 | Brand Hydraulics Electronically Adjustable Flow Control Valve - 0-55 GPM, 3000 PSI, Model# PLEFC165512LM
Brand: Brand Hydraulics
Brand Hydraulics proportional pressure-compensated valve electronically adjusts flow to a hydraulic actuator. Nominally rated at 3000 PSI. U.S.A. | *$699.99 |
 | Brand Hydraulics Side-Ported Adjustable Flow Control Valve - 1/2in. NPT ports, 0-16 GPM, Model# PFC51-1/2
Brand: Brand Hydraulics
Brand Hydraulics side-ported adjustable flow control valve will start or stop a hydraulic cylinder or motor and vary speed over wide range. Once set, maintains constant speed regardless of load variation. Excess flow is returned to tank or used to power another function. U.S.A. | *$69.99 |
 | Brand Hydraulics Electronically Adjustable Flow Control Valve - 0-30 GPM, 3000 PSI, Model# PEFC12-30-12
Brand: Brand Hydraulics
Proportional pressure-compensated valve electronically adjusts flow to a hydraulic actuator. Nominally rated at 3000 PSI. U.S.A. | *$269.99 |
 | Brand Hydraulics Electronically Adjustable Flow Control Valve - 0-20 GPM, 3000 PSI, Model# PEFC12-20-12
Brand: Brand Hydraulics
Proportional pressure-compensated valve electronically adjusts flow to a hydraulic actuator. Nominally rated at 3000 PSI. U.S.A. | *$269.99 |
 | Brand Hydraulics 12 VDC Electronic Control Box, Model# EC-12-01
Brand: Brand Hydraulics
Proportionally controls electronic flow control valve. Main control knob adjusts current going through the valve coil. Good for outdoor use. U.S.A. | *$229.99 |
 | Brand Hydraulics 12 VDC Electronic Panel Mount Controller, Model# EC-12-02
Brand: Brand Hydraulics
Brand Hydraulics 12 VDC Electronic Panel Mount Controller proportionally controls electronic flow control valve. Main control knob adjusts current going through the valve coil. Ideal for in-plant or in-cab applications. U.S.A. | *$229.99 |
 | Brand Hydraulics Monoblock Loader Valve, Model# PLV22TSTKAB
Brand: Brand Hydraulics
The Brand Hydraulics monoblock loader valve is a 2-spool loader valve rated for 10 GPM and 4500 PSI, with adjustable relief preset at 2000 PSI. Spool actions are spring-centering and 4th position float. Tandem center spools with joystick handle. U.S.A. Max. Flow (GPM): 10, Inlet Port (in.): 8 SAE, Outlet Port (in.): 8 SAE, Max. PSI: 4,500, Spool (qty.): 2 | *$199.99 |
| Brand Hydraulics Monoblock Loader Valve with Regeneration, Model# PLV22RFSTKAB
Brand: Brand Hydraulics
The Brand Hydraulics monoblock loader valve with regeneration is a 2-spool loader valve rated for 10 GPM and 4500 PSI, with adjustable relief preset at 2000 PSI. Spool actions are regeneration with spring-centering and 4th position float. Tandem center spools with joystick handle. U.S.A. Max. Flow (GPM): 10, Inlet Port (in.): 8 SAE, Outlet Port (in.): 8 SAE, Max. PSI: 4,500, Spool (qty.): 2 | *$199.99 |
 | Brush Research (BRMGBD3-3/4) 3-3/4in. 180 Grit Flex Engine Cylinder Hone
Brand: Brush Research Part Number: BRMGBD3-3/4
