 | C.R. LAURENCE LCS3084 CRL 360 Degree Rotary Work Table
Brand: C.R. Laurence Part Number: LCS3084
Eliminates Production Steps 2' x 3' (61 cm x 91 cm) Carpeted Surface Holds Units up to 5' x 7' (152 cm x 213 cm) The CRL Rotary Work Table speeds production of Insulating Glass units while creating a safer work place. The glass is held in position by a 6 inch (152 millimeter) vacuum cup on a 2 x 3 foot (61 cm x 91 cm) carpeted surface. Vacuum Cup system is powered by a continuous flow vacuum generator which requires a 35 psi air supply (not supplied) regulated at the table and a 360 degree air driven braking system to stop and hold table in any rotational position. Both the vacuum hold down and braking systems are controlled via tandem foot pedal controls. Swing out support arms expand the top surface to 5 x 7 feet (1,524 x 2,133 millimeters). Work surface height is 36 inches (914 millimeters). Call your CRL Representative or contact us at with additional questions. Always wear the proper protective safety gear including gloves and arm guards when handling glass. | *$2,558.37 |
 | C.R. LAURENCE 2622300 CRL/Somaca 106 Wet Abrasive Belt Machine With 3M Platen
Brand: C.R. Laurence Part Number: 2622300
Rough Grinding, Smoothing and Polishing Edges of Glass For Use with 4" x 106" Belts Added Operator Protection Standard Safety Shield Operates on 110 Volts AC There are some quality products that never really get old they just get better as the years pass. This is the case for the world famous Somaca 106" Belt Machine. It's a machine that has been the workhorse and mainstay for most glass shops in the U.S., Canada and throughout the world. Width: 24 in (610 mm) Depth: 23 in (584 mm) Height: 72 in (1829 mm) Additional Product Information: Since 1932, glassworkers have learned to rely on the 106" to fulfill their glass grinding and polishing requirements. Reliability, versatility and durability are the words that best describe this renowned machine. A machine that has been made with pride by American craftsmen for over 70 years, using American-made components. Major Features of the 106 SPECIFICATIONS 106" Abrasive Belt Machine Abrasive Belts This machine uses standard 4" x 106" abrasive belts. One 120 grit belt (CRL4X106120X), one pair of safety glasses, and one approved respirator, (ES8710), are furnished with each machine. A safety shield is mounted to the hood. Motor 1HP, 110/220 volt, 60 cycle, single phase, 3450 RPM, capacitor-type wired to toggle switch, cord and plug. All machines are wired for 110 volts unless otherwise specified. Pulleys (Idler and Driven) 5" diameter, cast iron, machine trued and balanced. Belt Tension Device Eccentric type with locking handle, and control knob for tracking. Platens Available (Choice of One) A. Rubber Contact Platen with 24" long glass rest and five 3" dia. wheels. (2625587). B. 3M Flat Metal Cushioned Platen (optional). (2626674). C. 3M Replacement Pad. (2620099). D. Double Roller (optional). (2628442). Bearings Sealed standard ball bearings throughout in cast iron housings. Coolant System Water line with solenoid | *$2,416.12 |
 | C.R. LAURENCE BM64B CRL/Somaca 4 x 64 Upright Belt Machine
Brand: C.R. Laurence Part Number: BM64B
