 | Hydraulic-Equipment - Pump, Hand, 2-Speed
Brand: Enerpac Part Number: P-80
Hydraulic-Equipment - Pump, Hand, 2-Speed | *$650.15 |
 | Enerpac Hydraulic Power Workholding Turbo Air/Hydraulic Pump No. PACG-5002SB (1 Each)
Brand: Enerpac Part Number: PACG5002SB
A turbo air pump is recommended where input air pressure is limited. Engineered to recycle exhaust air to help power the pump. Maintains a tight pressure range for reliable clamping performance. Pump will automatically restart in the event of a pressure drop in the hydraulic system. Mounting plate allows for horizontal or vertical machine-side mounting. Buna-N polyurethane and Teflon seals. | *$646.00 |
 | Enerpac Hydraulic Power Workholding Swing Cylinder Long Arm No. CAL-52, Use w/cap.=1,250 lbs. (1 Each)
Brand: Enerpac Part Number: CAL-52
These clamp arms are designed for use with the swing cylinders shown above. Clamp arms can be positioned and tightened without removing the swing cylinder from the fixture. Clamp arm design eliminates the use of a vise when securing to a plunger. Short arms have a tapped hole for buttons and toggle pads. Long arms can be shortened to desired length. | *$63.00 |
 | Enerpac Hydraulic Power Workholding Low Profile Swing Clamp No. ASC-30, Clamp force=1,375 lbs. (1 Each)
Brand: Enerpac Part Number: ASC-30
These low profile swing clamps are designed to swing 97degrees to position the arm over the work piece. A vertical plunger then exerts an upward thrust on the back end of the swing arm providing powerful downward pressure to clamp the work piece. Arm can swing right or left. Operating pressure is 1,200 to 2,500 psi. | *$602.00 |
 | Enerpac H-9206 .25"Id X 6' High Pressure Hose 3/8" Npt Both End
Brand: Enerpac Part Number: 277-H-9206
High pressure hydraulic hoses | *$59.95 |
 | Enerpac Hydraulic Power Workholding Hollow Cylinder, No. RWH-121 (1 Each)
Brand: Enerpac Part Number: RWH-121
These hollow cylinders combine compactness with power and versatility. Any application requiring either a pushing or pulling action is easily handled with this type of cylinder. The cylinders are threaded and can be placed over a bolt or a stud to upgrade most existing manual clamping fixtures. | *$551.00 |
 | Enerpac Hydraulic Power Workholding Swing Cylinder Short Arm No. CAS-121, Use w/cap.=2,600 lbs. (1 Each)
Brand: Enerpac Part Number: CAS-121
These clamp arms are designed for use with the swing cylinders shown above. Clamp arms can be positioned and tightened without removing the swing cylinder from the fixture. Clamp arm design eliminates the use of a vise when securing to a plunger. Short arms have a tapped hole for buttons and toggle pads. Long arms can be shortened to desired length. | *$53.00 |
| Enerpac Hydraulic Power Workholding Swing Cylinder Long Arm No. CAL-22, Use w/cap.=500 lbs. (1 Each)
Brand: Enerpac Part Number: CAL-22
These clamp arms are designed for use with the swing cylinders shown above. Clamp arms can be positioned and tightened without removing the swing cylinder from the fixture. Clamp arm design eliminates the use of a vise when securing to a plunger. Short arms have a tapped hole for buttons and toggle pads. Long arms can be shortened to desired length. | *$52.00 |
 | Enerpac Hydraulic Power Workholding Swing Cylinder w/Arm No. SC-3, M=1-12 (1 Each)
Brand: Enerpac Part Number: SC-3
These swing cylinders rotate 90 degrees as they begin their stroke, continuing without rotation for the final clamping stroke. Cylinders can be changed to left swing, right swing, or pull applications by loosening the side plug and then rotating the plunger to a desired position. The VE-354 and VE-352 have a retract spring for single-acting operations. The VE-360 is only for double-acting operation and has no return spring. Clamp arm provided. Can be mounted with the built-in flange by securing the swinger to the top or bottom of a tooling plate or by screwing the threaded body into a mounting bracket. | *$478.00 |
