
Brand: Pasco Part Number: 2060-38
Removes Impurities From Drinking Water. | *$18.50 |
 | ZOO Double Stainless Vacuum Bottle for Kids Lunch Box, Blue
Brand: Pearl
This Double stainless steel vacuum bottle has two way drinking. Direct drinking or pour the hot/cold water in a plastic clear cup. The plastic lid can be used as a cup. Also, very convenient with carrying string. Good for your Kids at school, outdoor and any place. (Recommanded retail price is $20. Our price is special promotion price. Don't miss this chance!) | *$14.99 |
 | Sweetfilter Washing Machine Filter Lint Trap Can Double The Life of Septic Tank Systems
Brand: PEC Lint Trap Model: LT-1 Part Number: LT-1
Discharge water from a washing machine is laced with enough lint, hair, and non-biodegradeable fibers to carpet your living room once a year. When it drains into a utility sink, the debris clogs the drainpipes and can destroy your septic tank leach field and treatment system. Our polyester bag traps lint before it enters the drain by fastening it over the end of the washer discharge hose. Replace it every 6-8 weeks or when bypass valve opens. Our LT-1 has a finer mesh to trap more fibers than any other filter tested. One package includes 1 lint trap and locking strap. | *$19.95 |
 | Water Filter Cartridge
Brand: PENTAIR Model: RS2-DS24 Part Number: RS2-DS
String-wound cartridge for whole house water filter Nos.U25, OB1, and OB5 to remove sand, silt, rust, and loose scale (10 nominal micron rating). Also used under sink as a pre-filter in No.OT32 to extend life of No.CB3 carbon block filter in homes with rust and sediment in the water and no whole house water filter. | *$5.47 |
 | Pentek DGD-5005, Dual Gradient Water Filter, 50/5 Micron
Brand: Pentair Model: DGD-5005 Part Number: 155357-43
DGD-5005 Dual-Gradient Polypropylene
#10 Filter, 10" Long
DGD Series are Designed for Purity
Two Separate Gradient Density Layers Enhance Filter Performance
Manufactured from 100% Pure Polypropylene
Will not Impart Taste, Odor or Color to Liquid being Filtered
Superior Chemical Resistance and is Not Prone to Bacterial Attack
Excellent for all Residential, Rural, Municipal and Commercial and Industrial Use
Temperature Rating: 40 °F to 145 °F (4.4 °C to 62.8 °C)
Micron Rating: Pre-Filter - 50 Microns, Post-Filter - 5 Micron
Max Dimensions: 4-1/2" x 9-3/4" (114mm x 248mm)
Initial P (psi) @ Flow Rate (gpm): <1 psi @ 10 gpm (<0.1 bar @ 38 Lpm)
NSF Approved for Material and Structural Integrity
Standard 8 Filters per Case | *$15.75 |
 | Pentair Water FPWF-ORKIT t O-ring Kit Water Filter
Brand: PENTAIR WATER Model: FPWF-ORKIT Part Number: FPWF-ORKIT
"PENTAIR WATER" WATER FILTER
Packed: Carded
Replacement o-rings
Set of 3
Fits all water filters except FH1, WH2, WH3 and WH4 | *$5.99 |
 | Pentek CBC-20BB 20" Carbon Block Water Filter
Brand: Pentek Part Number: CBC-20BB
#20 Filter, 20" Long
- CBC Series Highly Effectively Reduces Unwanted Tastes, Odors and Chlorine Taste and Odor From Your Drinking Water
- 99.5% Reduction of Cryptosporidium, Giardia, Entamoebo and Toxoplasma Cysts*
- Enhanced Dirt Holding Capacity
- Manufactured Using Patented Process and Made Entirely from FDA-Compliant Materials
- Ideal for a Wide Range of Residential, Food Services, Commercial and Industrial Applications