pbFeatures and Benefits:/b/p pFor any type and size of cylinder, the FLEX-HONE process (Superfinishing) produces a controlled surface condition unobtainable by any other method. It involves finish, geometry and metallurgical structure. A high percentage plateau free of cut, torn and folded metal (with radiused ports).br br A resilient, flexible, honing tool with a soft cutting action. The abrasive (points) globules each have independent suspension that assures the Flex-Hone to be self-centering, self-centering to the bore, and self-compensating for wear. Specifically, it is a low-temperature abrading process that exposes the undisturbed base metal structure to produce a longwearing surface. It is a method of developing a surface on a metal part which is optically smooth and metallurgically free of any fragmented, amorphous or smeared metal from previous operations. It is accomplished at a low pressure where the "stones" float. See and read the various booklets of actual tests covering almost every situation that will ensure a superior performance in situations depending on surface finish. The particular type of Flex-Hone crosshatch is extremely efficient in providing a multiplicity of oil grooves or valleys for oil retention as opposed to the often unidirectional or uneven valleys common to the conventional type rigid hone. A crosshatch that usually remains as the cylinder wall has been wear-reduced by the Flex-Hone./p | *$63.15 |
 | Brush Research (BRMGBD3) 3in. 180 Grit Flex Engine Cylinder Hone
Brand: Brush Research Part Number: BRMGBD3
WE CANNOT SHIP THIS ITEM TO APO ADDRESSES. | *$46.98 |
 | BSM PUMP 713-4-7 "B-SERIES" PEDESTAL MOUNT GEAR PUMP
Brand: BSM PUMP Model: 713-4-7 Part Number: 713-4-7
"BSM PUMP" PEDESTAL MOUNT GEAR PUMP
BSM 'B' and 'S' series pumps are a good choice for a variety of recirculating, mixing, transfer, hydraulic, and metering applications. These pumps are available pedestal or flange mounted, with integral relief valve, and constructed of cast iron, ductile iron, or bronze. Seal options include compression packing, lip seal, and mechanical seal. Standard pumps will operate at 200 psi and 250 deg. F. Typical liquids pumped include various oils, machine tool coolant, solvents, resins, paints, varnishes, and many other liquids.
Highlights:
Speed 900 rpm [Max]
Displacement 0.02980 Gal/Cycle
Slip gpm/psi 0.00800
0 PSI Flow / Power 26.8 gal/min @ 0.50 hp
50 PSI Flow / Power 26.4 gal/min @ 1.30 hp
100 PSI Flow / Power 26.0 gal/min @ 2.30 hp
Rotation CW or CCW
Port Size 1 1/4 in
Shaft Diam 0.75 in
Shaft Height 3.88 in
Height 5.810 in
Width 4.440 in
Length 9.880 in
Gear Type Helical
Gear Material Steel
Housing Material Iron
Mounting Pedestal
Type With Relief Valve | *$779.99 |
 | BSM PUMP 713-9001-24 EXTERNAL RELIEF VALVE 1"
Brand: BSM PUMP Model: 713-9001-24 Part Number: 713-9001-24
"BSM PUMP" EXTERNAL RELIEF VALVE
The 1/4" to 3/4" relief valves are suitable for pressure settings up to 100 psi
The 1" relief valve is suitable for pressure settings up to 200 psi
Higher pressure settings are possible by changing the spring
Contact the factory for assistance
Flow 27.0 gal/min
Inlet Size 1 in
Inlet Type Female Thread
Operating Pressure 200.0 psi [Max]
Outlet Size 1 in
Outlet Type Female Thread
Type External Relief Valve | *$399.75 |
 | BSM PUMP 713-9020-280 ROTARY GEAR PUMP REPAIR KIT
Brand: BSM PUMP Model: 713-9020-280 Part Number: 713-9020-280
"BSM PUMP" REPAIR KIT
For Model 2S
Includes (1) Housing, (1) gear set, (4) bearings, (1) mechanical seal or (1) set of compression packing
Type Repair Kit | *$350.90 |
 | BSM PUMP 713-9003-13 ROTARY GEAR PUMP STRAINER 3/4"
Brand: BSM PUMP Model: 713-9003-13 Part Number: 713-9003-13
"BSM PUMP" ROTARY GEAR PUMP STRAINER
Length 7 1/8 in
