 | IMPERIAL 97362 QUICK DISCONNECT COUPLER PLUG 3/8"x3/8"MNPT(PACK OF 2)
Brand: Imperial Model: 97362 Part Number: 97362
"IMPERIAL" QUICK DISCONNECT COUPLER PLUG
Body Style: 3/8"
Male NPT: 3/8"
Corrosion resistant finish.
Case hardened plugs.
Maximum Air Pressure: 300 psi
Heavy-duty quick disconnect coupler plugs.
Male Pipe Thread, Industrial Design.
Manufactured of high-grade alloy steel.
For low pressure pneumatic lines primarily used for air. | *$6.69 |
 | IMPERIAL 90768 COMPRESSION ANGLE NEEDLE VALVE 1/8" (PACK OF 5)
Brand: Imperial Model: 90768 Part Number: 90768
"IMPERIAL" ANGLE NEEDLE VALVE
Compression Angle Needle Valve.
Brass body and steel handle.
Designed for automotive or industrial use. Not intended for natural gas, LPG, nuclear, or aircraft applications.
Temperature Range: -65° F. to 250° F. however, system temperature and type of tubing should be considered.
Pressure Range: 150 psi maximum
Tube Outside Diameter: 1/4"
Pipe Thread: 1/8"
Cross Reference: A555 | *$59.74 |
 | IMPERIAL 91108 PERMALIGN UNION FITTING 1/8(PACK OF 10)
Brand: Imperial Model: 91108 Part Number: 91108
"IMPERIAL" PERMALIGN UNION FITTING
Tube Outside Diameter: 1/8
Cross Reference: 962A-2
PermalignTM fittings are versatile. Use them on copper, aluminum, and thermoplastic tubing.
Permalign fittings are 100% compatible with the standard compression fittings you are now using.
Reduce your labor costs! Installation time is cut by 40% over standard compression fittings, and 70% over SAE 45° flare fittings.
Reliability is increased because the design of Permalign fittings eliminate "sleeve cocking" and leakage, creating a more reliable connection.
The pressure rating of Permalign fittings are five to six times that of most standard compression fittings. They cover more than 70% of all fitting requirements (maximum working pressure = 3,000 psi). | *$55.69 |
| | IMPERIAL 90648 BULKHEAD COUPLING 3/416" (PACK OF 5)
Brand: Imperial Model: 90648 Part Number: 90648
"IMPERIAL" BULKHEAD COUPLING
Bulkhead Coupling.
Typical applications include: grease, instrumentation, and hydraulic systems.
Fair vibration resistance.
Temperature Range: -65° F. to 400°. F.
Material: Carbon steel - AISI/SAE 12L14
Plating: Zinc; yellow dichromate finish
Female Pipe Thread: 1/4"
Hex Nut Thread: 3/416"
Fixed Hex: 1"
Hex Nut: 15/16"
Inside Diameter: 0.422"
Panel Face To End Length: 1.25"
Overall Length: 1.50" | *$55.42 |
| | IMPERIAL 90588 BULKHEAD COUPLING 15/16" - BRASS (PACK OF 5)
Brand: Imperial Model: 90588 Part Number: 90588
"IMPERIAL" BULKHEAD COUPLING
Typical applications include: grease, instrumentation, and hydraulic systems.
Fair vibration resistance.
Temperature Range: -65° F. to 400°. F.
Material: Brass
Female Pipe Thread: 1/4"
Hex Nut Thread: 3/416"
Fixed Hex: 1"
Hex Nut: 15/16"
Inside Diameter: 0.422"
Panel Face To End Length: 1.25"
Overall Length: 1.50" | *$55.21 |
| IMPERIAL 91110 PERMALIGN UNION FITTING 1/4(PACK OF 10)
Brand: Imperial Model: 91110 Part Number: 91110
"IMPERIAL" PERMALIGN UNION FITTING
Tube Outside Diameter: 1/4
Cross Reference: 962A-4
PermalignTM fittings are versatile. Use them on copper, aluminum, and thermoplastic tubing.
Permalign fittings are 100% compatible with the standard compression fittings you are now using.
Reduce your labor costs! Installation time is cut by 40% over standard compression fittings, and 70% over SAE 45° flare fittings.
Reliability is increased because the design of Permalign fittings eliminate "sleeve cocking" and leakage, creating a more reliable connection.
The pressure rating of Permalign fittings are five to six times that of most standard compression fittings. They cover more than 70% of all fitting requirements (maximum working pressure = 3,000 psi). | *$52.89 |
| | Imperial 97017 High Pressure Steel Adaptor Bushing
Brand: Imperial Model: 97017 Part Number: 97017
Precision machined from AISI 12L14 carbon steel.