- Make Excellent Polishing Filters and Pre-Filters in Applications Requiring Fine Filtration and High Capacity
- Temperature Rating: 40 °F to 180 °F (4.4 °C to 82.2°C)
- Micron Rating: 0.5 Microns
- Chlorine Taste & Oder Reduction @ Flow Rate: >150,000 Gallons @ 4 gpm* (>567,800 liters @ 15.1 L/min)
- Max Dimensions: 4-5/8" x 20" (117mm x 508mm)
- Initial P (psi) @ Flow Rate (gpm): 8.5 psi @ 4 gpm (0.59 bar @ 15.1 L/min)
- NSF Approved for Material and Structural Integrity
- Standard 4 Filters per Case | *$87.99 |
 | Pentek ECP1-10, 10" Pleated Sediment Water Filter, 1 Micron
Brand: Pentek Part Number: ECP1-10
#10 Filter, 10" Long
- Provides Higher Wet Strength than Regular Cellulose and Polyester Fibers
- Also, Provides High Flow Rates and Dirt Holding Capacity, While Maintaining Extremely Low Pressure Drop
- Manufactured from a Special Formulation of Resin-Impregnated Cellulose and Polyester Fibers
- ECP Series Filter Endcaps Feature a Color-Coding System for Easy Identification Of Micron Rating
- Temperature Rating: 40 °F to 125 °F (4.4 °C to 51.7 °C)
- Micron Rating: 1 Microns (Tan Endcap)
- Max Dimensions: 2-5/8" x 9-3/4" (67mm x 248mm)
- Initial P (psi) @ Flow Rate (gpm): 1 psi @ 10 gpm (<0.1 bar @ 38 Lpm)
- NSF Approved for Material and Structural Integrity
- Standard 24 Filters per Case | *$7.44 |
 | Pentek ECP20, 10" Pleated Sediment Filter
Brand: Pentek
#10 Filter, 10" Long
- Provides Higher Wet Strength than Regular Cellulose and Polyester Fibers
- Also, Provides High Flow Rates and Dirt Holding Capacity, While Maintaining Extremely Low Pressure Drop
- Manufactured from a Special Formulation of Resin-Impregnated Cellulose and Polyester Fibers
- ECP Series Filter Endcaps Feature a Color-Coding System for Easy Identification Of Micron Rating
- Temperature Rating: 40 °F to 125 °F (4.4 °C to 51.7 °C)
- Micron Rating: 20 Microns (Blue Endcap)
- Max Dimensions: 2-5/8" x 9-3/4" (67mm x 248mm)
- Initial P (psi) @ Flow Rate (gpm): 1 psi @ 10 gpm (<0.1 bar @ 38 Lpm)
- NSF Approved for Material and Structural Integrity
- Standard 24 Filters per Case | *$6.65 |
 | Pentek EP-20BB, 20" Carbon Block Water Filter
Brand: Pentek Part Number: EP-20BB
#20 Filter, 20" Long
- EP Series Highly Effective Bad Taste and Odor and Chlorine Taste and Odor Reduction*
- Manufactured Using Patented Process that Yields a Filter a Nominal 5 Micron Filtration Rating, Dirt- Holding Capacity
- Protected by Endurewarp®, a Uniquely Formulated Polyolefin Bilaminate Pre-Filter, Designed to Increase the Life of the Filter
- EP Filters are Manufactured Entirely from FDA-Compliant Materials
- Ideal for a Wide Range of Residential, Food Services, Commercial and Industrial Applications
- Temperature Rating: 40 °F to 180 °F (4.4 °C to 82.2°C)
- Micron Rating: 5 Microns*
- Chlorine Taste & Oder Reduction @ Flow Rate: >40,000 Gallons @ 4gpm* (151,400 liters @15.1 L/min)
- Max Dimensions: 4-5/8" x 20" (118mm x 508mm)
- Initial P (psi) @ Flow Rate (gpm): 5.5 psi @ 5 gpm (0.38 bar @ 19 L/min)
- NSF Approved for Material and Structural Integrity
- Standard 4 Filters per Case | *$59.92 |
 | Pentek WP5BB20P Wound Polypropylene Water Filter, 5 Micron
Brand: Pentek Part Number: WP5BB20P
#20 Filter, 20" Long
- Economical Solution to Reduce Fine Sediment, Including Sand, Silt, Rust and Scale Particles
- Maufactured from Durable Polypropylene Cord that is Wound Around a Rigid Polypropylene Core