Width 4 5/8 in
Height 3 1/8 in
Thread Size 3/4 in (NPT)
Type Strainer | *$152.55 |
| BSM PUMP 713-9001-23 EXTERNAL RELIEF VALVE 3/4"
Brand: BSM PUMP Model: 713-9001-23 Part Number: 713-9001-23
"BSM PUMP" EXTERNAL RELIEF VALVE
The 1/4" to 3/4" relief valves are suitable for pressure settings up to 100 psi
The 1" relief valve is suitable for pressure settings up to 200 psi
Higher pressure settings are possible by changing the spring
Contact the factory for assistance
Flow 17.0 gal/min
Inlet Size 3/4 in (NPT)
Inlet Type Female Thread
Operating Pressure 100.0 psi [Max]
Outlet Size 3/4 in (NPT)
Outlet Type Female Thread
Type External Relief Valve | *$139.99 |
 | BSM PUMP 713-9030-270 ROTARY GEAR PUMP MECHANICAL SEAL
Brand: BSM PUMP Model: 713-9030-270 Part Number: 713-9030-270
"BSM PUMP" MECHANICAL SEAL
For Model 3, 4, 3S, 4S, 5S
Type Mechanical Seal | *$135.35 |
| BSM PUMP 713-9020-270 ROTARY GEAR PUMP MECHANICAL SEAL
Brand: BSM PUMP Model: 713-9020-270 Part Number: 713-9020-270
"BSM PUMP" MECHANICAL SEAL
For Model 2, 2S
Type Mechanical Seal | *$125.99 |
 | Buyers Flush-Face Coupler - 1/2in. Female; 3/4in. Port NPT, Model# FF0812
Brand: Buyers
Push-to-connect design, no need to retract the sleeve to connect. Locking sleeve prevents accidental disconnection during operation. Fitting Size (in.): 1/2 F x 3/4 NPT, Max. PSI: 5,000, Locking Sleeve: Yes | *$69.99 |
| Buyers Flush-Face Coupler - 1/2in. Female; 1/2in. Port NPT, Model# FF0808
Brand: Buyers
Push-to-connect design, no need to retract the sleeve to connect. Locking sleeve prevents accidental disconnection during operation. | *$69.99 |
 | Buyers Dust Cap For Male Plug - 1/2in., Model# FF08MC
Brand: Buyers
A push-on toilet seat style dust protector helps keep contaminants from entering the hydraulic system. | *$6.99 |
 | Buyers Dust Cap For Female Coupler - 1/2in., Model# FF08FC
Brand: Buyers
A push-on toilet seat style dust protector helps keep contaminants from entering the hydraulic system. | *$6.99 |
 | Buyers Breather Cap
Brand: Buyers | *$6.99 |
| Buyers Flush-Face Coupler - 1/2in. Female; 1 1/16-12 UNF Port NPT, Model# FF08S12
Brand: Buyers
Push-to-connect design, no need to retract the sleeve to connect. Locking sleeve prevents accidental disconnection during operation. | *$59.99 |
 | Buyers Console for Item# 905321, Model# HVC1
Brand: Buyers
Console only for hydraulic spreader valve, Item# 905321. Easy installation. U.S.A. | *$54.99 |
 | Buyers Bolt Kit for Hydraulic Pump Mounting Bracket
Brand: Buyers
Use these to mount pump, engine and bracket. Bolts and lock-washers are included. To select the correct kit, match your bracket, engine and pump type. | *$5.99 |
 | Buyers Flush-Face Plug - 5/8in. Male; 7/8-14 UNF Port NPT, Model# FM10S78
Brand: Buyers
Push-to-connect design, no need to retract the sleeve to connect. Locking sleeve prevents accidental disconnection during operation. | *$49.99 |
| Buyers Flush-Face Plug - 5/8in. Male; 3/4in. Port NPT, Model# FM1012
Brand: Buyers
Push-to-connect design, no need to retract the sleeve to connect. Locking sleeve prevents accidental disconnection during operation. | *$44.99 |
| Buyers Dust Cap For Female Coupler - 3/8in., Model# FF06FC
Brand: Buyers
A push-on toilet seat style dust protector helps keep contaminants from entering the hydraulic system. | *$4.99 |
 | Buyers Flow Control Valve-1/2in.
