 | 3/4 NPT Ports, 1. NPT Inlet, 4 Port, 2.25 W x 12.00 Lg., Aluminum Single Sided Port Manifolds (1 Each)
Brand: Reid Supply Company Part Number: MM-260
Single Sided Ports - Provides a convenient junction point for branching off a single line on distribution systems. Can be used on air, hydraulic, water, coolant, machine and other distribution lines. Made of 6061 aluminum with black anodized finish unless noted below. Eight drilled mounting holes (two per side). Operating pressure: 1,000 psi air and, 5,000 psi non-shock hydraulic. All threads are NPT. Other lengths, threads and number of holes as well as custom sizes and configurations are available as special order. Please call for price and delivery for sizes not listed below. | *$62.39 |
 | 2. Bore x 2. Stroke, Double Acting, Universal Mount, Clippard Stainless Steel Pneumatic Cylinders (1 Each)
Brand: Reid Supply Company Part Number: PAC-315
2" Bore Universal Mount Double Acting | *$62.04 |
 | 3/4 NPT, Parker Regulators w/Gauge (1 Each)
Brand: Reid Supply Company Part Number: MFP-367
Regulators with Gauge - These regulators are designed to provide quick response and accurate pressure regulation for the most demanding industrial applications. Rolling diaphragm design gives repeatable performance with low hysteresis over a wide range of pressures. Pressure range is 2-125 psi and temperature range is 32°F to 125°F. | *$61.99 |
| 1/2 NPT, Parker Regulators w/Gauge (1 Each)
Brand: Reid Supply Company Part Number: MFP-366
Regulators with Gauge - These regulators are designed to provide quick response and accurate pressure regulation for the most demanding industrial applications. Rolling diaphragm design gives repeatable performance with low hysteresis over a wide range of pressures. Pressure range is 2-125 psi and temperature range is 32°F to 125°F. | *$61.99 |
| 3/8 NPT, Parker Regulators w/Gauge (1 Each)
Brand: Reid Supply Company Part Number: MFP-365
Regulators with Gauge - These regulators are designed to provide quick response and accurate pressure regulation for the most demanding industrial applications. Rolling diaphragm design gives repeatable performance with low hysteresis over a wide range of pressures. Pressure range is 2-125 psi and temperature range is 32°F to 125°F. | *$61.80 |
 | 3/4 Bore x 1. Stroke, Double Acting - Low Profile, Parker Air Cylinders (1 Each)
Brand: Reid Supply Company Part Number: MFP-230
Low Profile - Parker low profile cylinders are designed to meet the demands for saving space. The cylinder body is made of heavy wall aluminum alloy. The tube ID coating has extreme hardness, excellent wear, seizure resistance, low coefficient of friction and high corrosion resistance. The piston rod is made of high strength steel, hard chrome plated for smooth performance, and extended seal wear. The piston seal and the piston rod seal are made of Buna-N material for positive sealing. Maximum operating pressure 250 psi with an operating temperature range of -10°F to 165°F. Other sizes are available as special order. Please call for price and delivery. | *$61.69 |
 | 1/4 NPT Ports, 1. Inlet, 8 Port, 1.75 Hex. x 11. Lg., Aluminum Manifolds, Black (1 Each)
Brand: Reid Supply Company Part Number: NM-221
Aluminum - Ready to use, no threading required. Positive seal. Use with brass or steel fittings. Hardcoat color anodized finish available in black, blue, or red. Other sizes, hole configurations and colors available as special orders. Please call for price and delivery. Automotive tested approval. Tensile 38,000 psi, yield 35,000 psi. Hardened to T6511. Can withstand pH 4.5. Honed ID. Dipped to remove blemishes and chips. Brackets are sold separately. | *$61.21 |
 | 3/8 NPT, Parker Lubricators (1 Each)
Brand: Reid Supply Company Part Number: MFP-361
