 | Enerpac Hydraulic Power Workholding Hollow Cylinder, No. CY2754-5 (1 Each)
Brand: Reid Supply Company Part Number: CY2754-5
These hollow cylinders combine compactness with power and versatility. Any application requiring either a pushing or pulling action is easily handled with this type of cylinder. The cylinders are threaded and can be placed over a bolt or a stud to upgrade most existing manual clamping fixtures. | *$443.00 |
 | Enerpac Hydraulic Power Workholding Swing Cylinder Short Arm No. CAS-51, Use w/cap. = 1,250 lbs. (1 Each)
Brand: Reid Supply Company Part Number: CAS-51
These clamp arms are designed for use with the swing cylinders shown above. Clamp arms can be positioned and tightened without removing the swing cylinder from the fixture. Clamp arm design eliminates the use of a vise when securing to a plunger. Short arms have a tapped hole for buttons and toggle pads. Long arms can be shortened to desired length. | *$44.00 |
 | Enerpac Hydraulic Power Workholding No. SURS51, Light Duty, Single Acting, Upper Flange, w/o Arm (1 Each)
Brand: Reid Supply Company Part Number: SURS-51
These swing cylinders rotate 90degrees as they begin their stroke, continuing without rotation for the final clamping stroke. Cylinders can be changed to left swing, right swing or pull applications by loosening the bottom plug. All single acting cylinders come with a retract spring for single-acting operations. Max. psi 5,000. Clamp arms not included but sold separately below. Body styles available are threaded with upper flange or non-threaded with lower or upper flange." | *$430.00 |
 | Enerpac Hydraulic Power Workholding Sequence Valve For Time Interval Control No. WVP-5 (1 Each)
Brand: Reid Supply Company Part Number: WVP-5
These valves can be plumbed to provide a sequence of clamping functions from just one hydraulic power source. Sequenced locating, clamping, and/or supporting functions can be controlled in a logical order by plumbing one sequence valve to each clamping group requiring a different time interval. The valve can be preset to different pressure values, allowing fluid flow in sequence as the hydraulic pressure increases in the entire system to whatever the power source provides, after all valves are open. These valves are basically timers, not pressure controllers. The VE-211 features a lock nut which secures the hydraulic pressure setting for the secondary circuit and a tamper proof cover can be placed over the set screw. Maximum operating pressure is 5,000 psi." | *$406.00 |
 | Enerpac Hydraulic Power Workholding No. SLRS51, Light Duty, Single Acting, Lower Flange, w/o Arm (1 Each)
Brand: Reid Supply Company Part Number: SLRS-51
These swing cylinders rotate 90degrees as they begin their stroke, continuing without rotation for the final clamping stroke. Cylinders can be changed to left swing, right swing or pull applications by loosening the bottom plug. All single acting cylinders come with a retract spring for single-acting operations. Max. psi 5,000. Clamp arms not included but sold separately below. Body styles available are threaded with upper flange or non-threaded with lower or upper flange." | *$398.00 |
 | Enerpac Hydraulic Power Workholding No. STRS121, Light Duty, Single Acting, Threaded, w/o Arm (1 Each)
Brand: Reid Supply Company Part Number: STRS-121
These swing cylinders rotate 90degrees as they begin their stroke, continuing without rotation for the final clamping stroke. Cylinders can be changed to left swing, right swing or pull applications by loosening the bottom plug. All single acting cylinders come with a retract spring for single-acting operations. Max. psi 5,000. Clamp arms not included but sold separately below. Body styles available are threaded with upper flange or non-threaded with lower or upper flange." | *$398.00 |
 | De-Sta-Co Hydraulic Power Workholding, Threaded Body Swing/Pull Clamp, Swing LH, Single Acting (1 Each)
Brand: Reid Supply Company Part Number: 030-1-S-2400 | *$382.64 |
 | Enerpac Hydraulic Power Workholding Jam Nut No. JN-12, 1 7/8-16 (1 Each)
Brand: Reid Supply Company Part Number: FN-481 | *$34.00 |
 | De-Sta-Co Hydraulic Power Workholding, Swing/Pull Clamp Arm, A = 1.929, B = .709, C = M6 (1 Each)
Brand: Reid Supply Company Part Number: 031-S-475
Custom built arms of any length must clamp to the swing/pull clamp's piston rod in a manner similar to the arms or some derating of the clamp will be necessary. IMPORTANT: Any clamp using a modified or custom arm that is longer or heavier than standard arms must be derated to prevent internal damage. | *$33.09 |