Brand: Buyers
Precision flow control and full shutoff in one flow direction, unrestricted flow in opposite direction. Ideal for control of flow to hydraulic motors as a means of controlling motor speed. 3000 PSI, steel construction. | *$39.99 |
 | Buyers Hydraulic Oil Suction Strainer
Brand: Buyers
Suction line filter assembly with 3/4in. NPT ports with bypass for cold start protection. Includes 149 micron stainless steel mesh element. This filter may be used where it is not possible to use an in-tank suction strainer. Not for use with pumps larger than 15 GPM. | *$39.99 |
| Buyers Flush-Face Coupler - 3/8in. Female; 1/2in. Port NPT, Model# FF0608
Brand: Buyers
Push-to-connect design, no need to retract the sleeve to connect. Locking sleeve prevents accidental disconnection during operation. | *$39.99 |
| Buyers Flush-Face Plug - 1/2in. Male; 3/4in. Port NPT, Model# FM0812
Brand: Buyers
Push-to-connect design, no need to retract the sleeve to connect. Locking sleeve prevents accidental disconnection during operation. | *$39.99 |
 | Bolt Kit for Hydraulic Pump Mounting Bracket
Brand: Buyers
Use these to mount pump, engine and bracket. Bolts and lock-washers are included. To select the correct kit, match your bracket, engine and pump type. | *$3.99 |
 | Buyers Large Filter - 35 GPM Capacity
Brand: Buyers
Return line filter assembly with 1-1/4in. NPT ports with bypass. Includes 10 micron filter. Assembly is 5in. diameter x 7in. long. Use with our 22 GPM two-stage pump. Max. Flow (GPM): 35, Outlet Port (in.): 1 1/4 NPT, Filter Included: Yes | *$29.99 |
| Buyers Flow Control Valve-1/4in.
Brand: Buyers
Precision flow control and full shutoff in one flow direction, unrestricted flow in opposite direction. Ideal for control of flow to hydraulic motors as a means of controlling motor speed. 3000 PSI, steel construction. | *$24.99 |
 | Metro Machine Check Valve, 1/2in. Port Size, 3000 PSI
Brand: Buyers
Will hold pressure in one direction and free flow in other. One end male pipe thread, other end female pipe thread. Free flow direction, male port to female port. Max pressure 3000 PSI. Port Size (in.): 1/2, Max. PSI: 3,000 | *$19.99 |
 | Buyers Return Line Filter - 20 GPM Capacity
Brand: Buyers
Return line filter assembly with 3/4in. NPT ports with bypass for cold start protection. Includes 10 micron filter for optimum system cleanliness. This filter is typically located in the return line to the reservoir. Recommended for use with Suction Strainer 4010 or 4011. Fits systems with 2 to 25 GPM pumps. | *$19.99 |
 | Buyers Fluid Level Gauge With Thermometer
Brand: Buyers
Fluid level gauge mounts on side wall of reservoirs up to in. wall thickness. Metal cover protects gauge from damage. Includes thermometer. Mounts with hollow in.-13 bolts on 5in. centers. 6.5in.H x 1.5in.W x 2.2in.D. | *$16.99 |
 | Buyers Return Line Filter - 20 GPM Capacity
Brand: Buyers
Extra Elements for Filter #4020. | *$14.99 |
| Buyers Flow Control Valve-3/4in.
Brand: Buyers Products
Precision flow control and full shutoff in one flow direction, unrestricted flow in opposite direction. Ideal for control of flow to hydraulic motors as a means of controlling motor speed. 3000 PSI, steel construction. Port Size (in.): 3/4, Max. Flow (GPM): 25, Max. PSI: 3,000 | *$69.99 |
 | Bolt Kit for Hydraulic Pump Mounting Bracket
Brand: Buyers Products
Use these to mount pump, engine and bracket. Bolts and lock-washers are included. To select the correct kit, match your bracket, engine and pump type. | *$3.99 |
| Buyers Flow Control Valve-3/8in.