- WP Series Filters are Wound in a Precise Pattern to Provide a Greater Surface Area
- Higher Dirt-Loading Capacity and Greater Efficiency than Standard Wound Cartridges
- Temperature Rating: 40 °F to 165 °F (4.4 °C to 73.9 °C)
- Micron Rating: 5 Microns
- Max Dimensions: 4-1/2" x 20" (114mm x 508mm)
- Initial P (psi) @ Flow Rate (gpm): <2.5 psi @ 10 gpm (<0.17 bar @ 30 L/min)
- NSF Approved for Material and Structural Integrity
- Standard 6 Filters per Case | *$47.75 |
 | Pentek ECP1-20BB, 20" Pleated Cellulose/Polyester Water Filter, 1 Micron
Brand: Pentek Part Number: ECP1-20BB
#20 Filter, 20" Long
- Provides Higher Wet Strength than Regular Cellulose and Polyester Fibers
- Also, Provides High Flow Rates and Dirt Holding Capacity, While Maintaining Extremely Low Pressure Drop
- Manufactured from a Special Formulation of Resin-Impregnated Cellulose and Polyester Fibers
- ECP Series Filter Endcaps Feature a Color-Coding System for Easy Identification Of Micron Rating
- Temperature Rating: 40 °F to 125 °F (4.4 °C to 51.7 °C)
- Micron Rating: 1 Microns (Tan Endcap)
- Max Dimensions: 4-1/2" x 20" (114mm x 508mm)
- Initial P (psi) @ Flow Rate (gpm): 1 psi @ 20 gpm (<0.1 bar @ 76 Lpm)
- NSF Approved for Material and Structural Integrity
- Standard 6 Filters per Case | *$35.40 |
 | Pentek CBC-20, 20" Carbon Block Filter
Brand: Pentek
#20 Filter, 20" Long
- CBC Series Highly Effectively Reduces Unwanted Tastes, Odors and Chlorine Taste and Odor >From Your Drinking Water*
- 99.5% Reduction of Cryptosporidium, Giardia, Entamoebo and Toxoplasma Cysts*
- Enhanced Dirt Holding Capacity
- Manufactured Using Patented Process and Made Entirely from FDA-Compliant Materials
- Ideal for a Wide Range of Residential, Food Services, Commercial and Industrial Applications
- Make Excellent Polishing Filters and Pre-Filters in Applications Requiring Fine Filtration and High Capacity
- Temperature Rating: 40 °F to 180 °F (4.4 °C to 82.2°C)
- Micron Rating: 0.5 Microns
- Chlorine Taste & Oder Reduction @ Flow Rate: >45,000 Gallons @ 2 gpm* (>170,300 liters @7.6 L/min)
- Max Dimensions: 2-7/8" x 20" (73mm x 508mm)
- Initial P (psi) @ Flow Rate (gpm): 3.0 psi @ 2 gpm (0.21 bar @ 7.6 L/min)
- NSF Approved for Material and Structural Integrity
- Standard 6 Filters per Case | *$34.82 |
 | Pentek EPM-BB 10" Carbon Block Water Filter
Brand: Pentek
#10 Filter, 10" Long
- EPM Series are a Modied Version the the "EP Series" Filter
- Economically Priced makes This Filter Suitable for Taste, Odor and Chlorine Taste and Odor Reduction
- Highest Carbon Block Dirt-Holding Capacity for Maximum Filter Life
- Manufactered Using a Patented Process and Entirely from FDQ Compliant Material
- Protected by Endurewarp®, a Uniquely Formulated Polyolefin Bilaminate Pre-Filter, Designed to Increase the Life of the Filter
- Ideal Choice for a Wide Range of Residential, Food Service, Commercial and Industrial Applications
- Micron Rating: 10 Micron
- Temperature Rating: 40 °F to 125 °F (4.4 °C to 51.7°C)
- Chlorine Taste & Oder Reduction @ Flow Rate: >15,000 Gallons @ 2 gpm* (>56,750 liters @7.6 L/min)
- Max Dimensions: 4-1/2" x 9-3/4" (118mm x 248mm)
- Initial P (psi) @ Flow Rate (gpm): 5.0 psi @ 2 gpm (0.35 bar @ 7.6 L/min)
- NSF Approved for Material and Structural Integrity
- Standard 4 Filters per Case | *$33.45 |