Portable Wet Abrasive Belt Model for Rough Grinding, Smoothing and Polishing Edges of Glass This bench type machine with its streamline styling, rugged construction and low price is ideal for glass fabricators who have only a limited need for edgework capacity. Also, it can be carried on a truck, or to the job site if electricity is available. Machine is designed for use with standard 4 x 64 inch (101.6 x 1625.6 millimeters) abrasive belts. One 120 grit belt is furnished with each unit. The machine is equipped with a 1/2HP, single phase, 1725 rpm motor with a cord and on/off switch. The drive shaft is V-belt powered, and revolves in two ball bearing pillow block units. The eccentric type belt tensioner has a convenient locking handle and a control knob for easy tightening and tracking. Water for wet grinding sprays on the back of the belt from a built-in tank. One pair of safety glasses and a respirator are furnished with each machine. Height: 36 in (914 mm) Depth: 24 in (610 mm) Width: 16 in (406 mm) | *$2,057.64 |
 | C.R. LAURENCE 6105GL CRL One Gallon Glas-Grind
Brand: C.R. Laurence Part Number: 6105GL
Excellent Quality Coolant for Glass Drilling, Sawing or Beveling This CRL GlassGrind Coolant is developed to provide excellent results for edging, beveling, drilling, sawing and other abrasive working of glass. Specifically designed for the glass industry, GlassGrind will not harden in the bottom of tanks like other coolants. | *$197.04 |
 | C.R. LAURENCE CN0004 CRL 115 Volt Solenoid for the GL4W or CN4106 Sander
Brand: C.R. Laurence Part Number: CN0004
Easy to Replace Designed for the GL4W/CN4106 Sanders This CRL 115 Volt Solenoid is designed to fit the GL4W or CN4106 (Canadian Model) upright sander as an O.E.M replacement part. It can easily be replaced with common hand tools. Safety Note: Always unplug sander before attempting to replace any parts. | *$195.81 |
 | CRL 62" Replacement Diamond Coated Blade - DTB5000
Brand: C.R. Laurence Part Number: DTB101
For CRL Diamond Laser Band Saw This CRL Diamond Coated Replacement Blade is designed for use on the CRL DTB5000 Diamond Laser Band Saw . | *$193.16 |
 | C.R. LAURENCE 0377006 CRL Panther Edger Front Oil Seal
Brand: C.R. Laurence Part Number: 0377006
Designed for CRL's Panther Edger This CRL Panther Edger Front Oil Seal is used with the CRL Panther Glass Edger. It keeps out contaminants such as dirt and water from the spindle shaft. Replacing this seal should be done by a qualified person who has previous experience with repairing machinery. Minimum Order: 1 Each | *$19.22 |
 | C.R. LAURENCE BP2001 CRL Bar Platen for the 2200 and 2200RP
Brand: C.R. Laurence Part Number: BP2001
Fits Behind Belt Gives Glass a Slightly Rounded Edge This CRL Bar Platen is used behind the belt to give glass a slightly rounded edge. Must be inserted into PA100 Platen Adapter located on your Upright Belt Sander . | *$186.43 |
 | CRL 1/8 to 1/2" Replacement Track Set
Brand: C.R. Laurence Part Number: 0378816
Used on the CRL Panther Edger This CRL Replacement Track Set allows you to replace worn tracks or simply have tracks which accommodate 1/8 to 1/2 inch (3.2 to 12.7 millimeter) glass in your CRL Panther Edger . Two 5 foot (1.5 meter) sections of high impact plastic track for 1/8, 3/16, 1/4, 3/8 and 1/2 inch (3, 5, 6, 9, 12 millimeter) glass are included in each set. | *$185.83 |
 | C.R. LAURENCE EZE942G CRL E-Z Edgerâ„¢ 1/2 Glass Polishing Wheel
Brand: C.R. Laurence Part Number: EZE942G
C.R. LAURENCE EZE942G CRL E-Z Edgerâ„¢ 1/2 Glass Polishing Wheel. This wheel is used on the CRL E-Z Edger for polishing glass circles. The wheel material will leave you with a smooth polished finish. CRL Polishing Wheels should never be run dry. A proper water/coolant mixture is needed to keep your wheel in optimum operating conditions. This wheel is softer than its diamond counterpart, therefore it will wear faster.. | *$185.22 |
 | C.R. LAURENCE FP2002 CRL Flat Platen