| | SEPTLS277A13 - Base/Collar/Plunger Attachments
Brand: Enerpac Part Number: 277-A-13
Base/Collar/Plunger Attachments | *$46.04 |
 | Enerpac Hydraulic Power Workholding Hollow Cylinder, No. CY2754-5 (1 Each)
Brand: Enerpac Part Number: CY2754-5
These hollow cylinders combine compactness with power and versatility. Any application requiring either a pushing or pulling action is easily handled with this type of cylinder. The cylinders are threaded and can be placed over a bolt or a stud to upgrade most existing manual clamping fixtures. | *$443.00 |
 | Enerpac Hydraulic Power Workholding Swing Cylinder Short Arm No. CAS-51, Use w/cap.=1,250 lbs. (1 Each)
Brand: Enerpac Part Number: CAS-51
These clamp arms are designed for use with the swing cylinders shown above. Clamp arms can be positioned and tightened without removing the swing cylinder from the fixture. Clamp arm design eliminates the use of a vise when securing to a plunger. Short arms have a tapped hole for buttons and toggle pads. Long arms can be shortened to desired length. | *$44.00 |
 | Enerpac Hydraulic Power Workholding No. SURS51, Light Duty, Single Acting, Upper Flange, w/o Arm (1 Each)
Brand: Enerpac Part Number: SURS-51
These swing cylinders rotate 90 degrees as they begin their stroke, continuing without rotation for the final clamping stroke. Cylinders can be changed to left swing, right swing or pull applications by loosening the bottom plug. All single acting cylinders come with a retract spring for single-acting operations. Max. psi 5,000. Clamp arms not included but sold separately below. Body styles available are threaded with upper flange or non-threaded with lower or upper flange. | *$430.00 |
 | 80400 Hand Pump w/100 Ton Rch Cylinder (277-SCH-1003H) Category: Hydraulic Sets
Brand: Enerpac Part Number: 277-SCH-1003H
Item #: 277-SCH-1003H. Optimum match of individual componentsbrAll hand pumps are two-speed pulliCapacity Wt. = 100 tons [Max]liCylinder Stroke = 3.000 inliCollapsed Height = 10 inliOperating Pressure = 10000.0 psi [Max]liIncludes = RCH-1003 Cylinder, P-80 Hand Pump, HC-7206 Hose, GA-2 Gauge Adaptor, GP-10S GaugeliQuantity = 5 per setliWt. = 169 lb/ul brCustomers also search for: Discount 80400 Hand Pump w/100 Ton Rch Cylinder, Buy 80400 Hand Pump w/100 Ton Rch Cylinder, Wholesale 80400 Hand Pump w/100 Ton Rch Cylinder, 662005804009, SCH-1003H, Hydraulic Sets | *$4,213.62 |
 | Enerpac Hydraulic Power Workholding No. STRS121, Light Duty, Single Acting, Threaded, w/o Arm (1 Each)
Brand: Enerpac Part Number: STRS-121
These swing cylinders rotate 90 degrees as they begin their stroke, continuing without rotation for the final clamping stroke. Cylinders can be changed to left swing, right swing or pull applications by loosening the bottom plug. All single acting cylinders come with a retract spring for single-acting operations. Max. psi 5,000. Clamp arms not included but sold separately below. Body styles available are threaded with upper flange or non-threaded with lower or upper flange. | *$398.00 |
 | Enerpac Hydraulic Power Workholding No. SLRS51, Light Duty, Single Acting, Lower Flange, w/o Arm (1 Each)
Brand: Enerpac Part Number: SLRS-51
These swing cylinders rotate 90 degrees as they begin their stroke, continuing without rotation for the final clamping stroke. Cylinders can be changed to left swing, right swing or pull applications by loosening the bottom plug. All single acting cylinders come with a retract spring for single-acting operations. Max. psi 5,000. Clamp arms not included but sold separately below. Body styles available are threaded with upper flange or non-threaded with lower or upper flange. | *$398.00 |
| Enerpac Hydraulic Power Workholding No. STRD121, Light Duty, Double Acting, Threaded, w/o Arm (1 Each)
Brand: Enerpac Part Number: STRD-121