 | Pentek ECP20-20BB, 20" Pleated 20 Micron Water Filter
Brand: Pentek Part Number: ECP20-20BB
#20 Filter, 20" Long
- Provides Higher Wet Strength than Regular Cellulose and Polyester Fibers
- Also, Provides High Flow Rates and Dirt Holding Capacity, While Maintaining Extremely Low Pressure Drop
- Manufactured from a Special Formulation of Resin-Impregnated Cellulose and Polyester Fibers
- ECP Series Filter Endcaps Feature a Color-Coding System for Easy Identification Of Micron Rating
- Temperature Rating: 40 °F to 125 °F (4.4 °C to 51.7 °C)
- Micron Rating: 20 Microns (Blue Endcap)
- Max Dimensions: 4-1/2" x 20" (114mm x 508mm)
- Initial P (psi) @ Flow Rate (gpm): 1 psi @ 20 gpm (<0.1 bar @ 76 Lpm)
- NSF Approved for Material and Structural Integrity
- Standard 6 Filters per Case | *$32.15 |
| Pentek ECP5-20BB, 20" Pleated Cellulose/Polyester Water Filter, 5 Micron
Brand: Pentek Part Number: ECP5-20BB
#20 Filter, 20" Long
- Provides Higher Wet Strength than Regular Cellulose and Polyester Fibers
- Also, Provides High Flow Rates and Dirt Holding Capacity, While Maintaining Extremely Low Pressure Drop
- Manufactured from a Special Formulation of Resin-Impregnated Cellulose and Polyester Fibers
- ECP Series Filter Endcaps Feature a Color-Coding System for Easy Identification Of Micron Rating
- Temperature Rating: 40 °F to 125 °F (4.4 °C to 51.7 °C)
- Micron Rating: 5 Microns (White Endcap)
- Max Dimensions: 4-1/2" x 20" (114mm x 508mm)
- Initial P (psi) @ Flow Rate (gpm): 1 psi @ 20 gpm (<0.1 bar @ 76 Lpm)
- NSF Approved for Material and Structural Integrity
- Standard 6 Filters per Case | *$32.15 |
 | Pentek ECP50-20BB, 20" Pleated Cellulose/Polyester Water Filter, 50 Micron
Brand: Pentek
#20 Filter, 20" Long
- Provides Higher Wet Strength than Regular Cellulose and Polyester Fibers
- Also, Provides High Flow Rates and Dirt Holding Capacity, While Maintaining Extremely Low Pressure Drop
- Manufactured from a Special Formulation of Resin-Impregnated Cellulose and Polyester Fibers
- ECP Series Filter Endcaps Feature a Color-Coding System for Easy Identification Of Micron Rating
- Temperature Rating: 40 °F to 125 °F (4.4 °C to 51.7 °C)
- Micron Rating: 50 Microns (Yellow Endcap)
- Max Dimensions: 4-1/2" x 20" (114mm x 508mm)
- Initial P (psi) @ Flow Rate (gpm): 1 psi @ 20 gpm (<0.1 bar @ 76 Lpm)
- NSF Approved for Material and Structural Integrity
- Standard 6 Filters per Case | *$32.15 |
 | Pentek CBR2-10R, 10" Carbon Block Multi-media Filter
Brand: Pentek Model: CBR2-10R Part Number: 155403-43
CBR2-10R Carbon Block With Lead Reduction and Flow Control Filter
- #10 Filter, 10" Long
- 99.5% Reduction of Cryptosporidium, Gianrdia, Entamoeba and Toxoplasma Cysts*
- Premium High Capacity Chlorine Taste and Odor Reduction Through More than >20,000 gallons
- CBR2-10 Series are Designed to Reduce Chlorine Taste and Odor, Dissolved and Particulate Lead, Cycts and Certain Volatile Organic Chemicals (VOC)
- Built-In Flow Restrictor (0.6 gpm) to Allow for Maximum Contact Time
- Manufactured Using a Patented Process
- Combine Powdered Activated Carbon with a specially designed Adsorbent Medium for Lead and Mercury Reduction
- Protected by Endurewarp®, a Uniquely Formulated Polyolefin Bilaminate Pre-Filter, Designed to Increase the Life of the Filter