Brand: C.R. Laurence Part Number: FP2002
Fits Behind Belt Gives Glass a Flat Edge A CRL Flat Platen is used behind the belt to give glass a flat edge. For use on CRL 2200 Series and 100BM Sanders. Must be inserted into a CRL Platen Adapter on older models not equipped with mounting holes. | *$183.44 |
 | C.R. LAURENCE 30189700 CRL/Somaca Bearing Housing for BM106G Machine
Brand: C.R. Laurence Part Number: 30189700
Replacement Part for BM106G Wet Abrasive Upright Sander This part is for all (1987 to present) BM106G Wet Abrasive Belt Machines. Item Number on Schematic: 20 Quantity Required Per Machine: 1 | *$180.22 |
 | C.R. LAURENCE CN0026 CRL Front Rest Roller Axle for the GL4W or CN4106 Sander
Brand: C.R. Laurence Part Number: CN0026
Designed for CRL GL4W/CN4106 Sanders This CRL Front Rest Roller Axle is designed to fit the CRL GL4W or CN4106 (Canadian Model) upright sander as an O.E.M replacement part. It can easily be replaced with common hand tools. | *$18.65 |
 | C.R. LAURENCE 2200720 CRL Single Spray Nozzle for 2200RP
Brand: C.R. Laurence Part Number: 2200720
Used on All 2200 Series Belt Sanders This CRL Water Spray Nozzle is used on all model 2200 and 2200RP wet belt sanders. Sprays belt with water to cut faster and cooler, reduce belt wear and eliminate sanding dust. Spray nozzle is also used on model 100BM belt sander. | *$18.30 |
 | C.R. LAURENCE 0377032 CRL Panther Edger Idler Gear
Brand: C.R. Laurence Part Number: 0377032
Designed for use with CRL's Panther Edger This CRL Idler Gear is used for guiding the drive belt and to make it track correctly, by keeping the proper tension. Gear is made from rolled steel and rides on a bearing. Used on the CRL Panther Edger . | *$178.06 |
 | C.R. LAURENCE EZE942E CRL E-Z Edgerâ„¢ 3/8 Glass Polishing Wheel
Brand: C.R. Laurence Part Number: EZE942E
C.R. LAURENCE EZE942E CRL E-Z Edgerâ„¢ 3/8 Glass Polishing Wheel. This CRL Glass Polishing Wheel wheel is used on the CRL EZ Edger for polishing glass circles. The wheel material will leave you with a smooth, polished finish. CRL Polishing Wheels should never be run dry. The proper coolant mixture is needed to keep your wheel in optimum operating conditions. This wheel is softer than its diamond counterpart, therefore it will wear faster.. | *$173.93 |
 | C.R. LAURENCE CN0038 CRL Bottom Bracket and Bearing for the GL4W or CN4106 Sander
Brand: C.R. Laurence Part Number: CN0038
Designed for CRL GL4W/CN4106 Sanders This CRL Bottom Bracket and Bearing is designed to fit the CRL GL4W or CN4106 (Canadian Model) upright sander as an O.E.M replacement part. It can easily be replaced with common hand tools. | *$170.50 |
 | C.R. LAURENCE 36957500 CRL/Somaca Junction Box for BM106G Machine
Brand: C.R. Laurence Part Number: 36957500
Replacement Part for BM106G Wet Abrasive Upright Sander This part is for all (1987 to present) BM106G Wet Abrasive Belt Machines. Item Number on Schematic: 62 Quantity Required Per Machine: 1 | *$17.44 |
 | C.R. LAURENCE 35667200 CRL/Somaca Bearing Cap for BM106G Machine
Brand: C.R. Laurence Part Number: 35667200
Replacement Part for BM106G Wet Abrasive Upright Sander This part is for all (1987 to present) BM106G Wet Abrasive Belt Machines. Item Number on Schematic: 9 Quantity Required Per Machine: 1 | *$17.15 |
 | C.R. LAURENCE 38779401 Somaca/CRL VE4 Glass Polish/Spindle 3 for 1/4 to 3/4 Glass
Brand: C.R. Laurence Part Number: 38779401
9R Grit Somaca/CRL VE4 Glass Polish/Spindle 3 are available for 1/4 to 3/4 inch (6 to 19 millimeter) thick glass and 3/8 to 3/4 inch (10 to 19 millimeter) thick glass. Dimensions: 8 in (203.2 mm) | *$169.90 |