Hydraulic Power Workholding - Light Duty - These swing cylinders rotate 90° as they begin their stroke, continuing without rotation for the final clamping stroke. Cylinders can be changed to left swing, right swing or pull applications by loosening the bottom plug. All single acting cylinders come with a retract spring for single-acting operations. Max. psi 5,000. Clamp arms not included but sold separately below. Body styles available are threaded with upper flange or non-threaded with lower or upper flange. | *$398.00 |
 | 20123 3/8" Speed D-coupl (277-A-604) Category: Hydraulic Tool Parts and Accessories
Brand: Enerpac Part Number: 277-A-604
Item #: 277-A-604. For medium duty applications, use with hand pumpsbrIncludes female steel dust cap pulliOperating Pressure = 10000.0 psi [Max]liFlow = 2500.0 cu. in./min [Max]liThread Size = 3/8 in (NPTF)liLength = 3.090 inliInside Style = Regular Spee-DliType = Complete Coupler SetliWt. = 1/2 lb/ul brCustomers also search for: Discount 20123 3/8" Speed D-coupl, Buy 20123 3/8" Speed D-coupl, Wholesale 20123 3/8" Speed D-coupl, 662005201235, A-604, Hydraulic Tool Parts and Accessories | *$37.85 |
| Enerpac Hydraulic Power Workholding Hollow Cylinder, No. CY2129-5 (1 Each)
Brand: Enerpac Part Number: CY2129-5
These hollow cylinders combine compactness with power and versatility. Any application requiring either a pushing or pulling action is easily handled with this type of cylinder. The cylinders are threaded and can be placed over a bolt or a stud to upgrade most existing manual clamping fixtures. | *$366.00 |
 | Hydraulic-Equipment - 10 Ton Cylinder, S/A
Brand: Enerpac Model: ENERPAC Part Number: RC-101
Hydraulic-Equipment - 10 Ton Cylinder, S/A | *$340.99 |
 | Enerpac Hydraulic Power Workholding Jam Nut No. JN-12, 1 7/8-16 (1 Each)
Brand: Enerpac Part Number: FN-481 | *$34.00 |
 | Enerpac Hydraulic Power Workholding Sequence Valve For Time Interval Control No. V-2000 (1 Each)
Brand: Enerpac Part Number: V-2000
These valves can be plumbed to provide a sequence of clamping functions from just one hydraulic power source. Sequenced locating, clamping, and/or supporting functions can be controlled in a logical order by plumbing one sequence valve to each clamping group requiring a different time interval. The valve can be preset to different pressure values, allowing fluid flow in sequence as the hydraulic pressure increases in the entire system to whatever the power source provides, after all valves are open. These valves are basically timers, not pressure controllers. The VE-211 features a lock nut which secures the hydraulic pressure setting for the secondary circuit and a tamper proof cover can be placed over the set screw. Maximum operating pressure is 5,000 psi. | *$319.00 |
 | Enerpac Hydraulic Power Workholding Hollow Cylinder, No. CY2129-25 (1 Each)
Brand: Enerpac Part Number: CY2129-25
These hollow cylinders combine compactness with power and versatility. Any application requiring either a pushing or pulling action is easily handled with this type of cylinder. The cylinders are threaded and can be placed over a bolt or a stud to upgrade most existing manual clamping fixtures. | *$301.00 |
| Enerpac Hydraulic Power Workholding Jam Nut No. JN-48, 1 5/16-16 (1 Each)
Brand: Enerpac Part Number: FN-331 | *$30.50 |
 | 80016 Hydraulic Maint. (277-MS2-20) Category: Hydraulic Sets
Brand: Enerpac Part Number: 277-MS2-20
Item #: 277-MS2-20. Quickly configure a unique tool to complete your most demanding tasksbrThese sets enable you to push, pull, lift, press, straighten, spread and clamp with forces ranging from 2.5 to 12.5 tons, dependent on model pulliCapacity Wt. = 12 1/2 tons [Max]liCylinder Stroke = 6.250 inliCollapsed Height = 10 3/4 inliOperating Pressure = 5000.0 psi [Max]liIncludes = GA-2 Gauge Adaptor, GP-10S Gauge, RC-256 Cylinder, HC-7206 Hose, P-392 Hand Pump, (8) AttachmentsliQuantity = 13 per setliWt. = 245 lb/ul brCustomers also search for: Discount 80016 Hydraulic Maint., Buy 80016 Hydraulic Maint., Wholesale 80016 Hydraulic Maint., 662005800162, MS2-20, Hydraulic Sets | *$3,019.60 |