- Temperature Rating: 40 °F to 180 °F (4.4 °C to 82.2°C)
- Micron Rating: 0.5 Microns
- Chlorine Taste & Oder Reduction @ Flow Rate: >20,000 Gallons @ 0.6 gpm* (>75,700 liters @2.3 L/min)
- VOC* gal @ gpm: 600 @ 0.6 (2,270 L @ 2.3 L/min)
- Max Dimensions: 2-7/8" x 9-3/4" (73mm x 248mm)
- Flow Restricted to 0.6 gpm (2.3 L/min) with built-in Flow Restrictor)
- NSF Approved for Material and Structural Integrity
- Standard 12 Filters per Case | *$23.32 |
 | Pentek WP.5BB97P Wound Polypropylene Water Filter, 0.5 Micron
Brand: Pentek Part Number: WP-5BB97P
#10 Filter, 10" Long
- Economical Solution to Reduce Fine Sediment, Including Sand, Silt, Rust and Scale Particles
- Maufactured from Durable Polypropylene Cord that is Wound Around a Rigid Polypropylene Core
- WP Series Filters are Wound in a Precise Pattern to Provide a Greater Surface Area
- Higher Dirt-Loading Capacity and Greater Efficiency than Standard Wound Cartridges
- Temperature Rating: 40 °F to 165 °F (4.4 °C to 73.9 °C)
- Micron Rating: 0.5 Microns
- Max Dimensions: 2-1/4" x 9-7/8" (60mm x 251mm)
- Initial P (psi) @ Flow Rate (gpm): <2.5 psi @ 10 gpm (<0.17 bar @ 30 L/min)
- NSF Approved for Material and Structural Integrity
- Standard 8 Filters per Case | *$21.90 |
| Pentek WP1BB97P Wound Polypropylene Water Filter, 1 Micron
Brand: Pentek Part Number: WP1BB97P
#10 Filter, 10" Long
- Economical Solution to Reduce Fine Sediment, Including Sand, Silt, Rust and Scale Particles
- Maufactured from Durable Polypropylene Cord that is Wound Around a Rigid Polypropylene Core
- WP Series Filters are Wound in a Precise Pattern to Provide a Greater Surface Area
- Higher Dirt-Loading Capacity and Greater Efficiency than Standard Wound Cartridges
- Temperature Rating: 40 °F to 165 °F (4.4 °C to 73.9 °C)
- Micron Rating: 5 Microns
- Max Dimensions: 2-1/4" x 9-7/8" (60mm x 251mm)
- Initial P (psi) @ Flow Rate (gpm): <2.5 psi @ 10 gpm (<0.17 bar @ 30 L/min)
- NSF Approved for Material and Structural Integrity
- Standard 8 Filters per Case | *$21.29 |
| Pentek WP5BB97P, Wound Polypropylene Water Filter, 5 Micron
Brand: Pentek Part Number: WP5BB97P
#10 Filter, 10" Long
- Economical Solution to Reduce Fine Sediment, Including Sand, Silt, Rust and Scale Particles
- Maufactured from Durable Polypropylene Cord that is Wound Around a Rigid Polypropylene Core
- WP Series Filters are Wound in a Precise Pattern to Provide a Greater Surface Area
- Higher Dirt-Loading Capacity and Greater Efficiency than Standard Wound Cartridges
- Temperature Rating: 40 °F to 165 °F (4.4 °C to 73.9 °C)
- Micron Rating: 5 Microns
- Max Dimensions: 2-1/4" x 9-7/8" (60mm x 251mm)
- Initial P (psi) @ Flow Rate (gpm): <2.5 psi @ 10 gpm (<0.17 bar @ 30 L/min)
- NSF Approved for Material and Structural Integrity
- Standard 8 Filters per Case | *$21.00 |
 | Pentek EP-20, 20" Carbon Block Filter
Brand: Pentek Part Number: EP-20
#20 Filter, 20" Long
- EP Series Highly Effective Bad Taste and Odor and Chlorine Taste and Odor Reduction*
- Manufactured Using Patented Process that Yields a Filter a Nominal 5 Micron Filtration Rating, Dirt- Holding Capacity
- Protected by Endurewarp®, a Uniquely Formulated Polyolefin Bilaminate Pre-Filter, Designed to Increase the Life of the Filter
- EP Filters are Manufactured Entirely from FDA-Compliant Materials