Brand: Buyers Products
Precision flow control and full shutoff in one flow direction, unrestricted flow in opposite direction. Ideal for control of flow to hydraulic motors as a means of controlling motor speed. 5000 PSI, steel construction. Port Size (in.): 3/8, Max. Flow (GPM): 8, Max. PSI: 5,000 | *$29.99 |
 | Campbell TFP 51-LF Tank Fitting Package Ll
Brand: Campbell Model: TFP 51-LF Part Number: TFP 51-LF
"CAMPBELL" WELL SYSTEM PRESSURE TANK FITTING
* Package contains: one lead free tank tee 1" x 3/4" one square D switch, one lead free 1/4" x 3" nipple, one lead free G1T-LF 0-100 PSI gauge, one drain valve and one lead free 1/2" relief valve
* This product contains less than 0.25% weighted average lead content on wetted surfaces | *$79.99 |
 | CAMPBELL PGCBM-1-NL PRESSURE GAUGE 0-100 PSI LF
Brand: Campbell Model: PGCBM-1-NL Part Number: PGCBM-1-NL
"CAMPBELL" PRESSURE GAUGE
* 2" face
* 0-200 PSI gauge
* Polycarbonate lens
* Center back mount (1/4")
* This product contains less than 0.25% weighted average lead content on wetted surfaces | *$3.75 |
 | Campbell PG2-NL Pressure Gauge 0-200 Lf
Brand: Campbell Model: PG2-NL Part Number: PG2-NL
"CAMPBELL" PRESSURE GAUGE
*2" face
*0-200 PSI gauge
*Polycarbonate lens
*This product contains less
than 0.25% weighted average
lead content on wetted
surfaces | *$3.75 |
 | Cash Acme 2008-0000 Shark Bite SharkBite Check Valve, 1/2-by-1/2-Inch (Not CA/VT Compliant)
Brand: Cash Acme Model: 2008-0000 Part Number: U2008A
General purpose spring check valve that prevents the reverse flow of water. Can be installed horizontally and vertically and can be connected in seconds to copper tubing, CTS, CPVC, and Pex. Instant push-fit connections for increase ease of use - no solde ring, clamps, unions, or glue required. Maximum Pressure: 200 PSI. Maximum Temperature: 150 degrees F (65 degrees C) (water). | *$9.37 |
 | Cash Acme 15836A-0150 Shark Bite Temperature and Pressure Relief Valves, 3/4-Inch 150 PSI (Not CA/VT Compliant)
Brand: Cash Acme Model: 15836A-0150 Part Number: 15836A-0150
Cash Acme 15836A-0150 3/4" 150 PSI Temperature Pressure Relief Valves Cash Acme 15836A-0150 3/4" 150 PSI Temperature Pressure Relief Valves Features:;Intended for protection of hot water heaters and storage tanks;Incorporates an inert thermal element coating that provides effective isolation from mineral deposits, liming, and galvanic corrosion;Cast bronze body with male inlet and female outlet, brass and stainless steel internal parts, silicone seat disc and stainless steel spring;Test lever standard;Factory-set relief settings;210;F temperature relief setting;5" element extensions;150 PSI;3/4";Carded;CA/VT Compliant | *$7.95 |
 | SHARKBITE BALL VALVE 1"
Brand: CASH ACME Model: 22223-0000 Part Number: 22223-0000
"SHARKBITE" BALL VALVE
*1" cash acme ball valve
with 1" Sharkbite fittings
*Ball valve rated to 600 PSI,
WOG 200 deg. F temperature
*1" demount clip included
*Ball valve listed by CSA, FM,
NSF and UL
*Boxed | *$39.99 |
 | Cash Acme 22185 Shark Bite Push-Fittings Ball Valve, 3/4-Inch (Not CA/VT Compliant)
Brand: Cash Acme Model: 22185 Part Number: 22185
Cash Acme 22185 3/4" Push-Fittings Ball Valve Cash Acme 22185 3/4" Push-Fittings Ball Valve Features:;Cash Acme's full port ball valve now comes with SharkBite connections for easy installation;The body is composed of highly forged brass, and features a single lever control;Easy, quick push-fit installation using CTS copper, PEX, and CPVC;3/4";CA/VT Compliant | *$11.72 |
 | Hydraulic Knockout Punch Driver Kit
Brand: Central Hydraulics
Great for punching holes in steel, this punch driver features a hydraulic design that punches much faster than manual wrench-style punches. Kit includes a 10 ton pump and five of the most popular punches and dies. Pair with the 2-1/2" or 3" Knockout Punch And Die Sets (sold separately) to increase the tool's capacity.
Punch holes up to 2" diameter in 11 gauge mild and 16 gauge stainless steel
Compact design is easily portable to any job site
Quick and easy to use
Includes 10 ton pump with pressure hose, five punches and dies, 3/4" and 3/8" threaded studs, an adapter, and a carrying case. Die sizes (actual hole size x pipe diameter): 1.115" x 3/4"; 1.362" x 1"; 1-11/16" x 1-1/4 "; 1-15/16" x 1-1/2"; 2-3/8" x 2" | *$117.90 |