 | Enerpac RC-106 10 Ton Single Acting Hydraulic Cylinder
Brand: Enerpac Model: RC-106 Part Number: RC-106
Enerpac is the recognized global market leader in high pressure hydraulics. Manufacturer of hydraulic cylinders, pumps, valves, presses, tools, bolting tools, accessories and system components for the manufacturing and construction industries, for productions, maintenance, operation and repair.brbrCollapsed Height: 9.75"brCylinder Capacity: 10 TonsbrCylinder Effective Area: 2.23 Square InchesbrMaximum Operating Pressure: 10,000 psibrOil Capacity: 13.67 Cubic InchesbrStroke: 6.13"brWeight: 9.8 lbsbr | *$299.00 |
| | 10831 Manual Operated Ch (277-V-66) Category: Hydraulic Tool Parts and Accessories
Brand: Enerpac Part Number: 277-V-66
Item #: 277-V-66. Used for load holding applications with single and double acting cylindersbrValve is manually opened to allow oil to flow back to tank when cylinder retracts pulliOperating Pressure = 10000.0 psi [Max]liInside Type = Check ValveliWt. = 3.90 lb/ul brCustomers also search for: Discount 10831 Manual Operated Ch, Buy 10831 Manual Operated Ch, Wholesale 10831 Manual Operated Ch, 662005108312, V-66, Hydraulic Tool Parts and Accessories | *$296.77 |
 | Enerpac P-142 Two Speed 10,000 psi Light Weight Hydraulic Hand Pump
Brand: Enerpac
Enerpac is the recognized global market leader in high pressure hydraulics. Manufacturer of hydraulic cylinders, pumps, valves, presses, tools, bolting tools, accessories and system components for the manufacturing and construction industries, for productions, maintenance, operation and repair.brbr1st Stage Oil Displacement/Stroke: .221 Cubic Inchesbr1st Stage Pressure Rating: 200 psibr2nd Stage Oil Displacement/Stroke: .055 Cubic Inchesbr2nd Stage Pressure Rating: 10,000 psibrMax Handle Effort: 78 lbsbrUsable Oil Capacity: 20 Cubic Inchesbr | *$289.95 |
 | Enerpac Hydraulic Power Workholding Rest Button No. B3754, 3/8-24 thds., .50 Lg. (1 Each)
Brand: Enerpac Part Number: B375-4 | *$28.00 |
 | Enerpac Hydraulic Power Workholding Clamping Cylinder, Single Action, No. RW-102 (1 Each)
Brand: Enerpac Part Number: RW-102
Used for a wide range of production tooling applications, heavy duty force requirements and high cycle applications. Block shaped clamps provide a high amount of force in a tight area. Designed to be surface mounted on the machine tool bed or on a fixture surface. Provide force in horizontal or vertical direction. Cylindrical clamps have collar threads and base holes for mounting. All have spring return operation for easy unloading of workpiece and faster cycling. Spring is designed to return plunger only. | *$274.00 |
 | Enerpac Hydraulic Power Workholding Threaded Cylinder, Double Acting, No. WMT-39 (1 Each)
Brand: Enerpac Part Number: WMT-39
Cylinders can be fixtured into manual strap or bridge clamp assemblies. Fully threaded bodies allow cylinders to be threaded directly into tapped holes of the fixture for easy installation. Available as single-acting spring return or double acting hydraulic return. The VE-90 can use carbide grippers. | *$273.00 |
 | Enerpac Hydraulic Power Workholding Clamping Cylinder, Single Action, No. RW-55 (1 Each)
Brand: Enerpac Part Number: RW-55
Used for a wide range of production tooling applications, heavy duty force requirements and high cycle applications. Block shaped clamps provide a high amount of force in a tight area. Designed to be surface mounted on the machine tool bed or on a fixture surface. Provide force in horizontal or vertical direction. Cylindrical clamps have collar threads and base holes for mounting. All have spring return operation for easy unloading of workpiece and faster cycling. Spring is designed to return plunger only. | *$250.00 |