- Ideal for a Wide Range of Residential, Food Services, Commercial and Industrial Applications
- Temperature Rating: 40 °F to 180 °F (4.4 °C to 82.2°C)
- Micron Rating: 5 Microns*
- Chlorine Taste & Oder Reduction @ Flow Rate: >12,000 Gallons @ 2gpm* (45,400 liters @7.6 L/min)
- Max Dimensions: 2-7/8" x 20" (73mm x 508mm)
- Initial P (psi) @ Flow Rate (gpm): 3.4 psi @ 2 gpm (0.23 bar @ 7.6 L/min)
- NSF Approved for Material and Structural Integrity
- Standard 6 Filters per Case | *$19.75 |
 | Pentek US-1500 Under Sink Water Filter System
Brand: Pentek Model: US-1500 Part Number: US-1500
The Pentek US-1500 is an under sink water filtration system and uses any of the following water filter cartridge sets: D-250, D-250A, P-250, P-250A. The Pentek US-1500 under sink filters should be replaced every 500 gallons with MTBE reduction or every 1000 gallons without MTBE reduction. The recommended water filter replacement for the Pentek US-1500 is the P-250. This filter set does not remove MTBE. To remove MTBE, purchase the P-250A. Other compatible replacement filters are the Culligan D-250 and the Culligan D-250A. | *$189.74 |
 | Pentek C1-20, 20" Carbon Impregnated Cellulose Filter
Brand: Pentek Part Number: C1-20
#20 Filter, 20" Long
- C Series Offer an Economical Solution for all General-Purpose Water Filtration Needs
- Constructed of a Carbon Impregnated Cellulose
- Dual Purpose Media Filters Out Fine Sediment Particles
- Reduces Unwanted Taste, Odor and Chlorine Taste and Odor from Your Tap Water*
- Polyester Reinforcement backing and External Netting Provide Additional Strength and Dirt-Loading Capacity
- Suited for a Wide Range of Residential Applications and Make Excellent Polishing Filters When Used in Process or Closed-Loop Streams
- Temperature Rating: 40 °F to 125 °F (4.4 °C to 51.7°C)
- Micron Rating: 1 Microns
- Chlorine Taste & Oder Reduction @ Flow Rate: >5,000 Gallons @ 2gpm* (>18,900 liters @7.6 L/min)
- Max Dimensions: 2-5/8" x 20" (67mm x 508mm)
- Initial P (psi) @ Flow Rate (gpm): 1 psi @ 5 gpm (0.1 bar @ 19 L/min)
- NSF Approved for Material and Structural Integrity
- Standard 14 Filters per Case | *$17.75 |
 | Pentek ECP1-BB Pleated Cellulose/Polyester Water Filter, 1 Micron
Brand: Pentek
ECP1-BB Pleated Cellulose-Polyester
#10 Filter, 10" Long
Provides Higher Wet Strength than Regular Cellulose and Polyester Fibers
Also, Provides High Flow Rates and Dirt Holding Capacity, While Maintaining Extremely Low Pressure Drop
Manufactured from a Special Formulation of Resin-Impregnated Cellulose and Polyester Fibers
ECP Series Filter Endcaps Feature a Color-Coding System for Easy Identification Of Micron Rating
Temperature Rating: 40 °F to 125 °F (4.4 °C to 51.7 °C)
Micron Rating: 1 Microns (Tan Endcap)
Max Dimensions: 4-1/2" x 9-3/4" (114mm x 248mm)
Initial P (psi) @ Flow Rate (gpm): 1 psi @ 20 gpm (<0.1 bar @ 76 Lpm)
NSF Approved for Material and Structural Integrity
Standard 8 Filters per Case | *$17.70 |
 | Pentek WPX100BB97P Wound Fibrillated Polypropylene Water Filter, 100 Micron
Brand: Pentek
#10 Filter, 10" Long
- Economical Solution to Reduce Fine Sediment, Including Sand, Silt, Rust and Scale Particles
- Maufactured from Durable Polypropylene Cord that is Wound Around a Rigid Polypropylene Core
- WP Series Filters are Wound in a Precise Pattern to Provide a Greater Surface Area