Lubricators - These lubricators are designed to provide optimum and uniform lubrication with fine micro-mist particles of two micron or smaller. Units should be installed close to the application, ensuring effective distribution of oil to pneumatic components. All units have a polycarbonate bowl. Metal bowl guards sold separately. Maximum pressure is 150 psi and temperature range of 32°F to 125°F. | *$61.12 |
| 2. Bore x 1. Stroke, Double Acting, Universal Mount, Clippard Stainless Steel Pneumatic Cylinders (1 Each)
Brand: Reid Supply Company Part Number: PAC-310
2" Bore Universal Mount Double Acting | *$60.97 |
 | 2. Bore x 4. Stroke, Double Acting, Stud Mount, Clippard Stainless Steel Pneumatic Cylinders (1 Each)
Brand: Reid Supply Company Part Number: PAC-305
2" Bore Stud Mount Double Acting | *$60.86 |
 | 1/2 NPT Ports, 1 1/2 Inlet, 8 Port, Nylon Manifolds, Blue (1 Each)
Brand: Reid Supply Company Part Number: NM-08
Nylon - An economical replacement to steel manifolds. Nylon manifolds are molded from specialty-blended nylon material that is extremely durable and resistant to impact and corrosion. Used for air, water, lubricants or coolants in various applications. The nylon, with 6% fiberglass fill construction, allows leak-free NPT pipe connections. Can be used with steel or brass fittings. Marked in and out and numbered porting for easy installation and identification. | *$60.19 |
 | 30 L/Min. Parker Vacuum Generator (Parker #CV-10HSN) (1 Each)
Brand: Reid Supply Company Part Number: MFP-460
Vacuum Generators - Vacuum generators are designed to be compact and lightweight with a minimal air consumption and high vacuum levels. 5 micron filter of unlubricated air and pressure range of 20 to 110 psi with a temperature range of 10°F to 160°F. Removable cartridge on MFP-463. | *$60.06 |
| | 3/8-24 Thd., Rod Clevis Assemblies, Use w/Bore Size 1 1/4 (1 Each)
Brand: Reid Supply Company Part Number: PAC-650
Rod Clevis Assemblies | *$6.95 |
| | 7/16-20 Thd., Rod Clevis Assemblies, Use w/Bore Size 1 1/2 (1 Each)
Brand: Reid Supply Company Part Number: PAC-660
Rod Clevis Assemblies | *$6.95 |
 | Mounting Brackets for 3/4 inlet Size (1 Each)
Brand: Reid Supply Company Part Number: NM-105
Mounting Bracket | *$6.69 |
 | 1 1/2-12 Thd., Parker Mounting Nuts, Use w/Cylinder Bore Size 3. (1 Each)
Brand: Reid Supply Company Part Number: MFP-551
Accessories - Mounting Nuts | *$6.67 |
 | Clevis Mounting Brackets, Use w/Bore Size 1 1/4, 1 1/2 (1 Each)
Brand: Reid Supply Company Part Number: PAC-750
Clevis Mounting Brackets | *$6.42 |
 | Parker Silencer (1 Each)
Brand: Reid Supply Company Part Number: MFP-1000
Silencer - Designed to give excellent noise reduction with a minimum effect on air efficiency. Silencer fits into tight places without extra plumbing or fittings due to its trim design. Fits directly into the exhaust port of most commercial valves. Open surface of element allows for rapid discharge of air without undesirable back pressure. Body is acetal, and element is polyethylene. Pressure rating is 0 to 150 psi. SCFM rate is 124 with a 100 psi inlet. Temperature rating is 14°F to 140°F. Thread size is 1/4". Other NPT and BSPT threads available as special orders. Please call for price and delivery. | *$6.24 |
 | 1/4 NPT Ports, 1. Inlet, 16 Port, Nylon Manifolds, Blue (1 Each)
Brand: Reid Supply Company Part Number: NM-13
Nylon - An economical replacement to steel manifolds. Nylon manifolds are molded from specialty-blended nylon material that is extremely durable and resistant to impact and corrosion. Used for air, water, lubricants or coolants in various applications. The nylon, with 6% fiberglass fill construction, allows leak-free NPT pipe connections. Can be used with steel or brass fittings. Marked in and out and numbered porting for easy installation and identification. | *$59.15 |