 | Enerpac RC-102 10 Ton Single Acting Hydraulic Cylinder
Brand: Enerpac Model: RC-102 Part Number: RC-102
Enerpac is the recognized global market leader in high pressure hydraulics. Manufacturer of hydraulic cylinders, pumps, valves, presses, tools, bolting tools, accessories and system components for the manufacturing and construction industries, for productions, maintenance, operation and repair.brbrCollapsed Height: 4.78"brCylinder Capacity: 10 TonsbrCylinder Effective Area: 2.23 Square InchesbrMaximum Operating Pressure: 10,000 psibrOil Capacity: 4.75 Cubic InchesbrStroke: 2.13"brWeight: 5.1 lbsbr | *$249.00 |
| Enerpac Hydraulic Power Workholding Clamping Cylinder, Single Action, No. RW-53 (1 Each)
Brand: Enerpac Part Number: RW-53
Used for a wide range of production tooling applications, heavy duty force requirements and high cycle applications. Block shaped clamps provide a high amount of force in a tight area. Designed to be surface mounted on the machine tool bed or on a fixture surface. Provide force in horizontal or vertical direction. Cylindrical clamps have collar threads and base holes for mounting. All have spring return operation for easy unloading of workpiece and faster cycling. Spring is designed to return plunger only. | *$236.00 |
 | Enerpac Hydraulic Power Workholding Clamping Cylinder, Single Action, No. RW-50 (1 Each)
Brand: Enerpac Part Number: RW-50
Used for a wide range of production tooling applications, heavy duty force requirements and high cycle applications. Block shaped clamps provide a high amount of force in a tight area. Designed to be surface mounted on the machine tool bed or on a fixture surface. Provide force in horizontal or vertical direction. Cylindrical clamps have collar threads and base holes for mounting. All have spring return operation for easy unloading of workpiece and faster cycling. Spring is designed to return plunger only. | *$209.00 |
 | Enerpac Hydraulic Power Workholding Work Support, Spring Advanced, No. WSL-111 (1 Each)
Brand: Enerpac Part Number: WSL-111
Work supports provide additional support to avoid excessive movement or deflection of the workpiece during machining. When hydraulic pressure is applied to the work support, a piston pushes against an internal adjustable spring that advances the work support plunger against a workpiece at the force set by the adjustable spring. As more hydraulic pressure is applied, an internal sleeve will grip and lock the plunger in that position. Available as a spring or fluid advance unit. The spring advanced unit can be converted to air by simply removing the internal adjustment spring and attaching a low pressure air line to the air breather vent tube. Operating pressure is 700 psi minimum, 5,000 psi maximum. | *$207.00 |
| 80011 Hydraulic Maint (277-MS2-10) Category: Hydraulic Sets
Brand: Enerpac Part Number: 277-MS2-10
Item #: 277-MS2-10. Quickly configure a unique tool to complete your most demanding tasksbrThese sets enable you to push, pull, lift, press, straighten, spread and clamp with forces ranging from 2.5 to 12.5 tons, dependent on model pulliCapacity Wt. = 5 tons [Max]liCylinder Stroke = 6.130 inliCollapsed Height = 9 3/4 inliOperating Pressure = 5000.0 psi [Max]liIncludes = GA-2 Gauge Adaptor, GP-10S Gauge, RC-106 Cylinder, HC-7206 Hose, P-392 Hand Pump, (30) AttachmentsliQuantity = 35 per setliWt. = 185 lb/ul brCustomers also search for: Discount 80011 Hydraulic Maint , Buy 80011 Hydraulic Maint , Wholesale 80011 Hydraulic Maint , 662005800117, MS2-10, Hydraulic Sets | *$2,681.40 |
 | SEPTLS277WMC2000 - Self-Contained Hydraulic Cutters
Brand: Enerpac Part Number: 277-WMC-2000
Self-Contained Hydraulic Cutters | *$2,000.00 |
 | SEPTLS277AH630 - Hydraulic Couplers
Brand: Enerpac Part Number: 277-AH-630
