 | Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 3650 Max. PSI, Spline 9-Tooth Shaft, Model# GP-F20-06-S9-C
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.36 cu. in./rev. Max. PSI: 3,650, Shaft Type: Spline 9-tooth, Material: Aluminum, Rotations Per Minute: 3,600, Weight (lbs.): 5.35 | *$175.99 |
| Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 3650 Max. PSI, 5/8in. Shaft, Model# GP-F20-06-P-A
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.36 cu. in./rev. Max. PSI: 3,650, Shaft Diameter (in.): 5/8, Material: Aluminum, Rotations Per Minute: 3,600, Weight (lbs.): 5.35 | *$175.99 |
 | Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 3650 Max. PSI, 3/4in. Shaft, Model# GP-F20-12-P-C
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.73 cu. in./rev. Max. PSI: 3,650, Shaft Diameter (in.): 3/4, Material: Aluminum, Rotations Per Minute: 3,600, Weight (lbs.): 5.91 | *$175.99 |
| Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 3650 Max. PSI, Spline 9-Tooth Shaft, Model# GP-F20-12-S9-A
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.73 cu. in./rev. Max. PSI: 3,650, Shaft Type: Spline 9-tooth, Material: Aluminum, Rotations Per Minute: 3,600, Weight (lbs.): 5.91 | *$175.99 |
 | Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 3650 Max. PSI, Spline 9-Tooth Shaft, Model# GP-F20-04-S9-A
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.24 cu. in./rev. Max. PSI: 3,650, Shaft Type: Spline 9-tooth, Material: Aluminum, Rotations Per Minute: 3,600, Weight (lbs.): 5.20 | *$175.99 |
| Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 3650 Max. PSI, 5/8in. Shaft, Model# GP-F20-12-P-A
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.73 cu. in./rev. Max. PSI: 3,650, Shaft Diameter (in.): 5/8, Material: Aluminum, Rotations Per Minute: 3,600, Weight (lbs.): 5.91 | *$175.99 |
| Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 3650 Max. PSI, 3/4in. Shaft, Model# GP-F20-10-P1-C
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.61 cu. in./rev. Max. PSI: 3,650, Shaft Diameter (in.): 3/4, Material: Aluminum, Rotations Per Minute: 3,600, Weight (lbs.): 5.72 | *$175.99 |
| Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 3650 Max. PSI, Spline 9-Tooth Shaft, Model# GP-F20-12-S9-C
Brand: Dynamic
The Dynamic Fluid Components high-pressure hydraulic gear pump features all-aluminum construction and produces displacement of 0.73 cu. in./rev. Max. PSI: 3,650, Shaft Type: Spline 9-tooth, Material: Aluminum, Rotations Per Minute: 3,600, Weight (lbs.): 5.91 | *$175.99 |
| Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 3650 Max. PSI, 5/8in. Shaft, Model# GP-F20-08-P-C
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.48 cu. in./rev. Max. PSI: 3,650, Shaft Diameter (in.): 5/8, Material: Aluminum, Rotations Per Minute: 3,600, Weight (lbs.): 5.61 | *$175.99 |
| Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 3650 Max. PSI, 3/4in. Shaft, Model# GP-F20-06-P1-C
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.36 cu. in./rev. Max. PSI: 3,650, Shaft Diameter (in.): 3/4, Material: Aluminum, Rotations Per Minute: 3,600, Weight (lbs.): 5.35 | *$175.99 |
| Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 3650 Max. PSI, 5/8in. Shaft, Model# GP-F20-12-P-C
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.73 cu. in./rev. Max. PSI: 3,650, Shaft Diameter (in.): 5/8, Material: Aluminum, Rotations Per Minute: 3,600, Weight (lbs.): 5.91 | *$175.99 |
| Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 3650 Max. PSI, 3/4in. Shaft, Model# GP-F20-08-P1-A
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.48 cu. in./rev. Max. PSI: 3,650, Shaft Diameter (in.): 3/4, Material: Aluminum, Rotations Per Minute: 3,600, Weight (lbs.): 5.61 | *$175.99 |
| Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 3650 Max. PSI, 5/8in. Shaft, Model# GP-F20-04-P-C
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.24 cu. in./rev. Max. PSI: 3,650, Shaft Diameter (in.): 5/8, Material: Aluminum, Rotations Per Minute: 3,600, Weight (lbs.): 5.20 | *$175.99 |
| Dynamic Fluid Components High Pressure Hydraulic Gear Pump - 3650 Max. PSI, 5/8in. Shaft, Model# GP-F20-04-P-A
Brand: Dynamic
The Dynamic Fluid Components high pressure hydraulic gear pump features all aluminum construction and produces displacement of 0.24 cu. in./rev. Max. PSI: 3,650, Shaft Diameter (in.): 5/8, Material: Aluminum, Rotations Per Minute: 3,600, Weight (lbs.): 5.20 | *$175.99 |
 | Dynamic Gear Pump - 1.22 Cu. In., Model# GP-F20-20-P-C
Brand: Dynamic
All-aluminum high-pressure hydraulic gear pump. Max. PSI: 2,900, Shaft Diameter (in.): 5/8, GPM: 15.84, Material: Aluminum, Rotations Per Minute: 3,000, Weight (lbs.): 6.73 | *$119.99 |
| Dynamic Gear Pump - .97 Cu. In., Model# GP-F20-16-P-C
Brand: Dynamic
All-aluminum high-pressure hydraulic gear pump. Max. PSI: 2,900, Shaft Diameter (in.): 5/8, GPM: 12.59, Material: Aluminum, Rotations Per Minute: 3,000, Weight (lbs.): 6.27 | *$109.99 |
 | Elkhart Prod. Corp. 10170010 QTite Coupling With Stop
Brand: Elkhart Part Number: 10170010
Coupling with stop. QTite fittings provide a clean and easy joining method that's designed to save time and money on installations. Installing a joint with QTite is simple, requiring no extra materials beyond the QTite fitting for copper and CPVC tubing installations, a QTite fitting plus a tube liner for PEX (included) installations. No more solder, flux, or special pressing tools needed. The result lowers costs, reduced labor time, and a clean and efficiant process. No. 10170000: 1 2'' No. 10170005: 3 4'' No. 10170010: 1'' | *$7.82 |
 | Elkhart Prod. Corp. 10170030 QTite Reducing Coupling Less Stop
Brand: Elkhart Part Number: 10170030
QTite, 3 4'' x 1 2'' reducing coupling, less stop. QTite fittings provide a clean and easy joining method that's designed to save time and money on installations, installing a joint is simple, requires no extra materials for copper and CPVC tubing installations , and a tube liner for PEX installations, no more solder, flux, heat, or special pressing tools needed. Results in lower costs, reduced labor time, and a clean and efficient installation process. | *$4.96 |
 | Elkhart Prod. Corp. 10170095 QTite Female Adapter
Brand: Elkhart Part Number: 10170095
QTite, Female adapter fittings provide a clean and easy joining method that's designed to save time and money on installations, installing a joint is simple, requires no extra materials for copper and CPVC tubing installations and a tube liner for PEX installations, no more solder, flux, heat, or special pressing tools needed. Results in lower costs, reduced labor time, and clean and efficient installation process. No. 10170090: 1 2'' No. 10170095: 3 4'' | *$4.14 |
 | Elkhart Prod. Corp. 10170125 QTite Male Adapter
Brand: Elkhart Part Number: 10170125