 | 1 1/4 Bore x 4. Stroke, Double Acting - Rear Pivot Mount, Parker Air Cylinders (1 Each)
Brand: Reid Supply Company Part Number: MFP-84
Rear Pivot Mount - Double Acting - MFP-62 through MFP-106 include a mounting nut. | *$59.07 |
| 3/8 NPT Ports, 1. Inlet, 16 Port, Nylon Manifolds, Blue (1 Each)
Brand: Reid Supply Company Part Number: NM-14
Nylon - An economical replacement to steel manifolds. Nylon manifolds are molded from specialty-blended nylon material that is extremely durable and resistant to impact and corrosion. Used for air, water, lubricants or coolants in various applications. The nylon, with 6% fiberglass fill construction, allows leak-free NPT pipe connections. Can be used with steel or brass fittings. Marked in and out and numbered porting for easy installation and identification. | *$59.05 |
 | 1/2 NPT Inlet Port, 1/2 NPT Cyl. Port, 1/2 NPT Exaust Port, 450 SCFM Flow, Parker Quick Exhaust and Shuttle Valves w/Urethane DiaPhram (1 Each)
Brand: Reid Supply Company Part Number: MFP-215
Quick Exhaust and Shuttle Valves With Urethane Diaphragm | *$58.29 |
| 2. Bore x 3. Stroke, Double Acting, Stud Mount, Clippard Stainless Steel Pneumatic Cylinders (1 Each)
Brand: Reid Supply Company Part Number: PAC-300
2" Bore Stud Mount Double Acting | *$58.19 |
 | 1/2 NPT Ports, 1. NPT Inlet, 6 Port, 2.25 W x 14.25 Lg., Aluminum Single Sided Port Manifolds (1 Each)
Brand: Reid Supply Company Part Number: MM-360
Single Sided Ports - Provides a convenient junction point for branching off a single line on distribution systems. Can be used on air, hydraulic, water, coolant, machine and other distribution lines. Made of 6061 aluminum with black anodized finish unless noted below. Eight drilled mounting holes (two per side). Operating pressure: 1,000 psi air and, 5,000 psi non-shock hydraulic. All threads are NPT. Other lengths, threads and number of holes as well as custom sizes and configurations are available as special order. Please call for price and delivery for sizes not listed below. | *$58.13 |
| 3/8 NPT Ports, 1. NPT Inlet, 6 Port, 2.25 W x 14.25 Lg., Aluminum Single Sided Port Manifolds (1 Each)
Brand: Reid Supply Company Part Number: MM-350
Single Sided Ports - Provides a convenient junction point for branching off a single line on distribution systems. Can be used on air, hydraulic, water, coolant, machine and other distribution lines. Made of 6061 aluminum with black anodized finish unless noted below. Eight drilled mounting holes (two per side). Operating pressure: 1,000 psi air and, 5,000 psi non-shock hydraulic. All threads are NPT. Other lengths, threads and number of holes as well as custom sizes and configurations are available as special order. Please call for price and delivery for sizes not listed below. | *$58.13 |
 | 1/8 NPT, 120 V AC, 4-Way Body Ported, ARO Selenoid Valves (1 Each)
Brand: Reid Supply Company Part Number: ARO-425
Solenoid Valves - The 3-way and 4-way valves are 2-position, with a single solenoid and spring return. Valves are direct acting and have a non-locking manual override. Stacking models are great for multi-valve applications where space is limited. CFM on all models is 6.9; Cv is 0.2. Maximum temperature range is 0° to 180°F. Maximum operating pressure is 120 psi. | *$57.40 |
 | 1 1/4 Bore x 6. Stroke, Double Acting - Front Nose Mount, Parker Air Cylinders (1 Each)
Brand: Reid Supply Company Part Number: MFP-21
Front Nose Mount - Double Acting | *$57.13 |
| 1 1/2 Bore x 4. Stroke, Double Acting - Front Nose Mount, Parker Air Cylinders (1 Each)
Brand: Reid Supply Company Part Number: MFP-25
Front Nose Mount - Double Acting | *$56.97 |
 | 3/4 Bore x 3. Stroke, Double Acting, Compact, ARO Composite Air Cylinders (1 Each)