- No Need to Rise Prior to Installation if Surfactants are a Concern
- Higher Dirt-Loading Capacity and Greater Efficiency than Standard Wound Cartridges
- Temperature Rating: 40 °F to 165 °F (4.4 °C to 73.9 °C)
- Micron Rating: 100 Microns
- Max Dimensions: 4-1/2" x 9-7/8" (60mm x 251mm)
- Initial P (psi) @ Flow Rate (gpm): <2.5 psi @ 10 gpm (<0.17 bar @ 30 L/min)
- NSF Approved for Material and Structural Integrity
- Standard 8 Filters per Case | *$17.68 |
 | Pentek ECP20-BB Pleated 20 Micron Water Filter
Brand: Pentek Part Number: ECP20-BB
ECP20-BB Pleated Cellulose-Polyester
#10 Filter, 10" Long
Provides Higher Wet Strength than Regular Cellulose and Polyester Fibers
Also, Provides High Flow Rates and Dirt Holding Capacity, While Maintaining Extremely Low Pressure Drop
Manufactured from a Special Formulation of Resin-Impregnated Cellulose and Polyester Fibers
ECP Series Filter Endcaps Feature a Color-Coding System for Easy Identification Of Micron Rating
Temperature Rating: 40 °F to 125 °F (4.4 °C to 51.7 °C)
Micron Rating: 20 Microns (Blue Endcap)
Max Dimensions: 4-1/2" x 9-3/4" (114mm x 248mm)
Initial P (psi) @ Flow Rate (gpm): 1 psi @ 20 gpm (<0.1 bar @ 76 Lpm)
NSF Approved for Material and Structural Integrity
Standard 8 Filters per Case | *$17.14 |
 | Pentek ECP50-BB Pleated Cellulose/Polyester Water Filter, 50 Micron
Brand: Pentek
ECP50-BB Pleated Cellulose-Polyester
#10 Filter, 10" Long
Provides Higher Wet Strength than Regular Cellulose and Polyester Fibers
Also, Provides High Flow Rates and Dirt Holding Capacity, While Maintaining Extremely Low Pressure Drop
Manufactured from a Special Formulation of Resin-Impregnated Cellulose and Polyester Fibers
ECP Series Filter Endcaps Feature a Color-Coding System for Easy Identification Of Micron Rating
Temperature Rating: 40 °F to 125 °F (4.4 °C to 51.7 °C)
Micron Rating: 50 Microns (Yellow Endcap)
Max Dimensions: 4-1/2" x 9-3/4" (114mm x 248mm)
Initial P (psi) @ Flow Rate (gpm): 1 psi @ 20 gpm (<0.1 bar @ 76 Lpm)
NSF Approved for Material and Structural Integrity
Standard 8 Filters per Case | *$17.14 |
 | Pentek S1-BB Pleated Cellulose Water Filter, 20 Micron
Brand: Pentek
S1-BB Pleated Cellulose
#10 Filter, 10" Long
S Series Pleated Design Maximizes Dirt-Holding Capacity
An External Netting Helps Keep Uniform Pleat Spacing in High Flow and Pulsating Flow Streams
Designed for General Water Filtration Purposes
Manufactured from a Pleated Cellulose Media
External Netting Sheath Helps Retain Uniform Pleat Spacing in High Flow and Pulsating Flow Stream
Temperature Rating: 40 °F to 145 °F (4.4 °C to 62.8 °C)
Micron Rating: 20 Microns
Max Dimensions: 4-1/2" x 9-3/4" (114mm x 248mm)
Initial P (psi) @ Flow Rate (gpm): 1.2 psi @ 10 gpm (0.08 bar @ 38 Lpm)
Recommended Flow Rate: 20 gpm (76 L/min)
NSF Approved for Material and Structural Integrity
Standard 8 Filters per Case | *$13.85 |
| Pentek ECP5-10, 10" Pleated Sediment Water Filter
Brand: Pentek Part Number: ECP5-10
#10 Filter, 10" Long
- Provides Higher Wet Strength than Regular Cellulose and Polyester Fibers
- Also, Provides High Flow Rates and Dirt Holding Capacity, While Maintaining Extremely Low Pressure Drop
- Manufactured from a Special Formulation of Resin-Impregnated Cellulose and Polyester Fibers
- ECP Series Filter Endcaps Feature a Color-Coding System for Easy Identification Of Micron Rating