QTite, Male adapter, fittings provide a clean and easy joining method that's designed to save time and money on installations. Installing a joint is simple, requires no extra materials for copper and CPVC tubing installations, and a tube liner for PEX installations, no more solder, flux, heat, or special pressing tools needed. Results in lower costs, reduced labor time, and a clean and efficient installation process. No. 10170120: 1 2'' No. 10170125: 3 4'' | *$4.14 |
| Elkhart Prod. Corp. 10170090 QTite Female Adapter
Brand: Elkhart Part Number: 10170090
QTite, Female adapter fittings provide a clean and easy joining method that's designed to save time and money on installations, installing a joint is simple, requires no extra materials for copper and CPVC tubing installations and a tube liner for PEX installations, no more solder, flux, heat, or special pressing tools needed. Results in lower costs, reduced labor time, and clean and efficient installation process. No. 10170090: 1 2'' No. 10170095: 3 4'' | *$3.29 |
 | Elkhart Prod. Corp. 10170005 QTite Coupling With Stop
Brand: Elkhart Model: 10170005 Part Number: 10170005
Coupling with stop. QTite fittings provide a clean and easy joining method that's designed to save time and money on installations. Installing a joint with QTite is simple, requiring no extra materials beyond the QTite fitting for copper and CPVC tubing installations, a QTite fitting plus a tube liner for PEX (included) installations. No more solder, flux, or special pressing tools needed. The result lowers costs, reduced labor time, and a clean and efficiant process. No. 10170000: 1 2'' No. 10170005: 3 4'' No. 10170010: 1'' | *$3.27 |
| Elkhart Prod. Corp. 10170120 QTite Male Adapter
Brand: Elkhart Part Number: 10170120
QTite, Male adapter, fittings provide a clean and easy joining method that's designed to save time and money on installations. Installing a joint is simple, requires no extra materials for copper and CPVC tubing installations, and a tube liner for PEX installations, no more solder, flux, heat, or special pressing tools needed. Results in lower costs, reduced labor time, and a clean and efficient installation process. No. 10170120: 1 2'' No. 10170125: 3 4'' | *$3.03 |
 | Elkhart 32064 Copper Reducer 3/4" X 1/2" (Pack of 25)
Brand: Elkhart Model: 32064 Part Number: 32064
COPPER REDUCER
Fitting to copper
Bagged
3/4" x 1/2" | *$20.99 |
 | Elkhart Prod. Corp. 10170000 QTite Coupling With Stop
Brand: Elkhart Model: 10170000 Part Number: 10170000
Coupling with stop. QTite fittings provide a clean and easy joining method that's designed to save time and money on installations. Installing a joint with QTite is simple, requiring no extra materials beyond the QTite fitting for copper and CPVC tubing installations, a QTite fitting plus a tube liner for PEX (included) installations. No more solder, flux, or special pressing tools needed. The result lowers costs, reduced labor time, and a clean and efficiant process. No. 10170000: 1 2'' No. 10170005: 3 4'' No. 10170010: 1'' | *$2.86 |
 | Elkhart Products 10155516 Push on Slip Coupling 3/4"
Brand: Elkhart Model: 10155516 Part Number: 10155516
"ELKHART PRODUCTS" PUSH ON SLIP COUPLING
Size: 3/4"
Push on slip coupling.
Includes insert for pex piping.
For tectite fittings, heat free method for joining copper.
A removable reusable fitting system that provides the ultimate flexibility.
