 | Equine Master Electric Fence Energizer/Charger
Brand: LACME
A 1 Joule (25 mile) energizer designed for equine control. For pastures up to 50 acres. It provides auto monitoring of the fence when the fence is looped back to the energizer. It uses 110 volts and 1 Watt power consumption. It is designed specifically to energize long distances of polytapes, polyropes and polywires, without overpowering the animal which could result in physiological damage or instill fear of an electric fence in highly sensitive animals. The pulse is regulated so as not the cause premature aging or deterioration of the filaments in polytapes, polyropes or polywires. It is also designed to be used with aluminum or steel wire. For added peace of mind, purchase and install the lightning diverter. | *$100.00 |
 | Blue Polywire for Electric Fence - Extrafor
Brand: LACME
EXTRAFOR All purpose Polywire. This poly wire uses 2 large diameter galvanized steel wires located on the outside of the filament for full exposure and contact with the wire. This is a highly visible wire because of its thickness and exeptional brightness. Highly dependable polywire. Highly resistant to sparking and frequent handling. The two wires have an extra heavy galvanized coating of 120 g/m2. Extra flexible multi strand around a central core of polyethylene makes this product flexible while retaining its strength. It can be used for permanent or temporary fencing. | *$10.00 |
 | White Polywire for Electric Fence - Blanfor
Brand: LACME
BLANFOR All purpose Polywire. This polywire uses 2 large diameter galvanized steel wires located on the outside of the filament for full exposure and contact with the wire. This is a highly visible wire because of its thickness and exeptional brightness. Highly dependable poly wire. Highly resistant to sparking and frequent handling. The two wires have an extra heavy galvanized coating of 120 g/m2. Extra flexible multi strand around a central core of polyethylene makes this product flexible while retaining its strength. It can be used for permanent or temporary fencing. | *$10.00 |
 | Landware/Tenax 191049 Snow Fence and Construction Fence
Brand: LandWare Part Number: 191049
Snow fence is a great and economical way to reduce snow removal load during the winter months. Use along driveways and for controlling drifting snow near pathways and entrances. 4' high. Orange. Actual mesh size: 1.75'' x 1.75''. No. 190042: 50' length No. 191049: 100' length | *$49.99 |
| Landware/Tenax 190042 Snow Fence and Construction Fence
Brand: LandWare Part Number: 190042
Snow fence is a great and economical way to reduce snow removal load during the winter months. Use along driveways and for controlling drifting snow near pathways and entrances. 4' high. Orange. Actual mesh size: 1.75'' x 1.75''. No. 190042: 50' length No. 191049: 100' length | *$26.99 |
 | Landware/Tenax 601906 All-Purpose Net
Brand: LandWare Model: 601906 Part Number: 601906
Lightweight visually unobtrusive net ideally suited to protect a wide range of fruits and vegetables from birds. Its versatile nature also makes it an ideal cover for small garden ponds, protecting ornamental fish from predatory birds and keeping fall lea | *$18.11 |
 | LANDWARE (TENAX) 399797 MULTI-PURPOSE NET 2'x50' - BLACK
Brand: Landware Model: 399797 Part Number: 399797
"LANDWARE" MULTI-PURPOSE NET
Heavy duty .8"MD x .89"TD (referred
commonly as 3/4" x 1" mesh)
Polypropylene
UV stabilized
Installs with staples
Cuts with scissors
Use for animal protection and
confinement, temporary fencing,