 | C.R. LAURENCE 30189200 CRL/Somaca Upper Pulley for BM106G Machine
Brand: C.R. Laurence Part Number: 30189200
Replacement Part for BM106G Wet Abrasive Upright Sander This part is for all (1987 to present) BM106G Wet Abrasive Belt Machines. Item Number on Schematic: 45 Quantity Required Per Machine: 1 | *$168.41 |
 | C.R. LAURENCE EZE942C CRL E-Z Edgerâ„¢ 1/4 Glass Polishing Wheel
Brand: C.R. Laurence Part Number: EZE942C
Used Exclusively for the E-Z Edgerâ„¢ This CRL E-Z Edgerâ„¢ Polishing Wheel is used on CRL E-Z Edger Polishing Machines for the polishing of circular glass. Use CRL Sharpening Stones to remove any type of glaze and to expose fresh diamonds on your wheels. | *$166.42 |
 | C.R. LAURENCE 2623518 CRL 10 Glastar Tri-Star Saw and Blade
Brand: C.R. Laurence Part Number: 2623518
Three Functions In One Tool This CRL Glastar Tri-Star 8" Glass Grinder and 10" Saw is a versatile tool that enables you to do three jobs. On the left side you can mount a diamond glass grinding wheel up to eight inches (203.2 millimeters) in diameter. On the right side, you can mount an 8 inch (203.2 millimeter) grinding disc or felt polishing wheel. And for glass cutting, a 10 inch (254 millimeter) saw blade can be mounted, along with the table attachment. The machine is furnished with four miter guides. Wheels, discs, blades and saw table must be ordered separately. DIMENSIONS: 20 L x 12 D x 10 H inches (508 x 304.8 x 254 millimeters) F.O.B : Los Angeles, Ca. | *$164.14 |
 | C.R. LAURENCE PAE200 CRL Platen Adapter Extension
Brand: C.R. Laurence Part Number: PAE200
Use in Conjunction with PA100 to Create a Double Roller Platen Assembly for 100BM or 2200RP Sanders This CRL Platen Adapter Extension bolts to the top of the Platen Adapter to hold a second roller platen behind belt. | *$163.20 |
 | C.R. LAURENCE CRP6 CRL Front Rest Replacement Roller for the 200 Sander
Brand: C.R. Laurence Part Number: CRP6
Used on the No. 200 Sander This CRL Front Rest Replacement Roller is used on the Model 200 Sander. The front rest roller and axle with grease fitting supports glass during sanding. Roller and axle may also be used on some Somaca sanders. | *$16.78 |
 | C.R. LAURENCE 37028600 CRL/Somaca Electric Junction Box Cover for BM106G Machine
Brand: C.R. Laurence Part Number: 37028600
Replacement Part for BM106G Wet Abrasive Upright Sander This part is for all (1987 to present) BM106G Wet Abrasive Belt Machines. Item Number on Schematic: 63 Quantity Required Per Machine: 1 | *$16.62 |
 | C.R. LAURENCE 3688106 Somaca/CRL Pumice Block
Brand: C.R. Laurence Part Number: 3688106
4" x 2-1/4" x 2-1/2" This Somaca/CRL Pumice Block is used to redress Diamond Wheels to keep them in top operating condition. | *$16.22 |
 | CRL 3" Front Rest Roller for the GL4W or CN4106 Sander
Brand: C.R. Laurence Part Number: CN0025
Front Rest Roller Designed for CRL GL4W/CN4106 Sanders This CRL 3" Front Rest Roller is designed to fit the CRL GL4W or CN4106 (Canadian Model) upright sander as an O.E.M replacement part. It can easily be replaced with common hand tools | *$16.15 |
 | C.R. LAURENCE 35587400 CRL/Somaca Roller Support Frame for BM106G Machine
Brand: C.R. Laurence Part Number: 35587400
Replacement Part for BM106G Wet Abrasive Upright Sander This part is for all (1987 to present) BM106G Wet Abrasive Belt Machines. Item Number on Schematic: 4 Quantity Required Per Machine: 1 | *$157.84 |
 | C.R. LAURENCE 20040 CRL Upper Pulley for the 200 and 2000 Sander
Brand: C.R. Laurence Part Number: 20040