Contains less than .025 percent weighted average lead content on wetted surfaces, california vermont low lead compliant. | *$13.24 |
 | Enerpac Hydraulic Power Workholding Swing Cylinder Long Arm No. CAL-202, Use w/cap.=3,900 lbs. (1 Each)
Brand: Enerpac Part Number: CAL-202
These clamp arms are designed for use with the swing cylinders shown above. Clamp arms can be positioned and tightened without removing the swing cylinder from the fixture. Clamp arm design eliminates the use of a vise when securing to a plunger. Short arms have a tapped hole for buttons and toggle pads. Long arms can be shortened to desired length. | *$97.00 |
 | Enerpac HC-7206 6' High Pressure Hoses
Brand: Enerpac Part Number: 277-HC-7206
High pressure hydraulic hoses | *$95.95 |
 | Enerpac Hydraulic Power Workholding Single Acting Manifold Cylinder, No. TS-2131ST (1 Each)
Brand: Enerpac Part Number: CST-2131
These threaded miniature cylinders were designed specifically for tooling. All cylinders are single-acting with spring return action for rapid work release. They have threaded bodies for all types of mountings. Cylinders may be inserted directly in a fixture or used with standard brackets. Stainless steel construction. Maximum operating pressure 5,000 psi. See our full line catalog for accessories. | *$95.00 |
 | Enerpac Hydraulic Power Workholding Single Acting Manifold Cylinder, No. TS-9191ST (1 Each)
Brand: Enerpac Part Number: TS-9191ST
These threaded miniature cylinders were designed specifically for tooling. All cylinders are single-acting with spring return action for rapid work release. They have threaded bodies for all types of mountings. Cylinders may be inserted directly in a fixture or used with standard brackets. Stainless steel construction. Maximum operating pressure 5,000 psi. See our full line catalog for accessories. | *$92.00 |
 | 80353 Handpump w/5t 5" C (277-SCR-55H) Category: Hydraulic Sets
Brand: Enerpac Part Number: 277-SCR-55H
Item #: 277-SCR-55H. Optimum match of individual componentsbrAll hand pumps are two-speed pulliCapacity Wt. = 5 tons [Max]liCylinder Stroke = 5.000 inliCollapsed Height = 8 1/2 inliOperating Pressure = 10000.0 psi [Max]liIncludes = RC-55 Cylinder, P-142 Hand Pump, HC-7206 Hose, GP-10S Gauge, GA-4 Gauge AdaptorliQuantity = 5 per setliWt. = 16.80 lb/ul brCustomers also search for: Discount 80353 Handpump w/5t 5" C, Buy 80353 Handpump w/5t 5" C, Wholesale 80353 Handpump w/5t 5" C, 662005803538, SCR-55H, Hydraulic Sets | *$876.46 |
| Enerpac Hydraulic Power Workholding Swing Cylinder Long Arm No. CAL-122, Use w/cap.=2,600 lbs. (1 Each)
Brand: Enerpac Part Number: CAL-122
These clamp arms are designed for use with the swing cylinders shown above. Clamp arms can be positioned and tightened without removing the swing cylinder from the fixture. Clamp arm design eliminates the use of a vise when securing to a plunger. Short arms have a tapped hole for buttons and toggle pads. Long arms can be shortened to desired length. | *$83.00 |
| Enerpac Hydraulic Power Workholding Single Acting Manifold Cylinder, No. TS-971ST (1 Each)
Brand: Enerpac Part Number: TS-971ST
These threaded miniature cylinders were designed specifically for tooling. All cylinders are single-acting with spring return action for rapid work release. They have threaded bodies for all types of mountings. Cylinders may be inserted directly in a fixture or used with standard brackets. Stainless steel construction. Maximum operating pressure 5,000 psi. See our full line catalog for accessories. | *$83.00 |
| Enerpac Hydraulic Power Workholding Single Acting Manifold Cylinder, No. TS-271ST (1 Each)
Brand: Enerpac Part Number: TS-271ST
These threaded miniature cylinders were designed specifically for tooling. All cylinders are single-acting with spring return action for rapid work release. They have threaded bodies for all types of mountings. Cylinders may be inserted directly in a fixture or used with standard brackets. Stainless steel construction. Maximum operating pressure 5,000 psi. See our full line catalog for accessories. | *$75.00 |