 | De-Sta-Co Hydraulic Power Workholding, Threaded Body Swing/Pull Clamp, Swing LH, Double Acting (1 Each)
Brand: Reid Supply Company Part Number: 030-1-D-475 | *$302.37 |
| De-Sta-Co Hydraulic Power Workholding, Threaded Body Swing/Pull Clamp, Swing LH, Single Acting (1 Each)
Brand: Reid Supply Company Part Number: 030-1-S-475 | *$302.37 |
 | De-Sta-Co Hydraulic Power Workholding, Threaded Body Swing/Pull Clamp, Swing RH, Double Acting (1 Each)
Brand: Reid Supply Company Part Number: 030-1-D-475-R | *$302.37 |
 | De-Sta-Co Hydraulic Power Workholding, Threaded Body Swing/Pull Clamp, Swing RH, Single Acting (1 Each)
Brand: Reid Supply Company Part Number: 030-1-S-475-R | *$302.37 |
| Enerpac Hydraulic Power Workholding No. STRS21, Light Duty, Single Acting, Threaded, w/o Arm (1 Each)
Brand: Reid Supply Company Part Number: STRS-21
These swing cylinders rotate 90degrees as they begin their stroke, continuing without rotation for the final clamping stroke. Cylinders can be changed to left swing, right swing or pull applications by loosening the bottom plug. All single acting cylinders come with a retract spring for single-acting operations. Max. psi 5,000. Clamp arms not included but sold separately below. Body styles available are threaded with upper flange or non-threaded with lower or upper flange." | *$301.00 |
| Enerpac Hydraulic Power Workholding Jam Nut No. JN-48, 1 5/16-16 (1 Each)
Brand: Reid Supply Company Part Number: FN-331 | *$30.50 |
 | De-Sta-Co Hydraulic Power Workholding, Block Cylinder, Single Acting, C = 2.68, O = 1/2-13 (1 Each)
Brand: Reid Supply Company Part Number: 090-013-332 | *$279.41 |
 | De-Sta-Co Hydraulic Power Workholding, Block Cylinder, Double Acting, C = 2.68, O = 1/2-13 (1 Each)
Brand: Reid Supply Company Part Number: 090-023-333 | *$277.62 |
| De-Sta-Co Hydraulic Power Workholding, Block Cylinder, Single Acting, C = 3.651, O = 5/16-24 (1 Each)
Brand: Reid Supply Company Part Number: 090-012-224 | *$277.07 |
 | Enerpac Hydraulic Power Workholding Clamping Cylinder, Single Action, No. RW-102 (1 Each)
Brand: Reid Supply Company Part Number: RW-102
Used for a wide range of production tooling applications, heavy duty force requirements and high cycle applications. Block shaped clamps provide a high amount of force in a tight area. Designed to be surface mounted on the machine tool bed or on a fixture surface. Provide force in horizontal or vertical direction. Cylindrical clamps have collar threads and base holes for mounting. All have spring return operation for easy unloading of workpiece and faster cycling. Spring is designed to return plunger only." | *$274.00 |
| Enerpac Hydraulic Power Workholding Hollow Cylinder, No. CY1254-25 (1 Each)
Brand: Reid Supply Company Part Number: CY1254-25
These hollow cylinders combine compactness with power and versatility. Any application requiring either a pushing or pulling action is easily handled with this type of cylinder. The cylinders are threaded and can be placed over a bolt or a stud to upgrade most existing manual clamping fixtures. | *$260.00 |
 | Enerpac Hydraulic Power Workholding Clamping Cylinder, Single Action, No. RW-55 (1 Each)
Brand: Reid Supply Company Part Number: RW-55
Used for a wide range of production tooling applications, heavy duty force requirements and high cycle applications. Block shaped clamps provide a high amount of force in a tight area. Designed to be surface mounted on the machine tool bed or on a fixture surface. Provide force in horizontal or vertical direction. Cylindrical clamps have collar threads and base holes for mounting. All have spring return operation for easy unloading of workpiece and faster cycling. Spring is designed to return plunger only." | *$250.00 |
 | De-Sta-Co Hydraulic Power Workholding, Spring Advance Work Support, Capacity = 5,000 lbs. (1 Each)
Brand: Reid Supply Company Part Number: 040-1-5000 | *$248.68 |
 | Enerpac Hydraulic Power Workholding Hollow Cylinder, No. RWH-20 (1 Each)
Brand: Reid Supply Company Part Number: RWH-20
These hollow cylinders combine compactness with power and versatility. Any application requiring either a pushing or pulling action is easily handled with this type of cylinder. The cylinders are threaded and can be placed over a bolt or a stud to upgrade most existing manual clamping fixtures. | *$245.00 |
 | De-Sta-Co Hydraulic Power Workholding, Threaded Body Cylinder, Single Acting, D=2.500-16, K=1/2-13 (1 Each)