trellises, and insulation support
Black
Shrink-wrapped
24"H x 50L | *$17.49 |
 | Landware/Tenax 001096 Deer Fence
Brand: LandWare Part Number: 001096
A heavy grade netting with a mesh size of 1.77'' x 1.96''. Recommended for enclosing areas with light deer traffic and sporadic deer damage. Stronger than deer net, this product not only blends into the background, but gives the security and strength of a metal fence. 7.5' x 100'. Color: Black. 25 per pallet. | *$109.99 |
 | 07a1716 H7a 7-1/2" long 1-1/16" Diameter Ship Auger (433-31037) Category: Auger Drill Bits
Brand: Lenox Part Number: 433-31037
Item #: 433-31037. Cutting angle reinforces cutting edge for greater durability to withstand the impact of encountering a nailbrSecondary relief angle removes material fasterbrOversized cutting head creates a hole larger than the bit for easy removal from the workpiecebrPower groove on shank fits Lenox® Uni-Drive System? for convenient bit changes pulliCutting Diameter = 1 1/16 inliBit/Blade Mounting Cutting Flute Length = 5 5/16 inliOverall Length = 7 1/2 inliApplicable Materials = WoodliCutter Cutting Direction = RightliMeasurement Type = FractionalliNo. of Flutes = 1liPacking Point Angle = 60°liType = Wood Boring BitliQuantity = 1 per pack/ul brCustomers also search for: Discount 07a1716 H7a 7-1/2" long 1-1/16" Diameter Ship Auger, Buy 07a1716 H7a 7-1/2" long 1-1/16" Diameter Ship Auger, Wholesale 07a1716 H7a 7-1/2" long 1-1/16" Diameter Ship Auger, 082472310375, 31037, Auger Drill Bits | *$32.33 |
| 07a1216 H7a 7-1/2" long 3/4" dia Ship Auger (433-31032) Category: Auger Drill Bits
Brand: Lenox Part Number: 433-31032
Item #: 433-31032. Cutting angle reinforces cutting edge for greater durability to withstand the impact of encountering a nailbrSecondary relief angle removes material fasterbrOversized cutting head creates a hole larger than the bit for easy removal from the workpiecebrPower groove on shank fits Lenox® Uni-Drive System? for convenient bit changes pulliCutting Diameter = 3/4 inliBit/Blade Mounting Cutting Flute Length = 5 5/16 inliOverall Length = 7 1/2 inliApplicable Materials = WoodliCutter Cutting Direction = RightliMeasurement Type = FractionalliNo. of Flutes = 1liPacking Point Angle = 60°liType = Wood Boring BitliQuantity = 1 per pack/ul brCustomers also search for: Discount 07a1216 H7a 7-1/2" long 3/4" dia Ship Auger, Buy 07a1216 H7a 7-1/2" long 3/4" dia Ship Auger, Wholesale 07a1216 H7a 7-1/2" long 3/4" dia Ship Auger, 082472310320, 31032, Auger Drill Bits | *$17.86 |
| 07a1016 H7a 7-1/2" long 5/8" dia Ship Auger (433-31030) Category: Auger Drill Bits
Brand: Lenox Part Number: 433-31030
Item #: 433-31030. Cutting angle reinforces cutting edge for greater durability to withstand the impact of encountering a nailbrSecondary relief angle removes material fasterbrOversized cutting head creates a hole larger than the bit for easy removal from the workpiecebrPower groove on shank fits Lenox® Uni-Drive System? for convenient bit changes pulliCutting Diameter = 5/8 inliBit/Blade Mounting Cutting Flute Length = 5 5/16 inliOverall Length = 7 1/2 inliApplicable Materials = WoodliCutter Cutting Direction = RightliMeasurement Type = FractionalliNo. of Flutes = 1liPacking Point Angle = 60°liType = Wood Boring BitliQuantity = 1 per pack/ul brCustomers also search for: Discount 07a1016 H7a 7-1/2" long 5/8" dia Ship Auger, Buy 07a1016 H7a 7-1/2" long 5/8" dia Ship Auger, Wholesale 07a1016 H7a 7-1/2" long 5/8" dia Ship Auger, 082472310306, 31030, Auger Drill Bits | *$17.86 |