Compact size; excellent wrench pads.
Dryseal pipe threads.
Meets or exceeds all SAE standards.
Temperature Range: -65 F. to 400 F.
Pipe Thread: 2" - 11-1/2 thread x 1-1/4 - 11-1/2 thread | *$52.59 |
 | Imperial 93203 Coll-o-crimp 430 U Series Hose End
Brand: Imperial Model: 93203 Part Number: 93203
Plating: Zinc; yellow dichromate finish
Hose Inside Diameter: 1/2
Tube Size: 5/8
Thread Size: 7/8-14
Cut-Off Factor: 1.38
Cross Reference: 43008U-510
Must use special T-420 collets on the T-420 Coll-O-Crimp machine, no spacer ring required.
CAUTION: H430 U Series No-skive Hose Ends are designed for use with specific sizes and types of hose. | *$52.29 |
 | IMPERIAL 97403 HYDRAULIC QUICK COUPLER 1/2"
Brand: Imperial Model: 97403 Part Number: 97403
"IMPERIAL" HYDRAULIC QUICK COUPLER
Body Size: 1/2"
PSI: 4,000 lbs.
Cross Reference: H4-62
Pressure Ratings: ANSI/ISO.
Female Pipe Size: 1/2ndash14;
Temperature Range: -40° F. to 250° F.
Can be used with Hydraulic Quick Coupler Nipple, Part No. 97413
Vacuum Data: 27.4 inches Hg, both connected and disconnected.
This double shut-off coupling can be used anywhere fluid transfer lines
need to be connected and disconnected. | *$50.39 |
 | IMPERIAL 97459 DOUBLE SHUT-OFF HYDRAULIC COUPLER NIPPLE 1"
Brand: Imperial Model: 97459 Part Number: 97459
"IMPERIAL" HYDRAULIC COUPLER NIPPLE
Body Size: 1"
Female Thread: 1" NPTF
Tomco No.: PA5608-36
Parker No.: 6602-16-16
Aeroquip No.: 5602-16-16S
Double Shut-Off (ISO "A") Quick Coupler Nipple.
Shut-off valves on the nipple and coupler.
Interchangeability with other leading manufacturers.
Rated at a working pressure of 4,000 psi.
Temperature Range: -40° to 225° F.
Seals are made of Buna-N material.
Exceeds ISO 7241-1, series "A" specifications.
Hose protection is the result of swivel action allowed by the coupler.
Used with Double Shut-Off (ISO "A") Quick Coupler, Part No. 97452.
Positive alignment and even load distribution provided by the ball-locking mechanism. | *$50.29 |
 | IMPERIAL 97360 QUICK DISCONNECT COUPLER PLUG 1/4X1/4FNPT(PACK OF 2)
Brand: Imperial Model: 97360 Part Number: 97360
"IMPERIAL" QUICK DISCONNECT COUPLER PLUG
Body Style: 1/4"
Female NPT: 1/4"
Corrosion resistant finish.
Case hardened plugs.
Maximum Air Pressure: 300 psi
Heavy-duty quick disconnect coupler plugs.
Female Pipe Thread, Industrial Design.
Manufactured of high-grade alloy steel.
For low pressure pneumatic lines primarily used for air. | *$5.99 |
 | IMPERIAL 97740 "SERIES 320" HIGH FLOW COUPLER PLUG 1/4"NPT-MALE
Brand: Imperial Model: 97740 Part Number: 97740
"IMPERIAL" QUICK DISCONNECT COUPLER PLUG
Body Size: 1/4"
Male NPT: 1/4"
High flow design.
Flow Capacity: 74.3 CFM
Material: brass/steel.
Plating: Nickel
Coupler Plug Male Pipe Thread.
Maximum Working Pressure: 232 psi (16 bar)
Minimum Burst Pressure: 2030 psi (140 bar)
Male threads come with preapplied thread sealant.
Not interchangeable with any other system or design of couplers.
Heavy-duty quick disconnect coupler plugs high flow series 320 | *$5.99 |
 | IMPERIAL 99492 FOR-SEAL O-RING FOR FLAT FACE O-RING FITTING 1/2
Brand: Imperial Model: 99492 Part Number: 99492
"IMPERIAL" FOR-SEAL O-RING
Tube Outside Diameter: 1/2
Cross Reference: 4629 x 8
Excellent vibration resistance.