Fits All 200 2000 Belt Machines This cast iron CRL Upper Pulley is to be used in conjunction with two 1100KR bearings on the 200 and 2000 Series Sanders. | *$154.10 |
 | C.R. LAURENCE 2200SS CRL Belt Guard Safety Shield for the 2200, 2200RP and AU22 Upright Belt Sander
Brand: C.R. Laurence Part Number: 2200SS
Gives Added Protection for the Operator O.S.H.A. Recommended Easy Bolt-On Installation to Your Existing 2200RP, 2200 or AU22 Upright Wet Belt Sander The CRL Belt Guard Safety Shield for the 2200, 200RP and AU22 Upright Belt Sander protects your face and eyes from flying debris, giving you an added degree of safety. The 2200SS is standard equipment on the new CRL 2200 , CRL 2200RP and CRL AU22 Sanders. It can also be retro-fitted on older 2200, 2200RP and AU22 Model Sanders. For safety, this is an attachment no shop should be without. This new addition to our line of sanders offers the piece of mind you need when working with power tools such as the 2200, 2200RP and AU22 Upright Sanders. One each per package. Follow all safety precautions when operating machinery. Failure to do so can result in injury. Height: 18 in (457.2 mm) Width: 6 in (152.4 mm) | *$152.79 |
 | C.R. LAURENCE 2622028 CRL Upper / Lower Pulley for Specific Model Somaca Sanders
Brand: C.R. Laurence Part Number: 2622028
Upper Pulley for Model 106C, 1968 Thru 1983 This Replacement Pulley is a Upper Pulley for Model 106C 1968 Thru 1983, and Lower Pulley for All Models of 106 Series Sanders. | *$152.08 |
 | C.R. LAURENCE 2621066 CRL Upper Pulley for 106FB and 106E G Somaca Sanders
Brand: C.R. Laurence Part Number: 2621066
Series 106 Sanders This Replacement Upper Pulley fits 106FB and 106E G Models of 106 Series Sanders. | *$151.78 |
 | C.R. LAURENCE 30016600 CRL/Somaca Lower Pulley for BM106G Machine
Brand: C.R. Laurence Part Number: 30016600
Replacement Part for BM106G Wet Abrasive Upright Sander This part is for all (1987 to present) BM106G Wet Abrasive Belt Machines. Item Number on Schematic: 58 Quantity Required Per Machine: 1 | *$151.73 |
 | CRL 14" x 5/8" Replacement Grinding Wheel
Brand: C.R. Laurence Part Number: BW14
Used on CRL Finger Pull Machines The CRL Finger Pull Machine uses this Replacement Grinding Wheel for cutting grooves in glass. Easily replaced with simple hand tools. Can be used on either the FP1 or the old style FP514 Finger Pull Machine. | *$150.64 |
 | C.R. LAURENCE 33986 CRL 8 Plain Steel Disc
Brand: C.R. Laurence Part Number: 33986
C.R. LAURENCE 33986 CRL 8 Plain Steel Disc. Used on the CRL Glastar Studio Beveling System, this plain CRL Steel Disc functions as a backing plate only. Four different types of finishing pads mount to this steel plate with pressure sensitive adhesive. The system is supplied with four steel discs, many shops keep extra discs around for their extra diamond pads.. | *$15.86 |
 | Somaca/CRL Grease Fitting Alemite No. 1743B and Shoulder Screw for BM106G Machine
Brand: C.R. Laurence Part Number: 36988803
Replacement Part for BM106G Wet Abrasive Upright Sander This part is for all (1987 to present) BM106G Wet Abrasive Belt Machines. Item Number on Schematic: 12 Quantity Required Per Machine: 5 | *$15.71 |
 | C.R. LAURENCE 46202278 CRL/Somaca Replacement Smoother for 38803800 Assembly
Brand: C.R. Laurence Part Number: 46202278
Replacement Rubber Smoother for Cat. No. 38803800 Somaca/CRL SBE1 Grinding Wheels are available in 46, 60, 100, 120, 140, 170, 230, and 270 grits for glass up to 1 inch (25 millimeter) thick. | *$145.36 |
 | C.R. LAURENCE 39579801 Somaca/CRL VE2/VE2Plus2/VE4 Orange Polishing Wheel for 1/8 to 1/2 Glass- 3-1/2 I.D.