Brand: Reid Supply Company Part Number: 010-013-334 | *$238.15 |
| Enerpac Hydraulic Power Workholding Clamping Cylinder, Single Action, No. RW-53 (1 Each)
Brand: Reid Supply Company Part Number: RW-53
Used for a wide range of production tooling applications, heavy duty force requirements and high cycle applications. Block shaped clamps provide a high amount of force in a tight area. Designed to be surface mounted on the machine tool bed or on a fixture surface. Provide force in horizontal or vertical direction. Cylindrical clamps have collar threads and base holes for mounting. All have spring return operation for easy unloading of workpiece and faster cycling. Spring is designed to return plunger only." | *$236.00 |
| De-Sta-Co Hydraulic Power Workholding, Block Cylinder, Double Acting, C = 2.441, O = 5/16-24 (1 Each)
Brand: Reid Supply Company Part Number: 090-022-222 | *$235.49 |
 | De-Sta-Co Hydraulic Power Workholding, Spring Advance Work Support, Capacity = 1,650 lbs. (1 Each)
Brand: Reid Supply Company Part Number: 040-1-1650 | *$233.52 |
| De-Sta-Co Hydraulic Power Workholding, Block Cylinder, Single Acting, C = 2.441, O = 5/16-24 (1 Each)
Brand: Reid Supply Company Part Number: 090-012-221 | *$225.35 |
| De-Sta-Co Hydraulic Power Workholding, Block Cylinder, Single Acting, C = 2.998, O = 1/4-20 (1 Each)
Brand: Reid Supply Company Part Number: 090-011-113 | *$224.71 |
| De-Sta-Co Hydraulic Power Workholding, Threaded Body Cylinder, Double Acting, D=2.500-16, K=1/2-13 (1 Each)
Brand: Reid Supply Company Part Number: 010-023-335 | *$221.72 |
| De-Sta-Co Hydraulic Power Workholding, Block Cylinder, Double Acting, C = 2.998, O = 1/4-20 (1 Each)
Brand: Reid Supply Company Part Number: 090-021-114 | *$219.89 |
 | De-Sta-Co Hydraulic Power Workholding, Spring Advance Work Support, Capacity = 2,500 lbs. (1 Each)
Brand: Reid Supply Company Part Number: 040-1-2500 | *$217.34 |
 | Enerpac Hydraulic Power Workholding Clamping Cylinder, Single Action, No. RW-50 (1 Each)
Brand: Reid Supply Company Part Number: RW-50
Used for a wide range of production tooling applications, heavy duty force requirements and high cycle applications. Block shaped clamps provide a high amount of force in a tight area. Designed to be surface mounted on the machine tool bed or on a fixture surface. Provide force in horizontal or vertical direction. Cylindrical clamps have collar threads and base holes for mounting. All have spring return operation for easy unloading of workpiece and faster cycling. Spring is designed to return plunger only." | *$209.00 |
 | Enerpac Hydraulic Power Workholding Work Support, Spring Advanced, No. WSL-111 (1 Each)
Brand: Reid Supply Company Part Number: WSL-111
Work supports provide additional support to avoid excessive movement or deflection of the workpiece during machining. When hydraulic pressure is applied to the work support, a piston pushes against an internal adjustable spring that advances the work support plunger against a workpiece at the force set by the adjustable spring. As more hydraulic pressure is applied, an internal sleeve will grip and lock the plunger in that position. Available as a spring or fluid advance unit. The spring advanced unit can be converted to air by simply removing the internal adjustment spring and attaching a low pressure air line to the air breather vent tube. Operating pressure is 700 psi minimum, 5,000 psi maximum." | *$207.00 |
| De-Sta-Co Hydraulic Power Workholding, Threaded Body Cylinder, Single Acting, D=2.500-16, K=1/2-13 (1 Each)
Brand: Reid Supply Company Part Number: 010-013-332 | *$200.18 |
| De-Sta-Co Hydraulic Power Workholding, Block Cylinder, Double Acting, C = 2.128, O = 1/4-20 (1 Each)
Brand: Reid Supply Company Part Number: 090-021-111 | *$199.24 |
| De-Sta-Co Hydraulic Power Workholding, Threaded Body Cylinder, Double Acting, D=2.500-16, K=1/2-13 (1 Each)
Brand: Reid Supply Company Part Number: 010-023-333 | *$190.66 |
| De-Sta-Co Hydraulic Power Workholding, Threaded Body Cylinder, Single Acting, D=1.875-16, K=5/16-24 (1 Each)
Brand: Reid Supply Company Part Number: 010-012-224 | *$186.75 |
 | Enerpac Hydraulic Power Workholding Rest Button No. B3328, 8-32 thds., .28 Lg. (1 Each)
Brand: Reid Supply Company Part Number: B332-8 | *$18.50 |
| De-Sta-Co Hydraulic Power Workholding, Threaded Body Cylinder, Double Acting, D=1.875-16, K=5/16-24 (1 Each)
Brand: Reid Supply Company Part Number: 010-022-225 | *$171.77 |
| De-Sta-Co Hydraulic Power Workholding, Threaded Body Cylinder, Single Acting, D=1.875-16, K=5/16-24 (1 Each)