Fitting Sealing Method: O-Ring.
Quantity: 10 per package.
Material: Buna N 90 Durometer.
Maximum operating pressure to 6,000 psi.
For-Seal O-Ring for Flat Face O-Ring Fitting.
Temperature Range: -40° F. to 250° F. (-40° C. to 121° C.)
Typical Applications: High pressure hydraulic, pneumatic, and chemical processing. | *$5.99 |
 | IMPERIAL 97358 QUICK DISCONNECT COUPLER PLUG 1/2X1/2FNPT - TRU FLATE DESIGN
Brand: Imperial Model: 97358 Part Number: 97358
"IMPERIAL" QUICK DISCONNECT COUPLER PLUG
Body Style: 1/2"
Female NPT: 1/2"
Corrosion resistant finish.
Case hardened plugs.
Maximum Air Pressure: 300 psi
Manufactured of high-grade alloy steel.
Heavy-duty quick disconnect coupler body.
Protective collar ensures against accidental disconnect.
For low pressure pneumatic lines primarily used for air.
Body Female Pipe Thread, Automotive (Tru-Flate) Design. | *$5.89 |
 | IMPERIAL 90895 BULKHEAD COUPLING 13/16" (PACK OF 5)
Brand: Imperial Model: 90895 Part Number: 90895
"IMPERIAL" BULKHEAD COUPLING
Primary applications include: grease, instrumentation, and hydraulic systems.
Fair vibration resistance.
Temperature Range: -65° F to 400° F.
Material: carbon steel - AISI/SAE 12L14
Plating: zinc; yellow dichromate finish
Male Pipe Thread: 3/8"
Fixed Hex: 13/16"
Inside Diameter: 0.297"
Panel Face To End Length: 1.31"
Overall Length: 2.18"
Cross Reference: C5325x6 | *$49.86 |
| IMPERIAL 91109 PERMALIGN UNION FITTING 3/16(PACK OF 10)
Brand: Imperial Model: 91109 Part Number: 91109
"IMPERIAL" PERMALIGN UNION FITTING
Tube Outside Diameter: 3/16
Cross Reference: 962A-3
PermalignTM fittings are versatile. Use them on copper, aluminum, and thermoplastic tubing.
Permalign fittings are 100% compatible with the standard compression fittings you are now using.
Reduce your labor costs! Installation time is cut by 40% over standard compression fittings, and 70% over SAE 45° flare fittings.
Reliability is increased because the design of Permalign fittings eliminate "sleeve cocking" and leakage, creating a more reliable connection.
The pressure rating of Permalign fittings are five to six times that of most standard compression fittings. They cover more than 70% of all fitting requirements (maximum working pressure = 3,000 psi | *$49.79 |
 | IMPERIAL 97476 DOUBLE SHUT-OFF HYDRAULIC COUPLER 1/2" - BRASS
Brand: Imperial Model: 97476 Part Number: 97476
"IMPERIAL" ISO B HYDRAULIC COUPLER
Body Size: 1/2'
Female Thread: 1/2" NPTF
Tomco No.: TH4-26-002
Parker No.: BH4-60
Brass construction.
Aeroquip No.: FD45 1011-08-10
Double Shut-Off (ISO "B") Quick Coupler.
Shut-off valves on the nipple and coupler.
Interchangeability with other leading manufacturers.
Rated at a working pressure of 1,000 psi.
Temperature Range: -40° to 225° F.
Seals are made of Buna-N material.
Hose protection is the result of swivel action allowed by the coupler.
Used with Double Shut-Off (ISO "B") Quick Coupler Nipple, Part No. 97477
Positive alignment and even load distribution provided by the ball-locking mechanism. | *$49.29 |
| | IMPERIAL 90615 BULKHEAD COUPLING 1/2"x3/8" (PACK OF 2)
Brand: Imperial Model: 90615 Part Number: 90615
"IMPERIAL" BULKHEAD COUPLING
Typical applications include: grease, instrumentation and hydraulic systems.
Fair vibration resistance.
Temperature Range: -65° F. to 400° F.
Material: Carbon steel - ANSI/SAE 12L 14
Plating: zinc; yellow dichromate finish
Male Pipe Thread: 1/2"
Female Pipe Thread: 3/8"
Hex Nut Thread: 1-14"
Fixed Hex: 1-1/8"
Inside Diameter: 0.402"
Panel Face to End Length: 0.70"
Overall Length: 1.688" | *$48.57 |
| | IMPERIAL 90649 BULKHEAD COUPLING 15/16" (PACK OF 5)
Brand: Imperial Model: 90649 Part Number: 90649
"IMPERIAL" BULKHEAD COUPLING
Bulkhead Coupling.