 | SEPTLS277HP2015 - Heat Treated Hollow Saddles
Brand: Enerpac Part Number: 277-HP-2015
Heat Treated Hollow Saddles | *$73.88 |
 | Enerpac Hydraulic Power Workholding Turbo Air/Hydraulic Pump No. PACG-3002SB (1 Each)
Brand: Enerpac Part Number: PACG-3002SB
A turbo air pump is recommended where input air pressure is limited. Engineered to recycle exhaust air to help power the pump. Maintains a tight pressure range for reliable clamping performance. Pump will automatically restart in the event of a pressure drop in the hydraulic system. Mounting plate allows for horizontal or vertical machine-side mounting. Buna-N polyurethane and Teflon seals. | *$712.00 |
 | Enerpac Hydraulic Power Workholding Swing Cylinder w/Arm No. SC-1, M=1 7/8-16 (1 Each)
Brand: Enerpac Part Number: SC-1
These swing cylinders rotate 90 degrees as they begin their stroke, continuing without rotation for the final clamping stroke. Cylinders can be changed to left swing, right swing, or pull applications by loosening the side plug and then rotating the plunger to a desired position. The VE-354 and VE-352 have a retract spring for single-acting operations. The VE-360 is only for double-acting operation and has no return spring. Clamp arm provided. Can be mounted with the built-in flange by securing the swinger to the top or bottom of a tooling plate or by screwing the threaded body into a mounting bracket. | *$687.00 |
 | Enerpac RCS-502 50 Ton Single Acting Low Height Hydraulic Cylinder
Brand: Enerpac
Enerpac is the recognized global market leader in high pressure hydraulics. Manufacturer of hydraulic cylinders, pumps, valves, presses, tools, bolting tools, accessories and system components for the manufacturing and construction industries, for productions, maintenance, operation and repair.brbrCollapsed Height: 4.81"brCylinder Capacity: 50 TonsbrCylinder Effective Area: 9.63 Square InchesbrMaximum Operating Pressure: 10,000 psibrOil Capacity: 22.91 Cubic InchesbrStroke: 2.38"brWeight: 24 lbsbr | *$685.00 |
| Enerpac RCS-201 20 Ton Single Acting Low Height Hydraulic Cylinder
Brand: Enerpac Model: RCS-201 Part Number: RCS-201
Enerpac is the recognized global market leader in high pressure hydraulics. Manufacturer of hydraulic cylinders, pumps, valves, presses, tools, bolting tools, accessories and system components for the manufacturing and construction industries, for productions, maintenance, operation and repair.brbrCollapsed Height: 3.88"brCylinder Capacity: 20 TonsbrCylinder Effective Area: 4.44 Square InchesbrMaximum Operating Pressure: 10,000 psibrOil Capacity: 7.77 Cubic InchesbrStroke: 1.75"brWeight: 11 lbsbr | *$669.99 |
 | Hydraulic-Equipment - Pump, Hand, 2-Speed
Brand: Enerpac Part Number: P-80
Hydraulic-Equipment - Pump, Hand, 2-Speed | *$650.15 |
| Enerpac Hydraulic Power Workholding Turbo Air/Hydraulic Pump No. PACG-5002SB (1 Each)
Brand: Enerpac Part Number: PACG5002SB
A turbo air pump is recommended where input air pressure is limited. Engineered to recycle exhaust air to help power the pump. Maintains a tight pressure range for reliable clamping performance. Pump will automatically restart in the event of a pressure drop in the hydraulic system. Mounting plate allows for horizontal or vertical machine-side mounting. Buna-N polyurethane and Teflon seals. | *$646.00 |
| Enerpac Hydraulic Power Workholding Swing Cylinder Long Arm No. CAL-52, Use w/cap.=1,250 lbs. (1 Each)
Brand: Enerpac Part Number: CAL-52
These clamp arms are designed for use with the swing cylinders shown above. Clamp arms can be positioned and tightened without removing the swing cylinder from the fixture. Clamp arm design eliminates the use of a vise when securing to a plunger. Short arms have a tapped hole for buttons and toggle pads. Long arms can be shortened to desired length. | *$63.00 |