 | Little Beaver Little Beaver To General Augers #9051-GENS
Brand: Little Part Number: 9051-GENS
Little Beaver to General Auger 1-3/8" Hex Model M330H | *$75.50 |
 | Little Beaver Ground Hog Power Unit #9051-GHLB
Brand: Little Part Number: 9051-GHLB
Ground Hog Power Unit to Little Beaver 1-1/4" auger | *$75.50 |
 | Little Beaver Spring Button #9058
Brand: Little Part Number: 9058 | *$6.80 |
 | Little Beaver Tube; Extension,18" #9054-A
Brand: Little Part Number: 9054-A | *$48.00 |
 | Little Beaver Post Hole Digger GX240 Honda #MDL-8H
Brand: Little Part Number: MDL-8H
Patented Torque Tube - easy drilling with no kickback; Transmission - 10.1 ratio works at low RPM with high torque; Heavy-Duty Clutch - Designed to protect the gears and shafts in the transmission; Augers sold separately - Choose Standard, Carbide Tip or Pengo Augers in the following sizes 4", 6", 8", 10", 12" 16"; Applications include: Fencing, soil testing, planting, sign erection, soil overlay, plumbing, anode installing, foundation repair, geophysical, horizontal drilling, mobile home anchoring, landscaping, percolation test, water well drilling | *$2,450.00 |
 | Little Beaver Adaptor 1-3/8-Hex To 1-1/4-SQ #9052-GEN
Brand: Little Part Number: 9052-GEN
General Unit Female 1-3/8" to Little Beaver 1-1/4" augers | *$107.00 |
| Little Beaver Post Hole Digger GX160 Honda #MDL-5H
Brand: Little Part Number: MDL-5H
Honda GX160 engine; Patented Torque Tube - easy drilling with no kickback; Transmission - 10.1 ratio works at low RPM with high torque; Heavy-Duty Clutch - Designed to protect the gears and shafts in the transmission; Augers sold separately - Choose Standard, Carbide Tip or Pengo Augers in the following sizes 4", 6", 8", 10", 12" 16"; Applications include: Fencing, soil testing, planting, sign erection, soil overlay, plumbing, anode installing, foundation repair, geophysical, horizontal drilling, mobile home anchoring, landscaping, percolation test, water well drilling | *$1,940.00 |
 | Mag-Bit 701.0616 3/8" Diameter x 7-7/8" Overall Length x 5" Twist Length x 3/8" Shank Single Spur Auger Bit
Brand: Mag-Bit Part Number: 701.0616
Single spur opposite cutting lip for clean entrance and exit holes and a self-feed screw point for fast, effortless boring. Two recesses in shank to allow for extension set screws (5/8" and larger sizes). | *$5.75 |
 | Marshalltown LS24 2-Inch to 4-Inch Mason's Line Stretchers
Brand: Marshalltown Model: LS24 | *$9.49 |
 | Marshalltown LS68 6-Inch to 8-Inch Mason's Line Stretchers
Brand: Marshalltown Model: LS68 Part Number: LS68
Stretches mason line between blocks. Sold only in pairs. | *$8.45 |
 | Marshalltown ALS504 Aluminum Adjustable Line Stretchers
Brand: Marshalltown Model: ALS504 Part Number: 16504
Pair, Cast Aluminum Line Stretchers To Stretch Mason Lines Between Key Course Blocks, Fully Adjustable From 4" To 12", Bag. | *$6.99 |
| | Marshalltown LS812 8-Inch to 12-Inch Mason's Line Stretchers
Brand: Marshalltown Model: LS812 Part Number: 16503
Item #: 632-16503. Feature extended tapered jaws and a compact handle for those hard-to-reach jobsbrWide mouth design provides extra capacity with shorter handle length, i.e., 6" Wide Mouth has same capacity as normal 8" adjustable wrenchbrHigh grade Chrome-Vanadium alloy steel forged and heat treated for maximum strength and durabilitybrSuperior resistance to rust and corrosion pulliOpening Size = 7/8 in [Max]liHook Hook Overall Length = 6 inliHandle Material = Chrome-Vanadium SteelliFinish = Cobalt PlatedliJaw Packing /ul brCustomers also search for: Discount Model 776 6" Plumber's Wide Mouth Adjustable Wre, Buy Model 776 6" Plumber's Wide Mouth Adjustable Wre, Wholesale Model 776 6" Plumber's Wide Mouth Adjustable Wre, 095691165039, 16503, Adjustable Wrenches | *$11.49 |