Typical applications include: grease, instrumentation, and hydraulic systems.
Fair vibration resistance.
Temperature Range: -65° F. to 400°. F.
Material: Carbon steel - AISI/SAE 12L14
Plating: Zinc; yellow dichromate finish
Female Pipe Thread: 1/4"
Hex Nut Thread: 3/416"
Fixed Hex: 1"
Hex Nut: 15/16"
Inside Diameter: 0.422"
Panel Face To End Length: 0.69"
Overall Length: 0.94" | *$48.44 |
 | IMPERIAL 91950 #H03912 SUCTION HOSE 3/4x1-3/8" ID
Brand: Imperial Model: 91950 Part Number: 91950
"IMPERIAL" SUCTION HOSE
Hose ID: 3/4"
Hose OD: 1-3/8
Working pressure: 300 psi
Minimum burst pressure: 1200 psi
Minimum bend radius: 5"
Temperature range: -40° F to 212° F
Weatherhead cross reference: H03912
Use with U-Series or 430 U-Series.
Typical application: hydraulic suction hose.
Marine application J1942/1 hydraulic only, ABS and MSHA accepted.
Hose Construction: Inner Tube: nitrile blend,Cover: neoprene,Reinforcement:
3/4" to 1-1/2" - one helical cable wire and one fiber braid.
2" - one helical, straight-stranded wire and one fiber braid. | *$469.99 |
| IMPERIAL 97402 HYDRAULIC QUICK COUPLER 3/8"
Brand: Imperial Model: 97402 Part Number: 97402
"IMPERIAL" HYDRAULIC QUICK COUPLER
Body Size: 3/8"
PSI: 4,000 lbs.
Cross Reference: H3-62
Pressure Ratings: ANSI/ISO.
Female Pipe Size: 3/8ndash18;
Temperature Range: -40° F. to 250° F.
Can be used with Hydraulic Quick Coupler Nipple, Part No. #97412
Vacuum Data: 27.4 inches Hg, both connected and disconnected.
This double shut-off coupling can be used anywhere fluid transfer lines
need to be connected and disconnected. | *$46.69 |
| | IMPERIAL 96034 90° ELBOW SWIVEL ADAPTER - 1/2X3/4 (PACK OF 2)
Brand: Imperial Model: 96034 Part Number: 96034
"IMPERIAL" SWIVEL ADAPTER
Female Pipe Swivel to Male Pipe 90° Elbow Swivel Adapter Fitting.
Typical Application: Pressure hydraulic systems
Pressure: Up to 5,000 depending on size
Material: Carbon steel AISI/SAE12L14
Plating: Zinc; yellow dichromate finish
NPSM Swivel Nut: 1/214
Male Pipe Thread Size: 3/414
Cross Reference: 9405 x 8 x 12 | *$46.69 |
| | IMPERIAL 99405 FLAT FACE O-RING CAP FITTING 1"(PACK OF 2)
Brand: Imperial Model: 99405 Part Number: 99405
"IMPERIAL" O-RING CAP FITTING
Tube Outside Diameter: 3/4
For-Seal Thread Size: 1-7/1612
Cross Reference: 4129 x 16
Sealing Method: O-Ring
Material: 12L14 steel.
Excellent vibration resistance.
Maximum operating pressure to 6,000 psi.
Flat Face O-Ring Cap Fitting (Reference SAE No. 520112).
Typical Applications: High pressure hydraulic, pneumatic, and chemical processing. | *$46.19 |
 | IMPERIAL 90950 FLARE TUBE PLUG 3/8-24" (PACK OF 5)
Brand: Imperial Model: 90950 Part Number: 90950
"IMPERIAL" FLARE TUBE PLUG
45° Flare Tube Plug Fitting.
45° Flare Tube Fittings conform to ASA, ASME, SAE, and Mil. specifications
Good resistance to vibration. Use Long Nut in applications with severe vibration.
45° Flare Tube Fittings flare fittings are reusable.
Used with copper, brass, aluminum, and steel hydraulic tubing that can be flared.
Working pressure up to 2,000 psi, depending upon tubing being used. (Will withstand burst pressure up to 5,000 psi).
Temperature Range: -65° F. to 250° F. at maximum operating pressures.