Brand: Reid Supply Company Part Number: ARO-620
Cylinders are double acting, with a single rod end. Cylinder barrel is made from a unique cross-wound thermo set epoxy. This creates a very strong and lightweight cylinder. The high impact resistance reduces the chances of cylinder failure due to dings or dents. Interior surface is self-lubricating, which insures highly reliable performance and an extended seal life. Cylinder heads are clear anodized aluminum alloy with stainless steel tie bolts. Maximum pressure is 200 psi. Cylinder temperature rating is -25°F to +225°F. | *$56.63 |
 | 1 3/4 Bore x 4. Stroke, Double Acting, Stud Mount, Clippard Stainless Steel Pneumatic Cylinders (1 Each)
Brand: Reid Supply Company Part Number: PAC-265
1-3/4" Bore Stud Mount Double Acting | *$56.09 |
| 3/8 NPT Ports, 3/4 Inlet, 8 Port, 1.50 Hex. x 11. Lg., Aluminum Manifolds, Black (1 Each)
Brand: Reid Supply Company Part Number: NM-207
Aluminum - Ready to use, no threading required. Positive seal. Use with brass or steel fittings. Hardcoat color anodized finish available in black, blue, or red. Other sizes, hole configurations and colors available as special orders. Please call for price and delivery. Automotive tested approval. Tensile 38,000 psi, yield 35,000 psi. Hardened to T6511. Can withstand pH 4.5. Honed ID. Dipped to remove blemishes and chips. Brackets are sold separately. | *$54.82 |
 | 3/4 NPT, Parker Filters (1 Each)
Brand: Reid Supply Company Part Number: MFP-359
Filters - These filters provide excellent water removal efficiency. Unique deflector plate and shroud creates a swirling of the air stream, ensuring maximum water and dirt separation. Operating pressure is 150 psi and a temperature range of 32°F to 125°F. Each unit comes with a 40 micron filter and polycarbonate bowl. Metal and bowl guards sold separately. | *$54.19 |
| 1/2 NPT, Parker Filters (1 Each)
Brand: Reid Supply Company Part Number: MFP-358
Filters - These filters provide excellent water removal efficiency. Unique deflector plate and shroud creates a swirling of the air stream, ensuring maximum water and dirt separation. Operating pressure is 150 psi and a temperature range of 32°F to 125°F. Each unit comes with a 40 micron filter and polycarbonate bowl. Metal and bowl guards sold separately. | *$54.19 |
| 1 1/2 Bore x 2. Stroke, Double Acting - Front Nose Mount, Parker Air Cylinders (1 Each)
Brand: Reid Supply Company Part Number: MFP-23
Front Nose Mount - Double Acting | *$54.14 |
| 1/8 NPT, 24 V DC, 4-Way Body Ported, ARO Selenoid Valves (1 Each)
Brand: Reid Supply Company Part Number: ARO-430
Solenoid Valves - The 3-way and 4-way valves are 2-position, with a single solenoid and spring return. Valves are direct acting and have a non-locking manual override. Stacking models are great for multi-valve applications where space is limited. CFM on all models is 6.9; Cv is 0.2. Maximum temperature range is 0° to 180°F. Maximum operating pressure is 120 psi. | *$54.03 |
| 3/4 Bore x 2. Stroke, Double Acting, Compact, ARO Composite Air Cylinders (1 Each)
Brand: Reid Supply Company Part Number: ARO-615
Cylinders are double acting, with a single rod end. Cylinder barrel is made from a unique cross-wound thermo set epoxy. This creates a very strong and lightweight cylinder. The high impact resistance reduces the chances of cylinder failure due to dings or dents. Interior surface is self-lubricating, which insures highly reliable performance and an extended seal life. Cylinder heads are clear anodized aluminum alloy with stainless steel tie bolts. Maximum pressure is 200 psi. Cylinder temperature rating is -25°F to +225°F. | *$54.00 |
| 1/8 NPT, 12 V DC, 4-Way Body Ported, ARO Selenoid Valves (1 Each)