 | Enerpac Hydraulic Power Workholding Low Profile Swing Clamp No. ASC-30, Clamp force=1,375 lbs. (1 Each)
Brand: Enerpac Part Number: ASC-30
These low profile swing clamps are designed to swing 97degrees to position the arm over the work piece. A vertical plunger then exerts an upward thrust on the back end of the swing arm providing powerful downward pressure to clamp the work piece. Arm can swing right or left. Operating pressure is 1,200 to 2,500 psi. | *$602.00 |
 | Enerpac H-9206 6' High Pressure Hose 3/8" NPT On Both End .25" ID
Brand: Enerpac Part Number: 277-H-9206
High pressure hydraulic hoses | *$59.95 |
 | Enerpac RC-256 25 Ton Single Acting Hydraulic Cylinder
Brand: Enerpac Model: RC-256 Part Number: RC-256
Enerpac is the recognized global market leader in high pressure hydraulics. Manufacturer of hydraulic cylinders, pumps, valves, presses, tools, bolting tools, accessories and system components for the manufacturing and construction industries, for productions, maintenance, operation and repair.brbrCollapsed Height: 10.75"brCylinder Capacity: 25 TonsbrCylinder Effective Area: 5.15 Square InchesbrMaximum Operating Pressure: 10,000 psibrOil Capacity: 32.19 Cubic InchesbrStroke: 6.25"brWeight: 22 lbsbr | *$568.90 |
 | Enerpac Hydraulic Power Workholding Hollow Cylinder, No. RWH-121 (1 Each)
Brand: Enerpac Part Number: RWH-121
These hollow cylinders combine compactness with power and versatility. Any application requiring either a pushing or pulling action is easily handled with this type of cylinder. The cylinders are threaded and can be placed over a bolt or a stud to upgrade most existing manual clamping fixtures. | *$551.00 |
 | Enerpac Hydraulic Power Workholding Swing Cylinder Short Arm No. CAS-121, Use w/cap.=2,600 lbs. (1 Each)
Brand: Enerpac Part Number: CAS-121
These clamp arms are designed for use with the swing cylinders shown above. Clamp arms can be positioned and tightened without removing the swing cylinder from the fixture. Clamp arm design eliminates the use of a vise when securing to a plunger. Short arms have a tapped hole for buttons and toggle pads. Long arms can be shortened to desired length. | *$53.00 |
| Enerpac Hydraulic Power Workholding Swing Cylinder Long Arm No. CAL-22, Use w/cap.=500 lbs. (1 Each)
Brand: Enerpac Part Number: CAL-22
These clamp arms are designed for use with the swing cylinders shown above. Clamp arms can be positioned and tightened without removing the swing cylinder from the fixture. Clamp arm design eliminates the use of a vise when securing to a plunger. Short arms have a tapped hole for buttons and toggle pads. Long arms can be shortened to desired length. | *$52.00 |
 | Enerpac Hydraulic Power Workholding Swing Cylinder Short Arm No. CAS-51, Use w/cap.=1,250 lbs. (1 Each)
Brand: Enerpac Part Number: CAS-51
These clamp arms are designed for use with the swing cylinders shown above. Clamp arms can be positioned and tightened without removing the swing cylinder from the fixture. Clamp arm design eliminates the use of a vise when securing to a plunger. Short arms have a tapped hole for buttons and toggle pads. Long arms can be shortened to desired length. | *$44.00 |
 | Enerpac Hydraulic Power Workholding No. SURS51, Light Duty, Single Acting, Upper Flange, w/o Arm (1 Each)
Brand: Enerpac Part Number: SURS-51
These swing cylinders rotate 90 degrees as they begin their stroke, continuing without rotation for the final clamping stroke. Cylinders can be changed to left swing, right swing or pull applications by loosening the bottom plug. All single acting cylinders come with a retract spring for single-acting operations. Max. psi 5,000. Clamp arms not included but sold separately below. Body styles available are threaded with upper flange or non-threaded with lower or upper flange. | *$430.00 |
|