Tube Outside Diameter: 3/16"
Thread Size: 3/8-24" | *$45.78 |
| | IMPERIAL 97366 MANIFOLD COUPLING 1/4"x1/4" NPT (PACK OF 2)
Brand: Imperial Model: 97366 Part Number: 97366
"IMPERIAL" MANIFOLD COUPLING
NPT: 1/4"x1/4"
Manifold Coupling increases number of air outlets without adding more air lines. | *$45.59 |
| | IMPERIAL 97367 MANIFOLD COUPLING 3/8"x1/4" NPT (PACK OF 2)
Brand: Imperial Model: 97367 Part Number: 97367
"IMPERIAL" MANIFOLD COUPLING
NPT: 3/8"x1/4"
Manifold Coupling increases number of air outlets without adding more air lines. | *$45.19 |
| | IMPERIAL 90922 REPLACEMENT MALE ELBOW FITTING 5/1624"x1/8" (PACK OF 5)
Brand: Imperial Model: 90922 Part Number: 90922
"IMPERIAL" MALE ELBOW FITTING
Replacement Male Elbow Fitting for Eaton and Fuller components.
Excellent vibration characteristics depend upon use of tubing.
Applications: air control systems, instrumentation, water, air, and lubrication lines.
All fittings have split sleeves.
Fitting is not DOT approved.
Temperature Range: -65° F. to 250° F.
Tube Size: 1/8"
Thread Size: 5/1624"
Pipe Thread: 1/16"
Cross Reference: 284 x 2 x 1 | *$44.26 |
 | IMPERIAL 99402 FLAT FACE O-RING CAP FITTING 1/2 (PACK OF 5)
Brand: Imperial Model: 99402 Part Number: 99402
"IMPERIAL" O-RING CAP FITTING
Tube Outside Diameter: 1/2
For-Seal Thread Size: 13/1616
Cross Reference: 4129 x 8
Sealing Method: O-Ring
Material: 12L14 steel.
Excellent vibration resistance.
Maximum operating pressure to 6,000 psi.
Flat Face O-Ring Cap Fitting (Reference SAE No. 520112).
Typical Applications: High pressure hydraulic, pneumatic, and chemical processing. | *$42.79 |
 | IMPERIAL 97368 QUICK DISCONNECT COUPLER 1/2x3/8FNPT - TRU FLATE DESIGN
Brand: Imperial Model: 97368 Part Number: 97368
"IMPERIAL" QUICK DISCONNECT COUPLER
Body Style: 1/2"
Female NPT: 3/8"
Corrosion resistant finish.
Stainless steel springs.
Maximum Air Pressure: 300 psi
Manufactured of high-grade alloy steel.
Protective collar ensures against accidental disconnect.
For low pressure pneumatic lines primarily used for air.
Body Female Pipe Thread, Industrial or Automotive (Tru-Flate) Design. | *$41.59 |
| | IMPERIAL 90921 REPLACEMENT MALE ELBOW FITTING 5/1624" (PACK OF 5)
Brand: Imperial Model: 90921 Part Number: 90921
"IMPERIAL" MALE ELBOW FITTING
Replacement Male Elbow Fitting for Eaton and Fuller components.
Excellent vibration characteristics depend upon use of tubing.
Applications: air control systems, instrumentation, water, air, and lubrication lines.
All fittings have split sleeves.
Fitting is not DOT approved.
Temperature Range: -65° F. to 250° F.
Tube Size: 1/8"
Thread Size: 5/1624"
Pipe Thread: 1/8"
Cross Reference: 284 x 2 | *$41.35 |
| | IMPERIAL 99454 FLAT FACE O-RING STRAIGHT THREAD CONNECTOR FITTING 1"X1"(PACK OF 2)
Brand: Imperial Model: 99454 Part Number: 99454
IMPERIAL" FLAT FACE O-RING MALE ADAPTOR
Port Thread: 1"
Material: 12L14 steel.
Sealing Method: O-ring.
Cross Reference: 4315 x 16
Tube Outside Diameter: 1"
Vibration: Excellent resistance.
For-Seal Thread Size: 1-7/1612
Pressure: Operating pressure to 6,000 psi
Typical Application: High pressure hydraulic, pneumatic, and chemical processing. | *$41.29 |
| IMPERIAL 97381 QUICK DISCONNECT COUPLER PLUG 1/4x1/4FNPT - TRU FLATE DESIGN (PACK OF 2)
Brand: Imperial Model: 97381 Part Number: 97381
"IMPERIAL" QUICK DISCONNECT COUPLER PLUG
Body Style: 1/2"
Female NPT: 1/2"
Corrosion resistant finish.