Hydraulic Couplers | *$19.95 |
 | ENERPAC HC-7206 PRESSURE HYDRAULIC HOSES 6'
Brand: Enerpac Model: HC-7206 Part Number: HC-7206
"ENERPAC" HYDRAULIC HOSES
Operating Pressure: 10000.0 psi [Max]
Connections: 3/8 in NPTF x CH-604
Length: 6 ft
Inside Diam: 1/4 in
Material: Thermo-plastic
Wt.: 2.30 lb
4:1 design factor
Two layers of steel wire braids
Outside jacket is polyurethane, to provide maximum abrasion resistance
Exhibits low volumetric expansion under pressure to enhance overall system efficiency | *$182.99 |
 | Enerpac Hydraulic Power Workholding Threaded Cylinder, Single Acting, No. WRT-21 (1 Each)
Brand: Enerpac Part Number: WRT-21
Cylinders can be fixtured into manual strap or bridge clamp assemblies. Fully threaded bodies allow cylinders to be threaded directly into tapped holes of the fixture for easy installation. Available as single-acting spring return or double acting hydraulic return. The VE-90 can use carbide grippers. | *$180.00 |
 | Enerpac Hydraulic Power Workholding Single Acting Manifold Cylinder, No. TS-18251ST (1 Each)
Brand: Enerpac Part Number: CST18251
These threaded miniature cylinders were designed specifically for tooling. All cylinders are single-acting with spring return action for rapid work release. They have threaded bodies for all types of mountings. Cylinders may be inserted directly in a fixture or used with standard brackets. Stainless steel construction. Maximum operating pressure 5,000 psi. See our full line catalog for accessories. | *$140.00 |
| Hydraulic-Equipment - 6' Hose, W/ Ch-604, 3/8" Nptf, .25" I.D.
Brand: Enerpac Model: HC-9206 Part Number: HC-9206
Hydraulic-Equipment - 6' Hose, W/ Ch-604, 3/8" Nptf, .25" I.D. | *$138.99 |
| Enerpac Hydraulic Power Workholding Single Acting Manifold Cylinder, No. TS-18131ST (1 Each)
Brand: Enerpac Part Number: CTS18131
These threaded miniature cylinders were designed specifically for tooling. All cylinders are single-acting with spring return action for rapid work release. They have threaded bodies for all types of mountings. Cylinders may be inserted directly in a fixture or used with standard brackets. Stainless steel construction. Maximum operating pressure 5,000 psi. See our full line catalog for accessories. | *$125.00 |
| Enerpac Hydraulic Power Workholding Single Acting Manifold Cylinder, No. TS-9381ST (1 Each)
Brand: Enerpac Part Number: CST-9381
These threaded miniature cylinders were designed specifically for tooling. All cylinders are single-acting with spring return action for rapid work release. They have threaded bodies for all types of mountings. Cylinders may be inserted directly in a fixture or used with standard brackets. Stainless steel construction. Maximum operating pressure 5,000 psi. See our full line catalog for accessories. | *$125.00 |
| Enerpac HC-9206 20366 6' High Pressure Hoses
Brand: Enerpac Part Number: 277-HC-9206
High pressure hydraulic hoses | *$111.30 |
| Enerpac Hydraulic Power Workholding Single Acting Manifold Cylinder, No. TS-9131ST (1 Each)
Brand: Enerpac Part Number: CST9131
These threaded miniature cylinders were designed specifically for tooling. All cylinders are single-acting with spring return action for rapid work release. They have threaded bodies for all types of mountings. Cylinders may be inserted directly in a fixture or used with standard brackets. Stainless steel construction. Maximum operating pressure 5,000 psi. See our full line catalog for accessories. | *$110.00 |
 | Enerpac HC-9210 20367 10' High Pressure Hydraulic Hose
Brand: Enerpac Part Number: 277-HC-9210
High pressure hydraulic hoses | *$105.95 |
 | SEPTLS277SCH302H - Single-Acting Cylinder/Pump Sets
Brand: Enerpac Part Number: 277-SCH-302H
Single-Acting Cylinder/Pump Sets | *$1,756.06 |
| SEPTLS277SCH202H - Single-Acting Cylinder/Pump Sets
Brand: Enerpac Part Number: 277-SCH-202H
Single-Acting Cylinder/Pump Sets | *$1,477.36 |