Brand: Reid Supply Company Part Number: ARO-435
Solenoid Valves - The 3-way and 4-way valves are 2-position, with a single solenoid and spring return. Valves are direct acting and have a non-locking manual override. Stacking models are great for multi-valve applications where space is limited. CFM on all models is 6.9; Cv is 0.2. Maximum temperature range is 0° to 180°F. Maximum operating pressure is 120 psi. | *$53.68 |
| 1 1/2 Bore x 3. Stroke, Double Acting - Front Nose Mount, Parker Air Cylinders (1 Each)
Brand: Reid Supply Company Part Number: MFP-24
Front Nose Mount - Double Acting | *$53.63 |
| 2. Bore x 1. Stroke, Double Acting, Stud Mount, Clippard Stainless Steel Pneumatic Cylinders (1 Each)
Brand: Reid Supply Company Part Number: PAC-290
2" Bore Stud Mount Double Acting | *$52.83 |
| 3/4 Bore x 1. Stroke, Double Acting, Compact, ARO Composite Air Cylinders (1 Each)
Brand: Reid Supply Company Part Number: ARO-610
Cylinders are double acting, with a single rod end. Cylinder barrel is made from a unique cross-wound thermo set epoxy. This creates a very strong and lightweight cylinder. The high impact resistance reduces the chances of cylinder failure due to dings or dents. Interior surface is self-lubricating, which insures highly reliable performance and an extended seal life. Cylinder heads are clear anodized aluminum alloy with stainless steel tie bolts. Maximum pressure is 200 psi. Cylinder temperature rating is -25°F to +225°F. | *$51.44 |
| 3/8 NPT Ports, 1. NPT Inlet, 4 Port, 2.25 W x 9.75 Lg., Aluminum Single Sided Port Manifolds (1 Each)
Brand: Reid Supply Company Part Number: MM-240
Single Sided Ports - Provides a convenient junction point for branching off a single line on distribution systems. Can be used on air, hydraulic, water, coolant, machine and other distribution lines. Made of 6061 aluminum with black anodized finish unless noted below. Eight drilled mounting holes (two per side). Operating pressure: 1,000 psi air and, 5,000 psi non-shock hydraulic. All threads are NPT. Other lengths, threads and number of holes as well as custom sizes and configurations are available as special order. Please call for price and delivery for sizes not listed below. | *$51.40 |
| 1/4 NPT Ports, 1. NPT Inlet, 4 Port, 2.25 W x 9.75 Lg., Aluminum Single Sided Port Manifolds (1 Each)
Brand: Reid Supply Company Part Number: MM-230
Single Sided Ports - Provides a convenient junction point for branching off a single line on distribution systems. Can be used on air, hydraulic, water, coolant, machine and other distribution lines. Made of 6061 aluminum with black anodized finish unless noted below. Eight drilled mounting holes (two per side). Operating pressure: 1,000 psi air and, 5,000 psi non-shock hydraulic. All threads are NPT. Other lengths, threads and number of holes as well as custom sizes and configurations are available as special order. Please call for price and delivery for sizes not listed below. | *$51.40 |
| 1/2 NPT Ports, 1. NPT Inlet, 4 Port, 2.25 W x 9.75 Lg., Aluminum Single Sided Port Manifolds (1 Each)
Brand: Reid Supply Company Part Number: MM-250
Single Sided Ports - Provides a convenient junction point for branching off a single line on distribution systems. Can be used on air, hydraulic, water, coolant, machine and other distribution lines. Made of 6061 aluminum with black anodized finish unless noted below. Eight drilled mounting holes (two per side). Operating pressure: 1,000 psi air and, 5,000 psi non-shock hydraulic. All threads are NPT. Other lengths, threads and number of holes as well as custom sizes and configurations are available as special order. Please call for price and delivery for sizes not listed below. | *$51.40 |
| 1 3/4 Bore x 2. Stroke, Double Acting, Stud Mount, Clippard Stainless Steel Pneumatic Cylinders (1 Each)