 | Martatch Skid Loader Bucket - 72in. Large Profile, Model# MB72L
Brand: Martatch
Heavy-duty steel bucket is MIG welded and features hardened cutting edge. Fits any universal quick attach. Black painted finish. Truck ship. Factory shipped. | *$829.99 |
 | Martatch Skid Loader Bucket - 72in. Medium Profile, Model# MB72M
Brand: Martatch
Heavy-duty steel bucket is MIG welded and features hardened cutting edge. Fits any universal quick attach. Black painted finish. Truck ship. Factory shipped. | *$799.99 |
 | Martatch Skid Loader Bucket - 60in. Large Profile, Model# MB60L
Brand: Martatch
Heavy-duty steel bucket is MIG welded and features hardened cutting edge. Fits any universal quick attach. Black painted finish. Truck ship. Factory shipped. | *$749.99 |
 | Martatch Skid Loader Bucket - 60in. Medium Profile, Model# MB60M
Brand: Martatch
Heavy-duty steel bucket is MIG welded and features hardened cutting edge. Fits any universal quick attach. Black painted finish. Truck ship. Factory shipped. | *$729.99 |
 | Master Halco 087036 Aluminum Fence Tie
Brand: Master Halco Model: 87036 Part Number: 087036
Fence tie, aluminum 6 1 2", 11 gauge for chainlink fencing. 30 per bag. | *$1.44 |
 | Master Mark Plastics #61203 97" Driftwood H Channel
Brand: Master Mark Model: 61203 Part Number: 61203
97"L, Driftwood H-Channel, Easy Installation, Join Several Panels Together, Made From Hdpe Plastic, Colored Throughout Is UV Resistant, For Use With Lattice Panels. | *$9.99 |
 | Master Mark Plastics #64833 4x8 Drift Privacy Lattice
Brand: Master Mark Part Number: 64833
4' x 8', Driftwood Privacy Lattice Panel. | *$47.98 |
 | Master Mark Plastics #61103 97" Driftwood C Channel
Brand: Master Mark Part Number: 61103
97"L, Driftwood C-Channel, Easy Installation, Cap Off End Lattice, Made Of Hdpe Plastic, Colored Throughout Is UV Stabilized, For Use With Lattice Panels. | *$12.04 |
 | 48X50 3X2 GREEN TL FENCE COLOR:GREEN SIZE:48"X 50 FT.
Brand: Mazel Part Number: 50605048G
TOT AND LOT FENCE - Contemporary design ~ Plastic on steel fence ~ 2-1/2"x 2" welded mesh fabric ~ Perfect fencing for play areas-pet confinement ~ Use for decorative trellises | *$37.82 |
 | 36 2X4 14GA 50 WELD FABRIC DESC:14 GA-2"X4" SIZE:36"X 50 FT.
Brand: Mazel Part Number: 8050503624
WELDED UTILITY FABRIC - Galvanized before fabrication ~ Provides a versatile low-cost material ~ Use for enclosing protecting reinforcing ~ Partitioning backstops tennis courts ~ Tree window guards ~ DESC gives wire gauge and spacing size ~ Sold by the roll with retail price by the foot | *$37.34 |
 | Tot And Lot Fence - 36In. X50ft. 3X2 Green TL Fence
Brand: Mazel Part Number: 50605036G
TOT AND LOT FENCE - Contemporary design ~ Plastic on steel fence ~ 2-1/2"x 2" welded mesh fabric ~ Perfect fencing for play areas-pet confinement ~ Use for decorative trellises | *$31.40 |
 | 28X50 GR VINYL GARDEN FENCE SIZE:28" X 50 FT.
Brand: Mazel Part Number: 50905028G
GREEN VINYL GARDEN FENCE - Attractive garden fence with graduated spacing ~ Smaller at bottom for maximum protection ~ Green vinyl coating for corrosion resistance | *$23.94 |
 | Galvanized Cage Wire - 24In. X25ft. 1X2x14 Galv Cage Wire
Brand: Mazel Part Number: 8010252412
MAZEL CO. 8010252412 24X25 CAGE WIRE | *$22.77 |
 | 28X50 GALV GARDEN FENCE SIZE:28" X 50 FT.