Case hardened plugs.
Maximum Air Pressure: 300 psi
Manufactured of high-grade alloy steel.
Heavy-duty quick disconnect coupler body.
Protective collar ensures against accidental disconnect.
For low pressure pneumatic lines primarily used for air.
Body Female Pipe Thread, Automotive (Tru-Flate) Design. | *$4.99 |
 | IMPERIAL 97384 QUICK DISCONNECT COUPLER PLUG 1/4x1/4MNPT - ARO DESIGN(PACK OF 2)
Brand: Imperial Model: 97384 Part Number: 97384
"IMPERIAL" QUICK DISCONNECT COUPLER PLUG
Body Style: 1/4"
Male NPT: 1/4"
Case hardened plugs.
Corrosion resistant finish.
Maximum Air Pressure: 300 psi
Male Pipe Thread, ARO Design.
Manufactured of high-grade alloy steel.
Heavy-duty quick disconnect Male coupler body.
For low pressure pneumatic lines primarily used for air. | *$4.89 |
 | IMPERIAL 97361 QUICK DISCONNECT COUPLER PLUG 1/4"x1/4"MNPT(PACK OF 2)
Brand: Imperial Model: 97361 Part Number: 97361
"IMPERIAL" QUICK DISCONNECT COUPLER PLUG
Body Style: 1/4"
Male NPT: 1/4"
Corrosion resistant finish.
Case hardened plugs.
Maximum Air Pressure: 300 psi
Heavy-duty quick disconnect coupler plugs.
Male Pipe Thread, Industrial Design.
Manufactured of high-grade alloy steel.
For low pressure pneumatic lines primarily used for air. | *$4.89 |
| IMPERIAL 99491 FOR-SEAL O-RING FOR FLAT FACE O-RING FITTING 3/8
Brand: Imperial Model: 99491 Part Number: 99491
"IMPERIAL" FOR-SEAL O-RING
Tube Outside Diameter: 3/8
Cross Reference: 4629 x 6
Excellent vibration resistance.
Fitting Sealing Method: O-Ring.
Quantity: 10 per package.
Material: Buna N 90 Durometer.
Maximum operating pressure to 6,000 psi.
For-Seal O-Ring for Flat Face O-Ring Fitting.
Temperature Range: -40° F. to 250° F. (-40° C. to 121° C.)
Typical Applications: High pressure hydraulic, pneumatic, and chemical processing. | *$4.89 |
 | IMPERIAL 97382 QUICK DISCONNECT COUPLER PLUG 1/4x1/4MNPT - TRU FLATE DESIGN(PACK OF 2)
Brand: Imperial Model: 97382 Part Number: 97382
"IMPERIAL" QUICK DISCONNECT COUPLER PLUG
Body Style: 1/4"
Male NPT: 1/4"
Case hardened plugs.
Corrosion resistant finish.
Maximum Air Pressure: 300 psi
Male Pipe Thread, Automotive (Tru-Flate) Design.
Manufactured of high-grade alloy steel.
Heavy-duty quick disconnect Male coupler body.
For low pressure pneumatic lines primarily used for air. | *$4.89 |
 | IMPERIAL 97383 QUICK DISCONNECT COUPLER PLUG 1/4x1/4FNPT - ARO DESIGN(PACK OF 2)
Brand: Imperial Model: 97383 Part Number: 97383
"IMPERIAL" QUICK DISCONNECT COUPLER PLUG
Body Style: 1/4"
Female NPT: 1/4"
Case hardened plugs.
Corrosion resistant finish.
Maximum Air Pressure: 300 psi
Female Pipe Thread, ARO Design.
Manufactured of high-grade alloy steel.
Heavy-duty quick disconnect Male coupler body.
For low pressure pneumatic lines primarily used for air. | *$4.79 |
 | IMPERIAL 93413 #H56908 HYDRAULIC HOSE 13/32" - 50' LENGTH
Brand: Imperial Model: 93413 Part Number: 93413
"IMPERIAL" HYDRAULIC HOSE
Hose ID: 13/32"
Hose OD: 49/64"
Hose Lengh: 50 feet.
Minimum Bend Radius: 4-5/8"
Cross Reference: H56908
ABS approved sizes for 5/16" to 1-1/8".
Maximum Working Pressure: 2000 psi
Minimum Burst Pressure: 8000 psi
SAE 100R5, SAE J1402 Type All, DOT A11*, ABS (*Air brake applications limited to sizes -04 through -12)
Temperature range:(hydraulic fluid: -55° F to 302° F,Air brake: -40° F to 200° F,Air: -40° F to 212° F
Hose Construction:(Inner tube: CPE,Cover: fiber braid,Reinforcement: two fiber braids and one steel braid).