Brand: Reid Supply Company Part Number: PAC-255
1-3/4" Bore Stud Mount Double Acting | *$50.84 |
 | 3/8 NPT Ports, 1. Inlet, 4 Port, 1.75 Hex. x 11. Lg., Aluminum Manifolds, Blue (1 Each)
Brand: Reid Supply Company Part Number: NM-303
Aluminum - Ready to use, no threading required. Positive seal. Use with brass or steel fittings. Hardcoat color anodized finish available in black, blue, or red. Other sizes, hole configurations and colors available as special orders. Please call for price and delivery. Automotive tested approval. Tensile 38,000 psi, yield 35,000 psi. Hardened to T6511. Can withstand pH 4.5. Honed ID. Dipped to remove blemishes and chips. Brackets are sold separately. | *$50.71 |
 | 3/8 NPT Ports, 1. Inlet, 4 Port, 1.75 Hex. x 11. Lg., Aluminum Manifolds, Red (1 Each)
Brand: Reid Supply Company Part Number: NM-403
Aluminum - Ready to use, no threading required. Positive seal. Use with brass or steel fittings. Hardcoat color anodized finish available in black, blue, or red. Other sizes, hole configurations and colors available as special orders. Please call for price and delivery. Automotive tested approval. Tensile 38,000 psi, yield 35,000 psi. Hardened to T6511. Can withstand pH 4.5. Honed ID. Dipped to remove blemishes and chips. Brackets are sold separately. | *$50.17 |
| 1/4 NPT Ports, 3/4 Inlet, 8 Port, 1.50 Hex. x 11. Lg., Aluminum Manifolds, Red (1 Each)
Brand: Reid Supply Company Part Number: NM-406
Aluminum - Ready to use, no threading required. Positive seal. Use with brass or steel fittings. Hardcoat color anodized finish available in black, blue, or red. Other sizes, hole configurations and colors available as special orders. Please call for price and delivery. Automotive tested approval. Tensile 38,000 psi, yield 35,000 psi. Hardened to T6511. Can withstand pH 4.5. Honed ID. Dipped to remove blemishes and chips. Brackets are sold separately. | *$50.03 |
| 1/4 NPT Ports, 3/4 Inlet, 8 Port, 1.50 Hex. x 11. Lg., Aluminum Manifolds, Black (1 Each)
Brand: Reid Supply Company Part Number: NM-206
Aluminum - Ready to use, no threading required. Positive seal. Use with brass or steel fittings. Hardcoat color anodized finish available in black, blue, or red. Other sizes, hole configurations and colors available as special orders. Please call for price and delivery. Automotive tested approval. Tensile 38,000 psi, yield 35,000 psi. Hardened to T6511. Can withstand pH 4.5. Honed ID. Dipped to remove blemishes and chips. Brackets are sold separately. | *$50.03 |
| 3/8 NPT Ports, 3/4 Inlet, 8 Port, 1.50 Hex. x 11. Lg., Aluminum Manifolds, Blue (1 Each)
Brand: Reid Supply Company Part Number: NM-307
Aluminum - Ready to use, no threading required. Positive seal. Use with brass or steel fittings. Hardcoat color anodized finish available in black, blue, or red. Other sizes, hole configurations and colors available as special orders. Please call for price and delivery. Automotive tested approval. Tensile 38,000 psi, yield 35,000 psi. Hardened to T6511. Can withstand pH 4.5. Honed ID. Dipped to remove blemishes and chips. Brackets are sold separately. | *$50.03 |
| 1/4 NPT Ports, 3/4 Inlet, 8 Port, 1.50 Hex. x 11. Lg., Aluminum Manifolds, Blue (1 Each)
Brand: Reid Supply Company Part Number: NM-306
Aluminum - Ready to use, no threading required. Positive seal. Use with brass or steel fittings. Hardcoat color anodized finish available in black, blue, or red. Other sizes, hole configurations and colors available as special orders. Please call for price and delivery. Automotive tested approval. Tensile 38,000 psi, yield 35,000 psi. Hardened to T6511. Can withstand pH 4.5. Honed ID. Dipped to remove blemishes and chips. Brackets are sold separately. | *$50.03 |
|