Brand: Mazel Part Number: 50905028
GALVANIZED GARDEN FENCE - Sturdy garden fence with graduated spacing ~ Smaller at bottom for maximum protection ~ Galvanized for corrosion resistance | *$17.98 |
 | Mepco Auger 4X34 #13716
Brand: Mepco Part Number: 13716 | *$76.17 |
 | Mepco Replacement Blade 8-IN F/2052 #9885
Brand: Mepco Part Number: 9885 | *$16.83 |
| Mepco Replacement Blade 4-IN #23178
Brand: Mepco Part Number: 23178 | *$14.50 |
 | Hitch Ball (1-7/8 X 3/4 X 1-3/4 Inches)
Brand: Michigan Industrial Tools Part Number: 6070
This Hitch Ball has a drop forged carbon steel construction with a durable chrome plated finish that resist rust and corrosion. It has a precision-machined bolt with lock washer and nut. It will fit any standard hitch coupler that accepts a 1-7/8 inch ball. | *$9.80 |
 | 2" x 3" Hitch Ball Coupler
Brand: Michigan Industrial Tools Part Number: 6087
Specifications:
Drop Forged, Heat Treated
Flanged Steel Construction
Sturdy, Riveted Tongue
Lock with Spring Release
Use with Industrial, Commercial, Utility Agricultural, and Recreational Equipment
Contents:
Hitch Ball Diameter: 2"
Tongue Width: 3"
Class: II
Towing Capacity: 3,500 LBS | *$23.50 |
 | 2" x 2" Hitch Ball Coupler
Brand: Michigan Industrial Tools Part Number: 6088
Specifications:
Drop Forged, Heat Treated
Flanged Steel Construction
Sturdy, Riveted Tongue
Lock with Spring Release
Use with Industrial, Commercial, Utility Agricultural, and Recreational Equipment
Contents:
Hitch Ball Diameter: 2"
Tongue Width: 2"
Class: II
Towing Capacity: 3,500 LBS | *$22.70 |
 | 2" x 2-1/2" Hitch Ball Coupler
Brand: Michigan Industrial Tools Part Number: 6086
Specifications:
Drop Forged, Heat Treated
Flanged Steel Construction
Sturdy, Riveted Tongue
Lock with Spring Release
Use with Industrial, Commercial, Utility Agricultural, and Recreational Equipment
Contents:
Hitch Ball Diameter: 2"
Tongue Width: 2-1/2"
Class: II
Towing Capacity: 3,500 LBS | *$22.70 |
 | 1-7/8" x 2-1/2" Hitch Ball Coupler
Brand: Michigan Industrial Tools Part Number: 6084
Specifications:
Drop Forged, Heat Treated
Flanged Steel Construction
Sturdy, Riveted Tongue
Lock with Spring Release
Use with Industrial, Commercial, Utility Agricultural, and Recreational Equipment
Contents:
Hitch Ball Diameter: 1-7/8"
Tongue Width: 2-1/2"
Class: I
Towing Capacity: 2,000 LBS | *$16.50 |
 | 2-5/16" x 1" Trailer Hitch Ball
Brand: Michigan Industrial Tools Part Number: 6080
Drop Forged Carbon Steel Construction
Chrome Plated for Durability
Precision-Machined Bolt
Complete with Lock Washer and Hex Nut
Fits Standard Ball and Socket Couplers
Hitch Ball Diameter: 2-5/16"
Bolt Dia.: 1"
Bolt Length: 2-1/2"
Towing Capacity: 5000 LBS | *$13.98 |
 | Hitch Ball (2 X 1 X 2-1/2 Inches)
Brand: Michigan Industrial Tools Part Number: 6078
This Hitch Ball has a drop forged carbon steel construction with a durable chrome plated finish that resist rust and corrosion. It has a precision-machined bolt with lock washer and nut. It will fit any standard hitch coupler that accepts a 2 inch ball. | *$12.38 |
 | Hitch Ball (1-7/8 X 1 X 2-1/2 Inches)
Brand: Michigan Industrial Tools Part Number: 6069
This Hitch Ball has a drop forged carbon steel construction with a durable chrome plated finish that resist rust and corrosion. It has a precision-machined bolt with lock washer and nut. It will fit any standard hitch coupler that accepts a 1-7/8 inch ball. | *$11.00 |
 | Hitch Ball (2 X 3/4 X 2-1/2 Inches)
Brand: Michigan Industrial Tools Part Number: 6077
This Hitch Ball has a drop forged carbon steel construction with a durable chrome plated finish that resist rust and corrosion. It has a precision-machined bolt with lock washer and nut. It will fit any standard hitch coupler that accepts a 2 inch ball. | *$10.90 |
 | 2" x 3/4" x 1-3/4" Hitch Ball
Brand: Michigan Industrial Tools Part Number: 6075
Drop Forged Carbon Steel Construction
Chrome Plated for Durability
Precision-Machined Bolt
Complete with Lock Washer and Hex Nut
Fits Standard Ball and Socket Couplers
Hitch Ball Diameter: 2"
Bolt Dia.: 3/4"
Bolt Length: 1-3/4"
Towing Capacity: 3500 LBS | *$10.80 |