Applications: general purpose truck, marine, and hydraulic hose. For air brake (4-12), diesel fuel, grease lines, high temp. petroleum oils and medium pressure hydraulic applications. | *$392.19 |
 | IMPERIAL 192078 "METRIC" PUSH-TO-CONNECT AIR BRAKE FITTING M22x12MMx1.5" (PACK OF 5)
Brand: Imperial Model: 192078 Part Number: 192078
"IMPERIAL" AIR BRAKE FITTING
Patented design of sizes 6MM ABD above to meet DIN 74324 AND D.O.T. FMVSS 571.106 air brake performance specifications.
Features all brass body and stainless steel tube support.
Working pressure up to 250 PSI.
Working temperature from -40° to +200° Fahrenheit.
12MM tube x M22 X 1.5 metric thread - male elbow.
"IMPERIAL" AIR BRAKE FITTING
Patented design of sizes 6MM ABD above to meet DIN 74324 AND D.O.T. FMVSS 571.106 air brake performance specifications.
Features all brass body and stainless steel tube support.
Working pressure up to 250 PSI.
Working temperature from -40° to +200° Fahrenheit.
12MM tube x M22 X 1.5 metric thread - male elbow. | *$385.99 |
 | IMPERIAL 97416 TEST PORT COUPLER 1/8"x1/8-27" (PACK OF 5)
Brand: Imperial Model: 97416 Part Number: 97416
"IMPERIAL" TEST PORT COUPLER
Body Size: 1/8
Female Thread: 1/827
Overall Length: 1.67
Test Port Coupler.
Cross Reference: PD222 | *$384.19 |
 | IMPERIAL 99463 FLAT FACE O-RING MALE CONNECTOR FITTING 5/8X1/2(PACK OF 2)
Brand: Imperial Model: 99463 Part Number: 99463
"IMPERIAL" FLAT FACE O-RING MALE ADAPTOR
Male Pipe Size: 1/2"
Material: 12L14 steel.
Sealing Method: O-Ring
Excellent vibration resistance.
Cross Reference: 4205 x 10
Tube Outside Diameter: 5/8"
Maximum operating pressure to 6,000 psi.
Typical Applications: High pressure hydraulic, pneumatic, and chemical processing. | *$38.59 |
 | IMPERIAL 97452 DOUBLE SHUT-OFF HYDRAULIC COUPLER 1/2"
Brand: Imperial Model: 97452 Part Number: 97452
"IMPERIAL" ISO A HYDRAULIC COUPLER
Body Size: 1/2
Female Thread: 1/2 NPTF
Tomco No.: CA5604-26
Parker No.: 6601-8-10
Rated at a working pressure of 4,000 psi.
Temperature Range: -40° to 225° F.
Seals are made of Buna-N material.
Aeroquip No.: 5601-8-10S
Double Shut-Off (ISO "A") Quick Coupler.
Exceeds ISO 7241-1, series "A" specifications.
Shut-off valves on the nipple and coupler.
Interchangeability with other leading manufacturers.
Hose protection is the result of swivel action allowed by the coupler.
Used with Double Shut-Off (ISO "A") Quick Coupler Nipple, Part No. 97453.
Positive alignment and even load distribution provided by the ball-locking mechanism. | *$38.49 |
| IMPERIAL 192069 "METRIC" PUSH-TO-CONNECT AIR BRAKE FITTING M22x6MMx1.5" (PACK OF 5)
Brand: Imperial Model: 192069 Part Number: 192069
"IMPERIAL" AIR BRAKE FITTING
Patenated design of sizes 6MM ABD above to meet DIN 74324 and D.O.T. FMVSS 571.106 air brake performance specifications.
Features all brass body and stainless steel tube support.
Working pressure up to 250 PSI.
Working temperature from -40° to +200° farinhite.
6MM tube M22 X 1.5 metric thread - male elbow. | *$375.99 |
| | IMPERIAL 99415 FLAT FACE O-RING PLUG FITTING 1"(PACK OF 2)
Brand: Imperial Model: 99415 Part Number: 99415
"IMPERIAL" O-RING PLUG FITTING
Tube Outside Diameter: 1"
For-Seal Thread Size: 1-7/1612
Cross Reference: 4229 x 16
Sealing Method: O-Ring
Material: 12L14 steel.
Excellent vibration resistance.