Brand: C.R. Laurence Part Number: 39579801
120 Grit Somaca/CRL Polishing Wheels are 120 Grit and are available for 1/8 to 1/2 inch (3 to 12 millimeter) thick glass. Dimensions: 8 x 3/4 in (203.2 x 19 mm) Color: Orange | *$144.75 |
 | C.R. LAURENCE 2200750 CRL Replacement Pulley Shaft With C-Rings for 2200 Series Sanders
Brand: C.R. Laurence Part Number: 2200750
Used on Older Model Sanders This shaft is for older 2200 and 2200RP Sanders manufactured until June 1987. The 2200750 Shaft has a slightly smaller diameter on one half of the shaft. The appropriate bearings for this shaft are the 2200735 . | *$140.89 |
 | C.R. LAURENCE ERB2 CRL Ball Caster for IG Tables
Brand: C.R. Laurence Part Number: ERB2
Will Not Scratch the Glass This spherical CRL Ball Caster is two inches (51 millimeters) in diameter, made of neoprene, and is used on ball caster-type Transfer , Inspection and Tilt tables. The balls will not scratch the glass as it glides over them. | *$14.03 |
 | C.R. LAURENCE GRA101 CRL Guide Roller Bar Adapter
Brand: C.R. Laurence Part Number: GRA101
Fits on PA100 Platen Adapter Holds Guide Roller Bar GRB102 This CRL Guide Roller Bar Adapter fits into the Platen Adapter and holds the Guide Roller Bar . Special slots for mounting screws allow up and down adjustment for glass thickness. | *$139.70 |
 | C.R. LAURENCE DMC5GL CRL 5 Gallon Diamond Machine Coolant
Brand: C.R. Laurence Part Number: DMC5GL
High Performance Lubricant for Glass Edging and Beveling Machines Extends Tool Life Water Based CRL Diamond Machine Coolant is a high-performance, cost effective lubricant that is highly concentrated. The concentation on this product is usually between 50:1 to 100:1. With addition at tank side or by automated metering equipment, this product accomodates grinding bevels of up to two inches (50.8 millimeters). CRL DMC55 is considered a heavy duty lubricant that can even extend the life of the sump. It is designed with long-lasting microbiological protection suited for heavy use situations experienced in even the largest of glass facilities. It also reduces the development of "popcorn" particles during grinding to keep the lines clear. CRL DMC55 is manufactured with the environment in mind, using a water-based formulation containing absolutely no oil. It is also pH-controlled at moderate levels to facilitate operator handling. | *$137.99 |
 | C.R. LAURENCE 0377028 CRL Panther Edger Replacement Drive Belt
Brand: C.R. Laurence Part Number: 0377028
Designed for CRL Panther Edger This CRL Replacement Drive Belt is used on all original belt driven Panther Glass Edger's. Over time these belts stretch and wear, and need replacing. Should be replaced during a major machine overhaul. Its two inch (51 millimeter) width is standard. Minimum Order: 1 Each | *$137.88 |
 | C.R. LAURENCE 0377111 CRL Panther Edger 110 Volt Coolant Pump
Brand: C.R. Laurence Part Number: 0377111
Designed for CRL's Panther Edger This high quality pump was designed for use with the CRL Panther Edger . It delivers Coolant to the Grinding Wheel and at the same time it lubricates the surrounding machine parts. The pump sits in the tank and usually works best if it is suspended from the bottom, as it will not be as prone to contaminants. Periodic cleaning of the sediment screen will prolong the life of the pump. | *$137.22 |
 | C.R. LAURENCE 39666000 Somaca/CRL VE-1P Orange Polish Wheel for 1/8 to 1/2 Glass
Brand: C.R. Laurence Part Number: 39666000
Spindle Peripheral Edger Wheel for VE1P Edger Somaca/CRL VE-1P Spindle Peripheral Edger Wheels are available for Pencil Edge or Flat and Seam Edge for 1/8 inch to 1/2 inch thick glass. Dimensions: 7 in (178 mm) Grit: 140-170 | *$136.90 |
 | C.R. LAURENCE PA100 CRL Platen Adapter
Brand: C.R. Laurence Part Number: PA100
Supplied on 2200 Series Upright Sanders Used for Adding Roller, Bar, Flat Platen and or a Guide Roller Bar To add a Bar , Flat or Roller Platen and/or a Guide Roller Bar to a 100BM Sander , you need this part. It's standard equipment on the 2200 and 2200RP sanders. | *$136.87 |
 | C.R. LAURENCE 39449002 Somaca/CRL Replacement Felt Ring for 39448902
Brand: C.R. Laurence Part Number: 39449002
For Model 752 and 761 Machines This Somaca/CRL Replacement Felt Ring is a replacement part for catalog number 39448902, and is designed for Model 752 and 761 machines. | *$136.82 |
 | C.R. LAURENCE 1100KR CRL Upright Belt Sander Upper Pulley Bearings
Brand: C.R. Laurence Part Number: 1100KR
Fits Series 200 2000 Belt Machines This CRL Upper Pulley Bearing is inserted into the pulley, which is then placed on a one inch (25 millimeter) shaft. | *$135.82 |
 | C.R. LAURENCE GL4SS CRL Belt Guard Safety Shield for GL4W and CN4106
Brand: C.R. Laurence Part Number: GL4SS
Guards From Flying Debris The CRL Belt Guard Safety Shield fits our model GL4W and CN4106 Belt Sanders. Protects your face and eyes from flying debris, giving you added safety. This is an attachment no shop with a GL4W and CN4106 should be without. Simple installation takes just minutes, and gives you extra protection for the life of your sander. | *$135.68 |