- Temperature Rating: 40 °F to 125 °F (4.4 °C to 51.7 °C)
- Micron Rating: 5 Microns (White Endcap)
- Max Dimensions: 2-5/8" x 9-3/4" (67mm x 248mm)
- Initial P (psi) @ Flow Rate (gpm): 1 psi @ 10 gpm (<0.1 bar @ 38 Lpm)
- NSF Approved for Material and Structural Integrity
- Standard 24 Filters per Case | *$13.67 |
 | Pentek NCP-10, 10" Carbon Impregnated Polyester Filter
Brand: Pentek
#10 Filter, 10" Long
- NCP Series Filters are Excellent Polishing Filters, Closed Loop Streams
- Ideal for Post Revese Osmosis and Well Water Applications
- Provides Sediment Filtration and Chlorine and Taste Reduction
- Constructed of a Carbon Impregnated Non-Cellulose Media
- Non-Cellulose Media Resists to Bacterial Attack
- Ideal for Municipal and Non-Chlorinated Water Applications
- Pleated for Maximum Dirt-Holding Capacity
- Temperature Rating: 40 °F to 125 °F (4.4 °C to 51.7°C)
- Micron Rating: 10 Microns
- Chlorine Taste & Oder Reduction @ Flow Rate: 225 Gallons @ 1gpm* (850 liters @3.8 L/min)
- Max Dimensions: 2-1/2" x 9-3/4" (64mm x 248mm)
- Initial P (psi) @ Flow Rate (gpm): 2 psi @ 3 gpm (0.1 bar @ 11 L/min)
- NSF Approved for Material and Structural Integrity
- Standard 24 Filters per Case | *$11.50 |
 | Pentek CBC-10, 10" Carbon Block Filter
Brand: Pentex Filtration Model: CBC-10 Part Number: 155162
#10 Filter, 10" Long
- CBC Series Highly Effectively Reduces Unwanted Tastes, Odors and Chlorine Taste and Odor >From Your Drinking Water
- 99.5% Reduction of Cryptosporidium, Giardia, Entamoebo and Toxoplasma Cysts
- Enhanced Dirt Holding Capacity
- Manufactured Using Patented Process and Made Entirely from FDA-Compliant Materials
- Ideal for a Wide Range of Residential, Food Services, Commercial and Industrial Applications
- Make Excellent Polishing Filters and Pre-Filters in Applications Requiring Fine Filtration and High Capacity
- Temperature Rating: 40 °F to 180 °F (4.4 °C to 82.2°C)
- Micron Rating: 0.5 Microns
- Chlorine Taste & Oder Reduction @ Flow Rate: >20,000 Gallons @ 1 gpm* (>75,700 liters @3.8 L/min)
- Max Dimensions: 2-7/8" x 9-3/4" (73mm x 248mm)
- Initial P (psi) @ Flow Rate (gpm): 3.7 psi @ 1 gpm (0.26 bar @ 3.8 L/min)
- NSF Approved for Material and Structural Integrity
- Standard 12 Filters per Case | *$18.30 |
 | PETRA 40958253010 10-Inch Carded plus Scale Ice Maker Water Filter
Brand: Petra Model: 40958253010 Part Number: 4.095825301e+012
 10" Filter Odor/Taste/Scale; Contains Carbon For Taste & Odor Removal | *$9.85 |
 | The Miracle Mineral Supplement 4 oz Bottle & Citric Acid (MMS)
Brand: PGL International | *$14.45 |
 | In-line Filter
Brand: Planet Matters Model: PM-02 Part Number: PM-02
The ultimate in clean hands free performance filtration products. | *$23.95 |
 | BPA Free 18 Oz. Water Bottle W/filter
Brand: Planet Matters Model: PM18 Part Number: PM18
The 18 Oz. Bottle filters up to 50 Gallons, Approximately $350 in bottled water savings, using Seychelle's Proprietary Ioninc Adsorption filtration system. It is 100% BPA Free and is reuseable, the filters are replaceable and recycleable. Providing you with months of clean water, anytime anywhere. Americas Cheapest, Cleanest, Greenest, Water. Tested to EPA/ANSI protocols and NSF standards 42 and 53. | *$21.95 |
 | 18 Oz. Replacement Filter
Brand: Planet Matters Model: PM-03 Part Number: PM-03 | *$16.95 |
|