Brand: Reid Supply Company Part Number: 010-012-221 | *$154.88 |
 | Enerpac Hydraulic Power Workholding Single Acting Manifold Cylinder, No. TS-18251ST (1 Each)
Brand: Reid Supply Company Part Number: CST18251
These threaded miniature cylinders were designed specifically for tooling. All cylinders are single-acting with spring return action for rapid work release. They have threaded bodies for all types of mountings. Cylinders may be inserted directly in a fixture or used with standard brackets. Stainless steel construction. Maximum operating pressure 5,000 psi. See our full line catalog for accessories." | *$140.00 |
| De-Sta-Co Hydraulic Power Workholding, Threaded Body Cylinder, Double Acting, D=1.750-16, K=1/4-20 (1 Each)
Brand: Reid Supply Company Part Number: 010-021-111 | *$139.36 |
| Enerpac Hydraulic Power Workholding Single Acting Manifold Cylinder, No. TS-18131ST (1 Each)
Brand: Reid Supply Company Part Number: CTS18131
These threaded miniature cylinders were designed specifically for tooling. All cylinders are single-acting with spring return action for rapid work release. They have threaded bodies for all types of mountings. Cylinders may be inserted directly in a fixture or used with standard brackets. Stainless steel construction. Maximum operating pressure 5,000 psi. See our full line catalog for accessories." | *$125.00 |
| Enerpac Hydraulic Power Workholding Single Acting Manifold Cylinder, No. TS-9381ST (1 Each)
Brand: Reid Supply Company Part Number: CST-9381
These threaded miniature cylinders were designed specifically for tooling. All cylinders are single-acting with spring return action for rapid work release. They have threaded bodies for all types of mountings. Cylinders may be inserted directly in a fixture or used with standard brackets. Stainless steel construction. Maximum operating pressure 5,000 psi. See our full line catalog for accessories." | *$125.00 |
| Enerpac Hydraulic Power Workholding Single Acting Manifold Cylinder, No. TS-9251ST (1 Each)
Brand: Reid Supply Company Part Number: TS-9251ST
These threaded miniature cylinders were designed specifically for tooling. All cylinders are single-acting with spring return action for rapid work release. They have threaded bodies for all types of mountings. Cylinders may be inserted directly in a fixture or used with standard brackets. Stainless steel construction. Maximum operating pressure 5,000 psi. See our full line catalog for accessories." | *$108.00 |
 | Enerpac Hydraulic Power Workholding Air/Hydraulic Booster No. B-5003 (1 Each)
Brand: Reid Supply Company Part Number: B-5003
These air/hydraulic boosters are a one-shot spring return booster power source. Connect shop air and hydraulic output line for system operation of single-acting cylinders and clamps. Internal self-bleeding feature automatically purges air from system when booster is at the highest point in the circuit. Made of aluminum. Ideal for high cycle, long life production applications. Maximum cycle rate is 10 per minute and air consumption is .95 cu. ft./stroke. Features a built in stroke sensor for automatic cycling operation." | *$1,175.00 |
 | Enerpac Hydraulic Power Workholding Turbo Air/Hydraulic Pump No. PAMG-5402NB (1 Each)
Brand: Reid Supply Company Part Number: PAMG-5402NB
A turbo air pump is recommended where input air pressure is limited. Engineered to recycle exhaust air to help power the pump. Maintains a tight pressure range for reliable clamping performance. Pump will automatically restart in the event of a pressure drop in the hydraulic system. Mounting plate allows for horizontal or vertical machine-side mounting. Buna-N polyurethane and Teflon seals. | *$1,051.00 |
 | 110-Piece Hydraulic Grease Fitting Assortment - SAE
Brand: RRT
*High-quality zinc-coated steel grease zerk fittings for the most-common SAE applications*Includes: 30 straight 1/4"-28 zerks, 20 straight 1/8" pipe zerk*15 - 45-degree 1/4"-28 zerks, 15 - 90-degree 1/4:-28 zerks*15 - 90-degree 1/8" zerks, 15 - 45-degree 1/8" zerks*Complete it clear-view reclosable case to keep all organized, easy to identity. | *$8.78 |
| 110-Piece Hydraulic Grease Fitting Assortment - Metric
Brand: RRT
*High-quality zinc-coated steel grease zerk fittings for the most-common Metric applications*Includes: 30 straight M6 zerks, 20 90-degree M6 zerks*20 straight M8 zerks, 10 - 90-degree M8 zerks*20 straight M10 zerks, 10 - 90-degree M10 zerks*Complete it clear-view reclosable case to keep all organized, easy to identity. | *$7.67 |