Maximum operating pressure to 6,000 psi.
Flat Face O-Ring Plug Fitting (Reference SAE No. 520109)
Typical Applications: High pressure hydraulic, pneumatic, and chemical processing. | *$37.89 |
| IMPERIAL 192073 "METRIC" PUSH-TO-CONNECT AIR BRAKE FITTING M22x8MMx1.5" (PACK OF 5)
Brand: Imperial Model: 192073 Part Number: 192073
"IMPERIAL" AIR BRAKE FITTING
Patented design of sizes 6MM ABD above to meet DIN 74324 AND D.O.T. FMVSS 571.106 air brake performance specifications.
Features all brass body and stainless steel tube support.
Working pressure up to 250 PSI.
Working temperature from -40° to +200° Fahrenheit.
8MM tube x M22 X 1.5 metric thread - male elbow. | *$360.99 |
 | IMPERIAL 97423 MILTON QUICK INDUSTRIAL COUPLER 1/4"x1/4"FNPT(PACK OF 2)
Brand: Imperial Model: 97423 Part Number: 97423
"IMPERIAL" MILTON QUICK INDUSTRIAL COUPLER
Body Style: 1/4"
Female NPT: 1/4"
Corrosion resistant finish.
Stainless steel springs.
Maximum Air Pressure: 300 psi
Heavy-duty quick disconnect coupler body.
Female Pipe Thread, Industrial Design.
Manufactured of high-grade alloy steel.
Protective collar ensures against accidental disconnect.
For low pressure pneumatic lines primarily used for air. | *$36.19 |
 | IMPERIAL 97424 "MILTON" QUICK INDUSTRIAL COUPLER 1/4"x1/4"MNPT(PACK OF 2)
Brand: Imperial Model: 97424 Part Number: 97424
"IMPERIAL" MILTON QUICK INDUSTRIAL COUPLER
Body Style: 1/4"
Female NPT: 1/4"
Corrosion resistant finish.
Stainless steel springs.
Maximum Air Pressure: 300 psi
Manufactured of high-grade alloy steel.
Protective collar ensures against accidental disconnect.
For low pressure pneumatic lines primarily used for air. | *$36.19 |
| IMPERIAL 192072 "METRIC" PUSH-TO-CONNECT AIR BRAKE FITTING M16x8MMx1.5" (PACK OF 5)
Brand: Imperial Model: 192072 Part Number: 192072
"IMPERIAL" AIR BRAKE FITTING
Patented design of sizes 6MM ABD above to meet DIN 74324 AND D.O.T. FVSS 571.106 air brake performance specifications.
Features all brass body and stainless steel tube support.
Working pressure up to 250 PSI.
Working temperature from -40° to +200° Fahrenheit.
8MM tube x M16 X 1.5 metric thread - male elbow. | *$357.99 |
| IMPERIAL 192071 "METRIC" PUSH-TO-CONNECT AIR BRAKE FITTING M14x8MMx1.5" (PACK OF 5)
Brand: Imperial Model: 192071 Part Number: 192071
"IMPERIAL" AIR BRAKE FITTING
Patented design of sizes 6MM ABD above to meet DIN 74324 AND D.O.T. FMVSS 571.106 air brake performance specifications.
Features all brass body and stainless steel tube support.
Working pressure up to 250 PSI.
Working temperature from -40° to +200° Fahrenheit.
8MM tube x M14 X 1.5 metric thread - male elbow. | *$356.99 |
| IMPERIAL 93410 #H56904 HYDRAULIC HOSE - 3/16"
Brand: Imperial Model: 93410 Part Number: 93410
"IMPERIAL" HYDRAULIC HOSE
Hose ID: 3/16"
Hose OD: 33/64"
Hose Lengh: 50 feet.
Minimum Bend Radius: 3"
Cross Reference: H56904
ABS approved sizes for 5/16" to 1-1/8".
Maximum Working Pressure: 3000 psi
Minimum Burst Pressure: 12000 psi
SAE 100R5, SAE J1402 Type All, DOT A11*, ABS (*Air brake applications limited to sizes -04 through -12)
Temperature range:(hydraulic fluid: -55° F to 302° F,Air brake: -40° F to 200° F,Air: -40° F to 212° F
Hose Construction:(Inner tube: CPE,Cover: fiber braid,Reinforcement: two fiber braids and one steel braid).
Applications: general purpose truck, marine, and hydraulic hose. For air brake (4-12), diesel fuel, grease lines, high temp. petroleum oils and medium pressure hydraulic applications. | *$355.89 |
